{"title":"Hertz Car Audio Speakers | Subwoofers | Amplifiers","description":"Hertz manufacture speakers, subwoofers and amplifiers for the car audio industry. Hertz speakers are known for their power and clarity. Hertz pride themselves on their experience and innovation for constantly improving.","products":[{"product_id":"hertz-mille-legend-mlk-1650-3-car-audio-speaker-system","title":"Hertz Mille Legend MLK 1650.3 - Speaker System","description":"\u003cp\u003eThe Hertz Mille Legend MLK 1650.3 speaker system is a two way kit dedicated to purists , aiming at achieving maximum timbre consistency combined with very high dynamics and extremely extended frequency response.\u003c\/p\u003e\n\u003cp\u003eThrough a solidly built switch, the MLCX 2 TW.3 crossover provides the ability to realise a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately.\u003c\/p\u003e\n\u003cp\u003eThe significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification.\u003c\/p\u003e\n\u003cp\u003eBesides, thanks to the Mid-Contour and Hi-Countor controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied.\u003c\/p\u003e\n\u003cp\u003eThrough each of these two “Countor” controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve thieir favourite sound.\u003c\/p\u003e\n\u003ch3\u003eHerzt Mille Legend MLK 1650.3 - Product Features\u003c\/h3\u003e\n\u003ch3\u003eML 280.3 Legend\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNeodymium magnet optimized with FEA simulations of the magnetic flux for utmost control and fast response to the transients.\u003c\/li\u003e\n\u003cli\u003eExtremely pure copper short circuit ring, for excellent very high frequency extension.\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium face plate with profile optimized with FEA simulations to improve frequency response and dispersion.\u003c\/li\u003e\n\u003cli\u003eTetolon Fiber dome optimized with FEA simulations for lower distortion and improved dispersion in high frequency range.\u003c\/li\u003e\n\u003cli\u003eFrame structure and rear load chamber both derived from a CNC machined solid aluminium block, to ensure mechanically inert response to resonances.\u003c\/li\u003e\n\u003cli\u003eRear chamber sized for only 900 Hz Fs: low Fs ensures wide extension in low frequency range and low distortion also in the crossing section, allowing a decreased cut-off frequency.\u003c\/li\u003e\n\u003cli\u003eHigh-density damping material underneath the dome, low-density absorbing material in the rear chamber, providing fluid acoustic emission and high damping in the low frequency response.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eML 1650.3 Legend\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNeodymium magnet optimized with FEA simulations for real dynamics and utmost control.\u003c\/li\u003e\n\u003cli\u003eVery low carbon content CNC machined plates, for maximum magnetic permeability and low distortion at high power levels.\u003c\/li\u003e\n\u003cli\u003eAluminium covered pole for a linear impedance modulation and low distortion.\u003c\/li\u003e\n\u003cli\u003e36 mm CCAW double layer voice coil wound on a Polyamide former for exceptional power handling and compression-free re production even in the most demanding musical passages.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® with optimized geometry for utmost linearity and dispersion at mid frequency range.\u003c\/li\u003e\n\u003cli\u003e“Boundary Free” IIR rubber surround, for better efficiency and wider mid-bass frequency.\u003c\/li\u003e\n\u003cli\u003ePressed-pulp cone with cotton fibres, combining stiffness and lightweight, to achieve wide frequency response and limited break-ups at high frequency.\u003c\/li\u003e\n\u003cli\u003eThree-spoke, very acoustically transparent anti-resonant aluminium alloy basket featuring built-in venting holes.\u003c\/li\u003e\n\u003cli\u003eCNC machined elegant diamond-cut basket edge featuring the Hertz logo.\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium factory provided grille featuring diamond-cut aluminium Hertz logo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMLCX 2 TW.3 Legend\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBi-amplification available, selectable through appropriate hi-current rating switch with hi-current carrying capability.\u003c\/li\u003e\n\u003cli\u003e“Mid-Contour” two-position control, for a linear mid-bass frequency response according to the woofers position in the car and the listener’s favourite sound.\u003c\/li\u003e\n\u003cli\u003e“Hi-Contour” two-position control, to select the tweeter hi-pass crossover point selection according to the tweeter position\/angle towards the listener.\u003c\/li\u003e\n\u003cli\u003e“Mid-Contour” in conjunction with “Hi-Contour” provides the ability to use MLCX 2 TW.3 to build a two way system based on ML 1650.3 or ML 1800.3 woofer together with ML 280.3 tweeter.\u003c\/li\u003e\n\u003cli\u003eThree-position switch for tweeter level adjustments in 2 dB steps, to fine-tune the transducer’s emission.\u003c\/li\u003e\n\u003cli\u003e“Hi-Boost” control, selectable through appropriate switch, to provide better linearity of the tweeter emission above 10kHz when positioned not on axis to with the listener.\u003c\/li\u003e\n\u003cli\u003eExtremely high quality bi-metallized 160V polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid\/hi-frequencies.\u003c\/li\u003e\n\u003cli\u003eAir wound inductors built on pure copper-wire with up to 1mm diameter, for high saturation threshold of the magnetic flux and low losses on the woofer section where high transient currents are demanded.\u003c\/li\u003e\n\u003cli\u003eHigh power rating Wirewound resistors, to ensure performance stability even at high operating temperature. The Wirewound build construction grants low parasitic series inductance thus reducing losses at high frequencies, especially for resistors in series to the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eComponent\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e2-way system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter diaphragm\u003c\/p\u003e\n\u003cp\u003eCrossover\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e165 (6.5)\u003c\/p\u003e\n\u003cp\u003e35 (1.38)\u003c\/p\u003e\n\u003cp\u003e195 x 119 x 41 (7.67 x 4.68 x 1.61)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eVoice Coil Ø\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e36 (1.6)\u003c\/p\u003e\n\u003cp\u003e28 (1.1)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Handling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eW peak\u003c\/p\u003e\n\u003cp\u003eW continuous\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e300\u003c\/p\u003e\n\u003cp\u003e150\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eΩ\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHz\u003c\/td\u003e\n\u003ctd\u003e40 - 28k\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCrossover cut-off\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eWoofer\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003cp\u003eCut-off\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eLo-pass 6 dB Oct.\u003c\/p\u003e\n\u003cp\u003eHi-pass 12 dB Oct.\u003c\/p\u003e\n\u003cp\u003e2.5 kHz (Mid\/Hi-Cont. = ON)\u003c\/p\u003e\n\u003cp\u003e3.5 kHz (Mid\/Hi-Cont. = OFF)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCrossover adjustment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003cp\u003eHi-Boost\u003c\/p\u003e\n\u003cp\u003eHi-Contour\u003c\/p\u003e\n\u003cp\u003eMid-Contour\u003c\/p\u003e\n\u003cp\u003eBi-Amp\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e+2 \/ 0 \/ -2 dB\u003c\/p\u003e\n\u003cp\u003eON \/ OFF\u003c\/p\u003e\n\u003cp\u003eON \/ OFF\u003c\/p\u003e\n\u003cp\u003eON \/ OFF\u003c\/p\u003e\n\u003cp\u003eON \/ OFF\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eWeight of one component\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003cp\u003eCrossover\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e1.29 (2.84)\u003c\/p\u003e\n\u003cp\u003e0.1 (0.22)\u003c\/p\u003e\n\u003cp\u003e0.57 (1.26)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-Legend_Product-Info_2016_revA.pdf\" title=\"Hertz Mille Legend MLK 1650.3 - Tech Sheet\" target=\"_blank\"\u003eHertz Mille Legend MLK 1650.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Esec_Owners-manual-Speaker-mille_revE_x-Web-6.pdf\" title=\"Hertz Mille Legend MLK 1650.3 - User Manual\" target=\"_blank\"\u003eHertz Mille Legend MLK 1650.3 - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31568240214050,"sku":"8018823114004","price":799.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-legend-mlk-1650-3-speaker-system.jpg?v=1649934993"},{"product_id":"hertz-mille-legend-mlk-165-3-car-audio-speaker-system","title":"Hertz Mille Legend MLK 165.3 - Speaker System","description":"\u003cp\u003eThe Hertz Mille Legend MLK 165.3 car audio speaker system is comprised of the ML 28.3 Legend tweeter and the ML 165.3 Legend woofer with the MLCX 165.3 dedicated crossover.\u003c\/p\u003e\n\u003cp\u003eThe woofer originates from the \u003ca href=\"hertz-mille-legend-ml-1650-3-car-audio-woofer\" title=\"Hertz Mille Legend ML 1650.3 Woofer\"\u003eML 1650.3 Legend\u003c\/a\u003e, inheriting all of its technologies such as the Boundary Free Surround, the V-cone profile Pressed-pulp cone with cotton fibres, the six spoke aluminium basket with vented holes; however, it has been designed employing a high density ferrite magnet assembly, characterising its emission in the mid frequency range.\u003c\/p\u003e\n\u003cp\u003eThe ML 28.3 Legend tweeter mounts the same Neodymium magnet assembly as the \u003ca href=\"hertz-mille-legend-ml-280-3-tweeter-set\" title=\"Hertz Mille Legend ML 280.3 Tweeter\"\u003eML 280.3 Legend\u003c\/a\u003e and features all the optimizations made with FEA methods on the dome profile, and that it shares with its “older brother”, except for the most esoteric features such as the die-cast aluminium faceplate, the CNC machined body made from solid aluminium block and the copper short circuit ring.\u003c\/p\u003e\n\u003cp\u003eLike the MLCX 2 TW.3, the MLCX 165.3 crossover also features the “Hi-Contour” control to adjust the ML 28.3 tweeter cut-off frequency and so the crossover-point with the ML 165.3 woofer, according to the position of the two speakers in the car. Through the tweeter three position level control, with 2 dB step attenuation, the level for a correct timbre balance can be fine-tuned according to one’s own tastes.\u003c\/p\u003e\n\u003ch2\u003eHertz Mille Legend MLK 165.3 - Product Features\u003c\/h2\u003e\n\u003ch3\u003eML 28.3 Legend\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDouble Neodymium magnet optimized with FEA simulations, for maximum field symmetry and exceptional transfer efficiency.\u003c\/li\u003e\n\u003cli\u003eTetolon Fiber dome optimized with FEA simulations, for excellent dynamics and angle dispersion.\u003c\/li\u003e\n\u003cli\u003eLarger rear chamber, to reduce Fs from 1000Hz to 900Hz.\u003c\/li\u003e\n\u003cli\u003eNatural fibre non-woven sound-absorption material, for better damping and more natural acoustic emission.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eML 165.3 Legend\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCCAW double-layer 36 mm voice coil on Kapton former, for exceptional power handling and no-compromise dynamics.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® with optimized geometry for better dispersion and higher SPL performance.\u003c\/li\u003e\n\u003cli\u003e“Boundary Free” IIR rubber surround, for higher efficiency.\u003c\/li\u003e\n\u003cli\u003eCotton-injected paper cone for stiffness, lightweight and dynamics.\u003c\/li\u003e\n\u003cli\u003eThree-spoke, anti-resonant aluminium alloy basket featuring built-in venting holes.\u003c\/li\u003e\n\u003cli\u003eHighly acoustic transparent basket design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMLCX 165.3 Legend\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e“Hi-Contour” two-position control, to select the tweeter hi-pass crossover point according to the tweeter position\/angle towards the listener.\u003c\/li\u003e\n\u003cli\u003eThree terminals for tweeter level adjustment in 2 dB steps, to fine-tune the transducer’s emission.\u003c\/li\u003e\n\u003cli\u003eExtremely high quality bi-metallized 160V polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid\/hi-frequencies.\u003c\/li\u003e\n\u003cli\u003eAir wound built on pure copper-wire copper-wire with up to 1mm diameter, for high saturation threshold of the magnetic flux and low losses on the woofer section where high transient currents are demanded.\u003c\/li\u003e\n\u003cli\u003eHigh power rating Wirewound resistors, to ensure performance stability even at high operating temperature. The Wirewound build construction grants low parasitic series inductance thus reducing losses at high frequencies, especially for resistors in series to the tweeter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eComponent\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e2-way system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter diaphragm\u003c\/p\u003e\n\u003cp\u003eCrossover\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e165 (6.5)\u003c\/p\u003e\n\u003cp\u003e35 (1.38)\u003c\/p\u003e\n\u003cp\u003e146 x 114 x 40 (5.74 x 4.49 x 1.57\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eVoice Coil Ø\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e36 (1.6)\u003c\/p\u003e\n\u003cp\u003e28 (1.1)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Handling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eW peak\u003c\/p\u003e\n\u003cp\u003eW continuous\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e300\u003c\/p\u003e\n\u003cp\u003e150\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eΩ\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHz\u003c\/td\u003e\n\u003ctd\u003e40 - 25k\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCrossover cut-off\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLo\/Hi-pass\u003c\/td\u003e\n\u003ctd\u003e3.5 kHz -12 dB Oct\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCrossover adjustment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTweeter Level\u003c\/p\u003e\n\u003cp\u003eHi-Contour\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e+2 \/ 0 \/ -2 dB\u003c\/p\u003e\n\u003cp\u003eON \/ OFF\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eWeight of one component\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003cp\u003eCrossover\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e1.65 (3.64)\u003c\/p\u003e\n\u003cp\u003e0.075 (0.16)\u003c\/p\u003e\n\u003cp\u003e0.37 (0.82)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Hertz_TechSheet_MLK-165_3_revD.pdf\" title=\"Hertz Mille Legend MLK 165.3 - Tech Sheet\" target=\"_blank\"\u003eHertz Mille Legend MLK 165.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Esec_Owners-manual-Speaker-mille_revE_x-Web-7.pdf\" title=\"Hertz Mille Legend MLK 165.3 - User Manual\" target=\"_blank\"\u003eHertz Mille Legend MLK 165.3 - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31568211836962,"sku":"8018823114028","price":499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-legend-mlk-165-3-speaker-system.jpg?v=1649934571"},{"product_id":"hertz-mille-legend-mlk-700-3-car-audio-speaker-system","title":"Hertz Mille Legend MLK 700.3 - Speaker System","description":"\u003cp\u003eThe Hertz Mille Legend MLK 700.3 car audio speaker system aims at offering a mid-high frequency range of excellence, to combine with a Legend woofer with a choice between \u003ca href=\"hertz-mille-legend-ml-1650-3-car-audio-woofer\" title=\"Hertz Mille Legend ML 1650 Woofers\"\u003eML 1650.3\u003c\/a\u003e and \u003ca href=\"hertz-mille-legend-ml-1800-3-7-inch-woofer\" title=\"Hertz Mille Legend ML 1800 Woofers\"\u003eML 1800.3\u003c\/a\u003e actively filtered in a multi-amplified configuration.\u003c\/p\u003e\n\u003cp\u003eThe Mille Legend MLK 700.3 is composed of the ML 700.3 Legend Extended Midrange, the \u003ca href=\"hertz-mille-legend-ml-280-3-tweeter-set\" title=\"Hertz Mille ML 280.3 Tweeters\"\u003eML 280.3 Legend tweeter\u003c\/a\u003e and the MLCX 2 TM.3 dedicated crossover that features the unique Mid-Countour control with its three-position selector, acting on the mid frequencies of the ML 700.3 Legend midrange by varying the cross-point with the tweeter to obtain the desired sound.\u003c\/p\u003e\n\u003cp\u003eThe V-cone® exponential profile without the traditional dustcap gets close to perfect, generating exceptional dispersion: thanks to the synergistic action of these technological elements. The ML700.3 Legend boasts outstanding high frequency extension making it possible to build purist two-way systems in combination with ML 1650.3 Legend or ML 1800.3 Legend.\u003c\/p\u003e\n\u003cp\u003eThanks to this configuration, where there is only one cross-point, phase rotations are limited to the minimum, ensuring excellent soundstage and disarming timbre consistency. With the mid-high frequencies being handled by the ML700.3 Legend and the low ones by the ML1800.3 Legend, the whole audio range is reproduced with transducers built with the same materials and based on the same electro-acoustic structure; that doesn’t happen with woofer and tweeter, since due to its own nature the tweeter is different in materials and structure.\u003c\/p\u003e\n\u003cp\u003eThe uniformity in materials and structures creates very high timbre consistency, so the speakers can “disappear” and leave room to emotions.\u003c\/p\u003e\n\u003ch2\u003eHertz Mille Legend MLK 700.3 - Product Features\u003c\/h2\u003e\n\u003ch3\u003eML 280.3 Legend\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNeodymium magnet optimized with FEA simulations of the magnetic flux for utmost control and fast response to the transients.\u003c\/li\u003e\n\u003cli\u003eExtremely pure copper short circuit ring, for excellent very high frequency extension.\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium face plate with profile optimized with FEA simulations to improve frequency response and dispersion.\u003c\/li\u003e\n\u003cli\u003eTetolon Fiber dome optimized with FEA simulations for lower distortion and improved dispersion in high frequency range.\u003c\/li\u003e\n\u003cli\u003eFrame structure and rear load chamber both derived from a CNC machined solid aluminium block, to ensure mechanically inert response to resonances.\u003c\/li\u003e\n\u003cli\u003eRear chamber sized for only 900 Hz Fs: low Fs ensures wide extension in low frequency range and low distortion also in the crossing section, allowing a decreased cut-off frequency.\u003c\/li\u003e\n\u003cli\u003eHigh-density damping material underneath the dome, low-density absorbing material in the rear chamber, providing fluid acoustic emission and high damping in the low frequency response.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eML 700.3 Legend\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNeodymium magnet optimized with FEA simulations, for superior dynamics and control.\u003c\/li\u003e\n\u003cli\u003eVery low carbon content CNC machined plates, for maximum magnetic permeability and low distortion at high power levels.\u003c\/li\u003e\n\u003cli\u003eExtremely pure copper covered central pole and one-layer mobile coil, for a wider extension in the high frequency range.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® with optimized geometry for utmost linearity and dispersion.\u003c\/li\u003e\n\u003cli\u003eCONEX spider with optimized profile, for maximum transparent acoustics at mid-high frequency.\u003c\/li\u003e\n\u003cli\u003e“Boundary Free” IIR rubber surround, for better efficiency and wider mid-bass frequency.\u003c\/li\u003e\n\u003cli\u003ePressed-pulp cone with cotton fibres, combining stiffness and lightweight, to achieve wide frequency response and limited break-ups at high frequency.\u003c\/li\u003e\n\u003cli\u003eJunction point between cone and former with geometry optimized with FEA methods, allowing a more integral coupling, thus ensuring wider extension at high frequency.\u003c\/li\u003e\n\u003cli\u003eThree-spoke, very acoustically transparent anti-resonant aluminium alloy basket featuring built-in venting holes.\u003c\/li\u003e\n\u003cli\u003eCNC machined elegant diamond-cut basket edge featuring the Hertz logo.\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium factory provided grille featuring diamond-cut aluminium Hertz logo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMLCX 2 TM.3 Legend\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e“Mid-Notch” function, a sophisticated notch passive network featuring a three-position switch to select the amount of acoustic effect. It also provides the ability to linearize the midrange frequency response according to its position in the car and considering the woofer selected to complete the system low frequency range.\u003c\/li\u003e\n\u003cli\u003eThree terminals for tweeter level adjustment in 2 dB steps, to fine-tune the transducer’s emission.\u003c\/li\u003e\n\u003cli\u003eExtremely high quality 160V ultra-low DF polyester bi-metallized film capacitors, for maximum sound transparency and neat mid\/hi-frequencies.\u003c\/li\u003e\n\u003cli\u003eAir wound inductors built on pure copper-wire with up to 1mm diameter, for high saturation threshold of the magnetic flux and low losses on the woofer section where high transient currents are demanded.\u003c\/li\u003e\n\u003cli\u003eHigh power rating Wirewound resistors, to ensure performance stability even at high operating temperature. The Wirewound construction grants low parasitic series inductance thus reducing losses at high frequencies, especially for resistors in series to the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eComponent\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e2-way system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMidrange\u003c\/p\u003e\n\u003cp\u003eTweeter diaphragm\u003c\/p\u003e\n\u003cp\u003eCrossover\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e70 (3)\u003c\/p\u003e\n\u003cp\u003e35 (1.38)\u003c\/p\u003e\n\u003cp\u003e195 x 119 x 41 (7.67 x 4.68 x 1.61)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eVoice Coil Ø\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMidrange\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e20 (0.8)\u003c\/p\u003e\n\u003cp\u003e28 (1.1)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Handling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eW peak\u003c\/p\u003e\n\u003cp\u003eW continuous\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e200\u003c\/p\u003e\n\u003cp\u003e100\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eΩ\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHz\u003c\/td\u003e\n\u003ctd\u003e200 - 28k\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCrossover cut-off\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLo\/Hi-pass\u003c\/td\u003e\n\u003ctd\u003e4.5 kHz - 6\/12 dB Oct\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCrossover adjustment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTweeter Level\u003c\/p\u003e\n\u003cp\u003eMid-Notch\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e+2 \/ 0 \/ -2 dB\u003c\/p\u003e\n\u003cp\u003e0 \/ -4 \/ -6 dB\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eWeight of one component\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMidrange\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003cp\u003eCrossover\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e0.210 (0.46)\u003c\/p\u003e\n\u003cp\u003e0.1 (0.22)\u003c\/p\u003e\n\u003cp\u003e0.57 (1.26)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Hertz_TechSheet_MLK-700_3_revD.pdf\" title=\"Hertz Hertz Mille Legend MLK 700.3 - Tech Sheet\" target=\"_blank\"\u003eHertz Hertz Mille Legend MLK 700.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Esec_Owners-manual-Speaker-mille_revE_x-Web-8.pdf\" title=\"Hertz Hertz Mille Legend MLK 700.3 - User Manual\" target=\"_blank\"\u003e\u003cspan\u003eHertz \u003c\/span\u003e\u003cspan\u003eHertz Mille Legend MLK 700.3 - User Manual\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31568185786402,"sku":"EH01-MLK700","price":699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-legend-mlk-700-3-speaker-system.jpg?v=1649935263"},{"product_id":"hertz-mille-legend-ml-1800-3-7-inch-woofer","title":"Hertz Mille Legend ML 1800.3 - 7 Inch Woofers","description":"\u003cp\u003eThe Hertz Mille Legend ML 1800.3 woofers have been researched and designed for the enthusiasts attending contests who need a component merging the timbre accuracy of the \u003ca href=\"hertz-mille-legend-ml-1650-3-car-audio-woofer\" title=\"Hertz Mille Legend ML 1650 Woofer\"\u003eHertz Mille Legend ML 1650.3\u003c\/a\u003e to a wider extension of the low frequencies thanks to the large emission surface, higher power handling and control which only a 50 mm voice coil can ensure.\u003c\/p\u003e\n\u003cp\u003eTo get to these results, the Hertz R\u0026amp;D staff performed extensive in-car voicing sessions, after building several prototypes with the FEA simulation method and testing them with a wide array of measurements carried out with the Klippel® suite.\u003c\/p\u003e\n\u003cp\u003eLike in the suspensions of competition cars, the surround must stand the most extreme working conditions to ensure maximum stability and symmetry at high excursions, and so to achieve impact and extension to the low frequency range.\u003c\/p\u003e\n\u003cp\u003eFor this reason, the electro-acoustic designers developed a new surround-basket gluing system called “Boundary Free Surround”. This technology, provides the ability to achieve wider emission surface of the cone compared to speakers with same diameter; that way, the cone manages to move a bigger mass of air, so it produces more acoustic pressure.\u003c\/p\u003e\n\u003ch2\u003eHertz Mille Legend ML 1800.3 - Product Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNeodymium magnet optimized with FEA simulations for real dynamics and utmost control.\u003c\/li\u003e\n\u003cli\u003eVery low carbon content CNC machined plates, for maximum magnetic permeability and low distortion at high power levels.\u003c\/li\u003e\n\u003cli\u003eAluminium covered pole for a linear impedance modulation and low distortion.\u003c\/li\u003e\n\u003cli\u003e50 mm CCAW double layer voice coil wound on a Polyamide former for exceptional power handling and compression-free re production even in the most demanding musical passages.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® with optimized geometry for utmost linearity and dispersion.\u003c\/li\u003e\n\u003cli\u003e“Boundary Free” IIR rubber surround, for better efficiency and wider mid-bass frequency.\u003c\/li\u003e\n\u003cli\u003ePressed-pulp cone with cotton fibres, combining stiffness and lightweight, to achieve wide frequency response and limited break-ups at high frequency.\u003c\/li\u003e\n\u003cli\u003eThree-spoke, very acoustically transparent anti-resonant aluminium alloy basket featuring built-in venting holes.\u003c\/li\u003e\n\u003cli\u003eCNC machined elegant diamond-cut basket edge featuring the Hertz logo.\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium factory provided grille featuring diamond-cut aluminium Hertz logo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnologies\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-CONE®\u003c\/strong\u003e - The exponential profile gets very close to the perfect one, providing exceptional dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBOUNDARY FREE SURROUND\u003c\/strong\u003e - This technology provides the ability to achieve wider emission surface of the cone compared to speakers with same diameter; that way, the cone manages to move a bigger mass of air, so it produces more acoustic pressure. This special surround is built from highly pure IIR butyl rubber, ensuring extraordinary thermal and mechanical linearity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer size:\u003c\/strong\u003e 180mm (7 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice Coil Ø:\u003c\/strong\u003e 50mm (2 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e 400W Peak \/ 200W Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 38Hz - 6kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet size:\u003c\/strong\u003e 90mm x 60.7mm x 5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentre to centre distance:\u003c\/strong\u003e 173mm (6.81 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole diameter \/ Eyelet Dimensions:\u003c\/strong\u003e 5mm (0.2 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one speaker:\u003c\/strong\u003e 1.71kg (3.77 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet:\u003c\/strong\u003e Neodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDome\/Cone:\u003c\/strong\u003e Pressed-pulp cone with cotton fibres\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXmech:\u003c\/strong\u003e ±10mm (0.4 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille_Legend_ML1800_Tech_Sheet_2016_A.pdf\" title=\"Hertz Mille Legend ML 1800.3 Woofer - Tech Sheet\" target=\"_blank\"\u003eHertz Mille Legend ML 1800.3 Woofer - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Esec_Owners-manual-Speaker-mille_revE_x-Web-5.pdf\" title=\"Hertz Mille Legend ML 1800.3 Woofer - User Manual\" target=\"_blank\"\u003e\u003cspan\u003eHertz Mille Legend ML 1800.3 Woofer - User Manual\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31567765078050,"sku":"EH01-ML1800","price":579.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-legend-ml-1800-3-woofers.jpg?v=1649933492"},{"product_id":"hertz-mille-legend-ml-1650-3-car-audio-woofer","title":"Hertz Mille Legend ML 1650.3 - 6.5 Inch Woofers","description":"\u003cp\u003eThe Hertz Mille Legend ML 1650.3 Woofer has increased again the limits of achievable performance for components designed for door installation. To get to these results, the Hertz R\u0026amp;D staff performed extensive in-car voicing sessions, after building several prototypes with the FEA simulation method and testing them with a wide array of measurements carried out with the Klippel® suite.\u003c\/p\u003e\n\u003cp\u003eTo ensure extraordinary power handling and very high thermal stability even with tracks especially rich in bass frequencies, the Hertz ML 1650.3 Legend features a 36 mm mobile voice coil. This size ensures the best compromise between power handling and high frequency response.\u003c\/p\u003e\n\u003cp\u003eThe cone geometry has been subject of in-depth studies with FEA simulations and measurements performed with the Klippel Scan Vibrometer; all that led to the optimization of the V-cone® profile. In the subwoofers and in the woofers, to reproduce the lowest frequency spectrum, the cone needs to move a remarkable amount of air, so it is forced to make long excursions moving like a piston does.\u003c\/p\u003e\n\u003cp\u003eThe V-cone® profile prevents the cone from deforming during its course, ensuring that the “piston” works in a correct position, maximizing the production of acoustic pressure.\u003c\/p\u003e\n\u003ch2\u003eHertz Mille Legend ML 1650.3 - Product Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNeodymium magnet optimized with FEA simulations for real dynamics and utmost control.\u003c\/li\u003e\n\u003cli\u003eVery low carbon content CNC machined plates, for maximum magnetic permeability and low distortion at high power levels.\u003c\/li\u003e\n\u003cli\u003eAluminium covered pole for a linear impedance modulation and low distortion.\u003c\/li\u003e\n\u003cli\u003e36 mm CCAW double layer voice coil wound on a Polyamide former for exceptional power handling and compression-free re production even in the most demanding musical passages.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® with optimized geometry for utmost linearity and dispersion at mid frequency range.\u003c\/li\u003e\n\u003cli\u003e“Boundary Free” IIR rubber surround, for better efficiency and wider mid-bass frequency.\u003c\/li\u003e\n\u003cli\u003ePressed-pulp cone with cotton fibres, combining stiffness and lightweight, to achieve wide frequency response and limited break-ups at high frequency.\u003c\/li\u003e\n\u003cli\u003eThree-spoke, very acoustically transparent anti-resonant aluminium alloy basket featuring built-in venting holes.\u003c\/li\u003e\n\u003cli\u003eCNC machined elegant diamond-cut basket edge featuring the Hertz logo.\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium factory provided grille featuring diamond-cut aluminium Hertz logo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnologies\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-CONE®\u003c\/strong\u003e - The exponential profile gets very close to the perfect one, providing exceptional dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBOUNDARY FREE SURROUND\u003c\/strong\u003e - This technology provides the ability to achieve wider emission surface of the cone compared to speakers with same diameter; that way, the cone manages to move a bigger mass of air, so it produces more acoustic pressure. This special surround is built from highly pure IIR butyl rubber, ensuring extraordinary thermal and mechanical linearity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer size:\u003c\/strong\u003e 165mm (6.5 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice Coil Ø:\u003c\/strong\u003e 36mm (1.4 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e 250W - Peak \/ 125W Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 40Hz ÷ 6.5kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet size:\u003c\/strong\u003e 80mm x 45mm x 5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentre to centre distance:\u003c\/strong\u003e 156mm (6.14 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole diameter \/ Eyelet Dimensions:\u003c\/strong\u003e 5mm (0.2 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one speaker:\u003c\/strong\u003e 1.29kg (2.84 ib)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet:\u003c\/strong\u003e Neodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDome\/Cone:\u003c\/strong\u003e Pressed-pulp cone with cotton fibres\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-Legend_ML1650_Tech_Sheet_16_A.pdf\" title=\"Hertz Mille Legend ML 1650. 3 - Woofer - Tech Sheet\" target=\"_blank\"\u003eHertz Mille Legend ML 1650. 3 - Woofer - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Esec_Owners-manual-Speaker-mille_revE_x-Web-4.pdf\" title=\"Hertz Mille Legend ML 1650. 3 - Woofer - User Manual\" target=\"_blank\"\u003e\u003cspan\u003eHertz Mille Legend ML 1650. 3 - Woofer - User Manual\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31567646687266,"sku":"EH01-ML1650","price":429.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-legend-ml-1650-3-woofers.jpg?v=1649931851"},{"product_id":"hertz-mille-legend-ml-700-3-midrange-speaker","title":"Hertz Mille Legend ML 700.3 - Midrange Speakers","description":"\u003cp\u003eThe Hertz Mille Legend ML 700.3 Midrange Speakers features the V-cone geometry upgrade, the Neodymium magnet assembly and the 3-spoke anti-resonant aluminium alloy basket with vented holes.\u003c\/p\u003e\n\u003cp\u003eThanks to these technologies, as well as the Boundary Free Surround, taking the diameter emission from 60 to 65 mm, the midrange will provide extended, properly damped low frequency response, as the component will be filtered especially at the low frequencies, for excellent combination with the \u003ca href=\"hertz-mille-legend-ml-1800-3-7-inch-woofer\" title=\"Hertz Mille Legend ML 1800.3\"\u003eHertz Mille Legend ML 1800.3\u003c\/a\u003e, to build an ultra-performing system for competitions.\u003c\/p\u003e\n\u003ch2\u003eHertz Mille Legend ML 700.3 - Product Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNeodymium magnet optimized with FEA simulations, for superior dynamics and control.\u003c\/li\u003e\n\u003cli\u003eVery low carbon content CNC machined plates, for maximum magnetic permeability and low distortion at high power levels.\u003c\/li\u003e\n\u003cli\u003eExtremely pure copper covered central pole and one-layer mobile coil, for a wider extension in the high frequency range.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExponential V-cone® with optimized geometry for utmost linearity and dispersion.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eCONEX spider with optimized profile, for maximum transparent acoustics at mid-high frequency.\u003c\/li\u003e\n\u003cli\u003e“Boundary Free” IIR rubber surround, for better efficiency and wider mid-bass frequency.\u003c\/li\u003e\n\u003cli\u003ePressed-pulp cone with cotton fibres, combining stiffness and lightweight, to achieve wide frequency response and limited break-ups at high frequency.\u003c\/li\u003e\n\u003cli\u003eJunction point between cone and former with geometry optimized with FEA methods, allowing a more integral coupling, thus ensuring wider extension at high frequency.\u003c\/li\u003e\n\u003cli\u003eThree-spoke, very acoustically transparent anti-resonant aluminium alloy basket featuring built-in venting holes.\u003c\/li\u003e\n\u003cli\u003eCNC machined elegant diamond-cut basket edge featuring the Hertz logo.\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium factory provided grille featuring diamond-cut aluminium Hertz logo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMidrange size:\u003c\/strong\u003e 70mm (3 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice Coil Ø:\u003c\/strong\u003e 20mm (0.8 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e 100 W Peak (Hi-Pass filtered @ 250Hz - 12dB Oct.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 200Hz - 20kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet size:\u003c\/strong\u003e 45mm x 25mm x 3.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentre to centre distance:\u003c\/strong\u003e 80mm (3.15 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole diameter \/ Eyelet Dimensions:\u003c\/strong\u003e 3.7mm (0.14 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one speaker:\u003c\/strong\u003e 0.21 kg (0.46 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet:\u003c\/strong\u003e Neodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDome\/Cone:\u003c\/strong\u003e Pressed-pulp cone with cotton fibres\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca title=\"Hertz Mille Legend ML700.3 - Midrange Speaker - Tech Sheet\" href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-Legend_ML700_Tech_Sheet_16_A.pdf\" target=\"_blank\"\u003eHertz Mille Legend ML700.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Hertz Mille Legend ML700.3 - Midrange Speaker - User Manual\" href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Esec_Owners-manual-Speaker-mille_revE_x-Web-3.pdf\" target=\"_blank\"\u003e\u003cspan\u003eHertz Mille Legend ML700.3 - User Manual\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31567575253026,"sku":"EH01-ML700","price":289.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-legend-ml-700-3-midrange-speakers.jpg?v=1649934099"},{"product_id":"hertz-mille-legend-ml-280-3-tweeter-set","title":"Hertz Mille Legend ML 280.3 - Tweeters","description":"\u003cp\u003eTo improve car audio tweeters which were considered a reference since their first introduction into the market is a quite challenging task which could only be achieved by a continued evolution in time and maximum care for each detail that might affect sound.\u003c\/p\u003e\n\u003cp\u003eFrom these presuppositions the Hertz ML 280.3 Legend Tweeters were born. Through the FEA simulations, the electro-acoustic designers carried out an extensive research which led to the optimization of the Tetolon dome geometry, to minimize distortion.\u003c\/p\u003e\n\u003cp\u003eThis optimisation method led to a reviewed face plate geometry for improved frequency response and lower distortion.\u003c\/p\u003e\n\u003cp\u003eAnother element of the tweeter, especially important for sound, is the rear acoustic chamber: the designers performed exhaustive research on the geometry as well as on the employed damping material, achieving 50% increase in overall volume, to extend response to lower frequencies with 900Hz resonance frequency.\u003c\/p\u003e\n\u003ch2\u003eHertz Mille Legend ML 280.3 - Product Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNeodymium magnet optimized with FEA simulations of the magnetic flux for utmost control and fast response to the transients.\u003c\/li\u003e\n\u003cli\u003eExtremely pure copper short circuit ring, for excellent very high frequency extension.\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium face platewith profile optimized with FEA simulations to improve frequency response and dispersion.\u003c\/li\u003e\n\u003cli\u003eTetolon Fiber domeoptimized with FEA simulations for lower distortion and improved dispersion in high frequency range.\u003c\/li\u003e\n\u003cli\u003eFrame structure and rear load chamber both derived from aCNC machined solid aluminium block, to ensure mechanically inert response to resonances.\u003c\/li\u003e\n\u003cli\u003eRear chamber sized for only900 Hz Fs: low Fs ensures wide extension in low frequency range and low distortion also in the crossing section, allowing a decreased cut-off frequency.\u003c\/li\u003e\n\u003cli\u003eHigh-density damping materialunderneath the dome, low-density absorbing material in the rear chamber, providing fluid acoustic emission and high damping in the low frequency response.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter diaphragm:\u003c\/strong\u003e 35mm (1.38 in)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice Coil Ø:\u003c\/strong\u003e 28mm (1.1 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e 180W - Peak (Hi-Pass filtered @ 1,8kHz - 12dB Oct.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 1kHz ÷ 28kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet size:\u003c\/strong\u003e 27.8mm x 3.5mm x 3mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one speaker:\u003c\/strong\u003e 0.10kg (0.22 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet:\u003c\/strong\u003e Neodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDome\/Cone:\u003c\/strong\u003e Tetolon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-Legend_ML280_Tech_Sheet_16_A.pdf\" title=\"Hertz Mille Legend ML 280.3 Tweeters  - Tech Sheet\" target=\"_blank\"\u003eHertz Mille Legend ML 280.3 Tweeters  - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Esec_Owners-manual-Speaker-mille_revE_x-Web-2.pdf\" title=\"Hertz Mille Legend ML 280.3 Tweeters - User Manual\" target=\"_blank\"\u003eHertz Mille Legend ML 280.3 Tweeters - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31567491334178,"sku":"EH01-ML280","price":269.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-legend-ml-280-3-tweeters.jpg?v=1649933957"},{"product_id":"hertz-mille-legend-mlcx-2-tw-3-crossover","title":"Hertz Mille Legend MLCX 2 TW.3 - Crossover","description":"\u003cp\u003eThe Hertz Mille Legend MLCX 2 TW.3 crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or any two separate channels, to the crossover, so making it possible to drive the woofers and tweeters separately.\u003c\/p\u003e\n\u003cp\u003eThe significant power increase with this configuration highlights all the features of the \u003ca href=\"hertz-mille-legend-mlk-1650-3-car-audio-speaker-system\" title=\"Hertz Mille Legend MLK 1650.3 system\"\u003eMLK 1650.3 Legend system\u003c\/a\u003e, with all the advantages coming from the multi-amplification.\u003c\/p\u003e\n\u003cp\u003eBesides, thanks to the Mid-Contour and Hi-Contour controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the crossover-point can be varied.\u003c\/p\u003e\n\u003cp\u003eThrough each of these two Contour controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve their favourite sound.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBi-amplification available, selectable through appropriate hi-current rating switch with hi-current carrying capability.\u003c\/li\u003e\n\u003cli\u003eMid-Contour two-position control, for a linear mid-bass frequency response according to the woofers position in the car and the listener s favourite sound.\u003c\/li\u003e\n\u003cli\u003eHi-Contour two-position control, to select the tweeter hi-pass crossover point selection according to the tweeter position\/angle towards the listener.\u003c\/li\u003e\n\u003cli\u003eMid-Contour in conjunction with Hi-Contour provides the ability to use MLCX 2 TW.3 to build a two way system based on ML 1650.3 or ML 1800.3 woofer together with ML 280.3 tweeter.\u003c\/li\u003e\n\u003cli\u003eThree-position switch for tweeter level adjustments in 2 dB steps, to fine-tune the transducer's emission.\u003c\/li\u003e\n\u003cli\u003eHi-Boost control, selectable through appropriate switch, to provide better linearity of the tweeter emission above 10kHz when positioned not on axis to with the listener.\u003c\/li\u003e\n\u003cli\u003eExtremely high quality bi-metallized 160V polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid\/hi-frequencies.\u003c\/li\u003e\n\u003cli\u003eAir wound inductors built on pure copper-wire with up to 1mm diameter, for high saturation threshold of the magnetic flux and low losses on the woofer section where high transient currents are demanded.\u003c\/li\u003e\n\u003cli\u003eHigh power rating Wirewound resistors, to ensure performance stability even at high operating temperature. The Wirewound build construction grants low parasitic series inductance thus reducing losses at high frequencies, especially for resistors in series to the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eComponent\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e2-Way Passive Crossover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Handling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePeak\u003c\/p\u003e\n\u003cp\u003eContinuous\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e300 W\u003c\/p\u003e\n\u003cp\u003e150 W\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCrossover\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003cp\u003eCut-off\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eLo-pass 6 dB Oct\u003c\/p\u003e\n\u003cp\u003eHi-pass 12 dB Oct\u003c\/p\u003e\n\u003cp\u003e2.5 kHz (Mid\/Hi-Cont. = ON)\u003c\/p\u003e\n\u003cp\u003e3.5 kHz (Mid\/Hi-Cont. = OFF)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAdjustment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003cp\u003eHi-Boost\u003c\/p\u003e\n\u003cp\u003eHi-Contour\u003c\/p\u003e\n\u003cp\u003eMid-Contour\u003c\/p\u003e\n\u003cp\u003eBi-Amp\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e+2 \/ 0 \/ -2 dB\u003c\/p\u003e\n\u003cp\u003eON \/ OFF\u003c\/p\u003e\n\u003cp\u003eON \/ OFF\u003c\/p\u003e\n\u003cp\u003eON \/ OFF\u003c\/p\u003e\n\u003cp\u003eON \/ OFF\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003emm\u003c\/p\u003e\n\u003cp\u003e(in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e195 x 119 x 41\u003c\/p\u003e\n\u003cp\u003e(7.67 x 4.68 x 1.61)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ekg (lb)\u003c\/td\u003e\n\u003ctd\u003e0.57 (1.26)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-Legend_MLCX2TW_Tech_Sheet_2016_A.pdf\" title=\"Hertz Mille Legend MLCX 2 TW.3 - Crossover - Tech Sheet\" target=\"_blank\"\u003eHertz Mille Legend MLCX 2 TW.3 - Crossover - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Hertz_Mille-Legend-Speaker_Manual4.pdf\" title=\"Hertz Mille Legend MLCX 2 TW.3 - Crossover - User Manual\" target=\"_blank\"\u003eHertz Mille Legend MLCX 2 TW.3 - Crossover - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":29622781476898,"sku":"8018823113960","price":229.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-legend-mlcx2-tw3-crossover.jpg?v=1652286188"},{"product_id":"hertz-mille-legend-ml-2000-3-subwoofer","title":"Hertz Mille Legend ML 2000.3 - Subwoofer - 200mm","description":"\u003cp\u003eMusic fans who attend live concerts know very well the emotions that low undistorted frequencies without dynamic compression can arouse. For this reason, the Hertz R\u0026amp;D created the Hertz Mille Legend ML 2000.3 car audio subwoofer. During the long development phase, the designers set themselves just one ambitious goal: to transfer the emotions of a live performance to the car environment.\u003c\/p\u003e\n\u003cp\u003eThanks to a completely renewed design, the Mille Legend ML2000.3 car audio subwoofers have extremely compact size and are optimized to play in enclosures with reduced boxes. This choice of design combines two requirements hard to achieve up to now: reference performance and ease of installation.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eExtraordinary large neodymium magnet, optimised with FEA simulations, to ensure magnetic field stability even under high excursion.\u003c\/li\u003e\n\u003cli\u003eVery low carbon content CNC machined plates, for maximum magnetic permeability and low distortion at high power levels.\u003c\/li\u003e\n\u003cli\u003eVoice coil internal magnet with high size \/ performance ratio, for maximum efficiency.\u003c\/li\u003e\n\u003cli\u003eCCAW, 100 mm (4”) voice coil, capable of handling 1400 W musical power, keeping the working temperature very low, reducing dynamic compression to the minimum.\u003c\/li\u003e\n\u003cli\u003eVoice coil wound with In\/Out method, for even cooling of the different coil layers.\u003c\/li\u003e\n\u003cli\u003eVoice coil wound on TIL former: this material made from fibreglass combines the heat dissipation properties of aluminium with the stiffness of Polyamide composites, for a no-compromise acoustic performance.\u003c\/li\u003e\n\u003cli\u003eCentral pole featuring “Aluminium Shorting Ring”, for minimum distortion and maximum extension at low frequency.\u003c\/li\u003e\n\u003cli\u003eBoundary Free” IIR rubber surround, for higher SPL performance with same external diameter.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® with optimized geometry for high cone stiffness and strong resistance to deformation even at maximum excursions.\u003c\/li\u003e\n\u003cli\u003ePressed-pulp cone with mineral powders, for superior rigidity and damping.\u003c\/li\u003e\n\u003cli\u003eVery acoustically transparent anti-resonant aluminium alloy basket featuring six-spoke self-standing structure and built-in venting holes underneath the spider.\u003c\/li\u003e\n\u003cli\u003eCNC machined elegant diamond-cut basket edge featuring the Hertz logo.\u003c\/li\u003e\n\u003cli\u003eErgonomic, ultra-compact design, with array of electro-acoustic parameters optimized for sealed box application with 10 - 17 lt volume.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubwoofer size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e200mm (8 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice Coil Ø:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e100mm (4 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1400W Peak \/ 700W Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e\u003cspan\u003e 30\u003c\/span\u003eHz - 600Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e95mm x 28mm x 5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentre to centre distance:\u003c\/strong\u003e\u003cspan\u003e 199\u003c\/span\u003emm (7.83 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole diameter \/ Eyelet Dimensions:\u003c\/strong\u003e\u003cspan\u003e 5\u003c\/span\u003e.5mm (0.22 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one speaker:\u003c\/strong\u003e\u003cspan\u003e 6\u003c\/span\u003e.12Kg (13.5 ib)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNeodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDome\/Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePressed-pulp cone with mineral powders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXmech:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e±23mm (0.9 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca title=\"Hertz Mille Legend ML 2000.3 - Subwoofer - Tech Sheet\" href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-Legend_2000_Tech_Sheet_2016_A.pdf\" target=\"_blank\"\u003eHertz Mille Legend ML 2000.3 - Subwoofer - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Hertz Mille Legend ML 2000.3 - Subwoofer - User Manual\" href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Esec_Owners-manual-Speaker-mille_revE_x-Web.pdf\" target=\"_blank\"\u003eHertz Mille Legend ML 2000.3 - Subwoofer - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Subwoofer Only","offer_id":31570591645730,"sku":"EH01-ML2000","price":579.0,"currency_code":"GBP","in_stock":true},{"title":"with MLG Grille","offer_id":31570591678498,"sku":"EH01-ML2000-MLG","price":639.0,"currency_code":"GBP","in_stock":true},{"title":"with MG Grille","offer_id":31570591711266,"sku":"EH01-ML2000-MG","price":649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-legend-ml-2000-3-subwoofer-4.jpg?v=1652284247"},{"product_id":"hertz-mille-mg-200-3-speaker-grille","title":"Hertz Mille MG 200.3 - Speaker Grille","description":"\u003cp\u003eDesigned for the \u003ca href=\"\/products\/hertz-mille-legend-ml-2000-3-subwoofer\" title=\"Hertz Mille Legend ML 2000.3 Subwoofer\"\u003eHertz Mille Legend ML 2000.3 Subwoofer\u003c\/a\u003e, the MG 200.3 grille features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTailor-designed for Mille Legend\/Pro subwoofers, providing total protection.\u003c\/li\u003e\n\u003cli\u003eFull metal sturdy structure composed by a solid cast aluminium ring and a steel mesh black grille featuring an elegant diamond-cut Hertz Logo\u003c\/li\u003e\n\u003cli\u003eMounting screws totally hidden for a superior integration within the car cabin.\u003c\/li\u003e\n\u003cli\u003eM5 self-tapping hexagon socket screws with bit driver included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille_Grille_MG200_3_Tech_Sheet.pdf\" title=\"Hertz Mille MG 200.3 - Speaker Grille - Tech Sheet\" target=\"_blank\"\u003eHertz Mille MG 200.3 - Speaker Grille - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31570781929506,"sku":"8018823129138","price":39.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mg300-3-speaker-grille_af676771-4d17-4659-81ba-04cb84c226da.jpg?v=1652283262"},{"product_id":"hertz-mille-legend-mlg-2000-3-speaker-grille","title":"Hertz Mille Legend MLG 2000.3 - Speaker Grille","description":"\u003cp\u003eThe optional Hertz Mille Legend MLG 2000.3 subwoofer grille is made of die-cast aluminium, featuring diamond-cut aluminium Hertz logo.\u003c\/p\u003e\n\u003cp\u003eDesigned to match the \u003ca href=\"\/products\/hertz-mille-legend-ml-2000-3-subwoofer\" title=\"Hertz Mille Legend ML 2000.3 Subwoofer\"\u003eHertz Mille Legend ML 2000.3 Subwoofer\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e - 200mm \/ 8 Inches\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31570632146978,"sku":"EH01-MLG2000","price":69.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-legend-ml-2000-grille_729eb10f-8be9-4f24-8290-cd1ceb2535e6.jpg?v=1652286723"},{"product_id":"hertz-mille-legend-ml-2500-3-subwoofer","title":"Hertz Mille Legend ML 2500.3 - Subwoofer - 250mm","description":"\u003cp\u003eMusic fans who attend live concerts know full well the emotions that low undistorted frequencies without dynamic compression can arouse. For this reason, the Hertz R\u0026amp;D created the Hertz Mille Legend ML 2500.3 car audio subwoofer.\u003c\/p\u003e\n\u003cp\u003eDuring the long development phase, the designers set themselves just one ambitious goal: to transfer the emotions of a live performance to the car environment. Thanks to a completely renewed design, the Mille Legend ML2500.3 car audio subwoofers have extremely compact size and are optimized to play in enclosures with reduced boxes.\u003c\/p\u003e\n\u003cp\u003eThis choice of design combines two requirements hard to achieve up to now: reference performance and ease of installation.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eExtraordinary large neodymium magnet, optimized with FEA simulations, to ensure magnetic field stability even under high excursion.\u003c\/li\u003e\n\u003cli\u003eVery low carbon content CNC machined plates, for maximum magnetic permeability and low distortion at high power levels.\u003c\/li\u003e\n\u003cli\u003eVoice coil internal magnet with high size \/ performance ratio, for maximum efficiency.\u003c\/li\u003e\n\u003cli\u003eCCAW, 100 mm (4”) voice coil, capable of handling 1400 W musical power, keeping the working temperature very low, reducing dynamic compression to the minimum.\u003c\/li\u003e\n\u003cli\u003eVoice coil wound with In\/Out method, for even cooling of the different coil layers.\u003c\/li\u003e\n\u003cli\u003eVoice coil wound on TIL former: this material made from fibreglass combines the heat dissipation properties of aluminium with the stiffness of Polyamide composites, for a no-compromise acoustic performance.\u003c\/li\u003e\n\u003cli\u003eCentral pole featuring “Aluminium Shorting Ring”, for minimum distortion and maximum extension at low frequency.\u003c\/li\u003e\n\u003cli\u003eBoundary Free” IIR rubber surround, for higher SPL performance with same external diameter.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® with optimized geometry for high cone stiffness and strong resistance to deformation even at maximum excursions.\u003c\/li\u003e\n\u003cli\u003eMineral-injected paper cone, for superior rigidity and damping.\u003c\/li\u003e\n\u003cli\u003eVery acoustically transparent anti-resonant aluminium alloy basket featuring six-spoke self-standing structure and built-in venting holes underneath the spider.\u003c\/li\u003e\n\u003cli\u003eCNC machined elegant diamond-cut basket edge featuring the Hertz logo.\u003c\/li\u003e\n\u003cli\u003eErgonomic, ultra-compact design, with array of electro-acoustic parameters optimized for sealed box application with 17 - 25 lt volume\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubwoofer size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e250mm (10 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice Coil Ø:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e100mm (4 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1400W Peak \/ 700W Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e27Hz - 500Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e95mm x 28mm x 6mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentre to centre distance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e251mm (9.88 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole diameter \/ Eyelet Dimensions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e6.4mm (0.25 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one speaker:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e7.5Kg (16.53 ib)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNeodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDome\/Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePressed-pulp cone with mineral powders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXmech:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e±27mm (1.06 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-Legend_2500_Tech_Sheet_2016_A.pdf\" title=\"Hertz Mille Legend ML 2500.3 - Subwoofer - Tech Sheet\" target=\"_blank\"\u003eHertz Mille Legend ML 2500.3 - Subwoofer - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Esec_Owners-manual-Speaker-mille_revE_x-Web-1.pdf\" title=\"Hertz Mille Legend ML 2500.3 - Subwoofer - User Manual\" target=\"_blank\"\u003eHertz Mille Legend ML 2500.3 - Subwoofer - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Subwoofer Only","offer_id":31570599018530,"sku":"EH01-ML2500","price":749.0,"currency_code":"GBP","in_stock":true},{"title":"with MLG Grille","offer_id":31570599051298,"sku":"EH01-ML2500-MLG","price":819.0,"currency_code":"GBP","in_stock":true},{"title":"with MG Grille","offer_id":31570599084066,"sku":"EH01-ML2500-MG","price":829.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-legend-ml-2500-3-subwoofer.jpg?v=1652287301"},{"product_id":"hertz-mille-legend-mlg-2500-3-speaker-grille","title":"Hertz Mille Legend MLG 2500.3 - Speaker Grille","description":"\u003cp\u003eThe optional Hertz Mille Legend MLG 2500.3 subwoofer grille is made of die-cast aluminium, featuring diamond-cut aluminium Hertz logo.\u003c\/p\u003e\n\u003cp\u003eDesigned to match the \u003ca href=\"\/products\/hertz-mille-legend-ml-2500-3-subwoofer\" title=\"Hertz Mille Legend ML 2500.3 Subwoofer\"\u003eHertz Mille Legend ML 2500.3 Subwoofer\u003c\/a\u003e\u003ca href=\"hertz-mille-legend-ml-2500-3-subwoofer\" title=\"Hertz Mille Legend ML 2500.3 Subwoofer\"\u003e.\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e - 250mm \/ 10 Inches\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31570640502818,"sku":"8018823114554","price":79.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-legend-ml-2000-grille_1ed95a1e-f864-46bd-8c0d-bef284dff03b.jpg?v=1652284497"},{"product_id":"hertz-mille-mg-250-3-speaker-grille","title":"Hertz Mille MG 250.3 - Speaker Grille","description":"\u003cp\u003eDesigned for the \u003ca href=\"\/products\/hertz-mille-legend-ml-2500-3-subwoofer\" title=\"Hertz Mille Legend ML 2500.3 Subwoofer\"\u003eHertz Mille Legend ML 2500.3 Subwoofer\u003c\/a\u003e and Mille Pro MP 250 D2\/D4.3 Subwoofer, the MG 250.3 grille features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTailor-designed for Mille Legend\/Pro subwoofers, providing total protection.\u003c\/li\u003e\n\u003cli\u003eFull metal sturdy structure composed by a solid cast aluminium ring and a steel mesh black grille featuring an elegant diamond-cut Hertz Logo\u003c\/li\u003e\n\u003cli\u003eMounting screws totally hidden for a superior integration within the car cabin.\u003c\/li\u003e\n\u003cli\u003eM5 self-tapping hexagon socket screws with bit driver included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille_Grille_MG250_3_Tech_Sheet.pdf\" title=\"Hertz Mille MG 250.3 - Speaker Grille - Tech Sheet\" target=\"_blank\"\u003eHertz Mille MG 250.3 - Speaker Grille - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31570797002786,"sku":"EH01-MG250","price":49.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mg300-3-speaker-grille_23ccbaeb-3d13-4153-817c-9d732bad592d.jpg?v=1652284442"},{"product_id":"hertz-mille-pro-mpk-165-3-car-audio-speaker-system","title":"Hertz Mille Pro MPK 165.3 - Speaker System","description":"\u003cp\u003eThe Hertz Mille Pro MPK 165.3 car audio speaker system has been designed to ensure a wide low frequency response, even in cars with no space for a subwoofer. Thanks to the V-cone® and Boundary Free Surround technologies the \u003ca href=\"hertz-mille-pro-mp-165-3-woofer-set\" title=\"Hertz Mille Pro MP 165.3 Woofer\"\u003eMille Pro MP 165.3 woofer\u003c\/a\u003e boasts outstanding dispersion features and generates high SPL with compact dimensions.\u003c\/p\u003e\n\u003cp\u003eThe dedicated crossover MPCX 2.3 has been designed to exploit the wide extension of the Mille Pro MP 165.3 woofers, ensuring a natural transition towards the \u003ca href=\"hertz-mille-pro-mp-25-3-car-audio-tweeter-set\" title=\"Hertz Mille Pro MP 25.3 Tweeter\"\u003eMP 25.3 tweeter\u003c\/a\u003e, for maximum natural acoustic emission. The 1mm low resistance copper filter coil of the woofer maximizes its efficiency.\u003c\/p\u003e\n\u003cp\u003eThe MPCX 2.3 crossover features tweeter level (0\/+2 dB) to calibrate the MP 25.3 acoustic emission level comparing it to the woofer one.\u003c\/p\u003e\n\u003ch2\u003eHertz Mille Pro MPK 165.3 - Product Features\u003c\/h2\u003e\n\u003ch3\u003eMP 25.3:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTetolon fiber soft dome, for a natural yet detailed reproduction of musical nuances.\u003c\/li\u003e\n\u003cli\u003e“Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion.\u003c\/li\u003e\n\u003cli\u003eHigh density flux Neodymium magnet, optimized for utmost control during high energy dynamic transients in the mid-high frequency range.\u003c\/li\u003e\n\u003cli\u003e25mm ferrofluid-cooled mobile voice coil.\u003c\/li\u003e\n\u003cli\u003eRear chamber filled with selected damping material and sized for lower Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.\u003c\/li\u003e\n\u003cli\u003eFaceplate featuring FEM (Finite Element Modeling) optimized geometry, for high linearity in off-axis installations.\u003c\/li\u003e\n\u003cli\u003eWide array of installation accessories, for an easy OEM integration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMP 165.3:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePure copper voice coil wound on a Polyamide former for high power handling combined with very low intermodulation distortion of vocals.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically optimized for utmost linearity and dispersion in the mid frequency range.\u003c\/li\u003e\n\u003cli\u003e“Boundary Free” rubber surround, for improved efficiency and wider mid-bass frequency.\u003c\/li\u003e\n\u003cli\u003eHigh density flux ferrite magnet combined with very low carbon content iron plates, for low distortion at high power levels.\u003c\/li\u003e\n\u003cli\u003eLow mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo.\u003c\/li\u003e\n\u003cli\u003eFull protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMPCX 2.3:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-position (0 \/ +2 dB) switch for tweeter level adjustments, to fine-tune the transducers emission.\u003c\/li\u003e\n\u003cli\u003e160V extremely high quality bi-metallized polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid\/hi-frequencies.\u003c\/li\u003e\n\u003cli\u003e1mm pure copper wire low series resistance inductors, for low dissipation losses on the woofer section where high transient currents are demanded.\u003c\/li\u003e\n\u003cli\u003eSmall footprint design for easy installation, with top vent grille for efficient heat dissipation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter diaphragm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e165 (6.5)\u003c\/p\u003e\n\u003cp\u003e29 (1.14)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eVoice Coil Ø\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e25 (1)\u003c\/p\u003e\n\u003cp\u003e25 (1)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Handling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eW peak\u003c\/p\u003e\n\u003cp\u003eW continuous\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e220\u003c\/p\u003e\n\u003cp\u003e110\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensitivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003edB SPL\u003c\/td\u003e\n\u003ctd\u003e92\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eΩ\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHz\u003c\/td\u003e\n\u003ctd\u003e40 - 22.5k\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCrossover\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMidrange\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eLow pass 3,5 kHz @ -6 dB Oct.\u003c\/p\u003e\n\u003cp\u003eHi pass 3,5k Hz @ -12 dB Oct.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAdjustment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTweeter Level\u003c\/td\u003e\n\u003ctd\u003e0 \/ +2 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eWeight of one component\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003cp\u003eCrossover\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e1.07 (2.36)\u003c\/p\u003e\n\u003cp\u003e0.07 (0.15)\u003c\/p\u003e\n\u003cp\u003e0.16 (0.35)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-PRO_MPK165_Tech_Sheet.pdf\" title=\"Hertz Mille Pro MPK 165.3 - Car Audio Speaker System - Tech Sheet\" target=\"_blank\"\u003eHertz Mille Pro MPK 165.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Mille_PRO_Owners_Manual_revE9.pdf\" title=\"Hertz Mille Pro Speakers - User Manual\" target=\"_blank\"\u003eHertz Mille Pro Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31573618032674,"sku":"EH02-MPK165","price":319.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-pro-mpk165-speaker-system.jpg?v=1649941913"},{"product_id":"hertz-mille-pro-mpk-165p-3-car-audio-speaker-system","title":"Hertz Mille Pro MPK 165P.3 - Speaker System","description":"\u003cp\u003eThe Hertz Mille Pro MPK 165P.3 car audio speaker systems energy in the mid-low range ensures a unique listening experience, creating the ideal set up alongside a powerful subwoofer section.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"hertz-mille-pro-mp-165p-3-car-audio-woofer-set\" title=\"Hertz Mille Pro MP 165P.3 Woofer\"\u003eMille Pro MP 165P.3 woofer\u003c\/a\u003e's electroacoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The MPK 165P.3 woofer's timbre balance is entrusted to the MPCX 2P.3 crossover featuring a copper inductor with a 1 mm diameter wire to filter the MP 165P.3, which, with its nominal 3 Ω requires high impulse currents.\u003c\/p\u003e\n\u003cp\u003eThe tweeter \u003ca href=\"hertz-mille-pro-mp-25-3-car-audio-tweeter-set\" title=\"Hertz Mille Pro MP 25.3 Tweeters\"\u003eMP 25.3\u003c\/a\u003e 12dB\/Octave crossover is built with extremely high quality 160V bi-metallized polyester film capacitor and an air coil inductor. The tweeter (MP 25.3) level control (0\/+2.5dB) provides the ability to adapt the system response to the listener preferences and considering the components installation position.\u003c\/p\u003e\n\u003ch2\u003eHertz Mille Pro MPK 165P.3 - Product Features\u003c\/h2\u003e\n\u003ch3\u003eMP 25.3:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTetolon fiber soft dome, for a natural yet detailed reproduction of musical nuances.\u003c\/li\u003e\n\u003cli\u003e“Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion.\u003c\/li\u003e\n\u003cli\u003eHigh density flux Neodymium magnet, optimized for utmost control during high energy dynamic transients in the mid-high frequency range.\u003c\/li\u003e\n\u003cli\u003e25mm ferrofluid-cooled mobile voice coil.\u003c\/li\u003e\n\u003cli\u003eRear chamber filled with selected damping material and sized for lower Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.\u003c\/li\u003e\n\u003cli\u003eFaceplate featuring FEM (Finite Element Modeling) optimized geometry, for high linearity in off-axis installations.\u003c\/li\u003e\n\u003cli\u003eWide array of installation accessories, for an easy OEM integration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMP 165P.3:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 ohm nominal impedance to exploit all the amplifier’s power.\u003c\/li\u003e\n\u003cli\u003e14 mm height pure copper voice coil wound on a Polyamide former, for exceptional power handling.\u003c\/li\u003e\n\u003cli\u003e95 mm diameter magnet to maximize the control over the whole excursion.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically optimized for utmost linearity and dispersion in the mid frequency range.\u003c\/li\u003e\n\u003cli\u003e“Boundary Free” rubber surround, for improved efficiency and wider mid-bass frequency.\u003c\/li\u003e\n\u003cli\u003eLow mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo.\u003c\/li\u003e\n\u003cli\u003eFull protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMPCX 2P.3:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-position (0 \/ +2.5 dB) switch for tweeter level adjustments, to fine-tune the transducers emission.\u003c\/li\u003e\n\u003cli\u003e160V extremely high quality bi-metallized polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid\/hi-frequencies.\u003c\/li\u003e\n\u003cli\u003e1mm pure copper wire low series resistance inductors, for low dissipation losses on the woofer section where high transient currents are demanded.\u003c\/li\u003e\n\u003cli\u003eSmall footprint design for easy installation, with top vent grille for efficient heat dissipation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter diaphragm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e165 (6.5)\u003c\/p\u003e\n\u003cp\u003e29 (1.14)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eVoice Coil Ø\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e25 (1)\u003c\/p\u003e\n\u003cp\u003e25 (1)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Handling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eW peak\u003c\/p\u003e\n\u003cp\u003eW continuous\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e230\u003c\/p\u003e\n\u003cp\u003e115\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensitivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003edB SPL\u003c\/td\u003e\n\u003ctd\u003e93\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eΩ\u003c\/td\u003e\n\u003ctd\u003e3\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHz\u003c\/td\u003e\n\u003ctd\u003e45 - 22.5k\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCrossover\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMidrange\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eLo-pass 4 kHz @ -6 dB Oct.\u003c\/p\u003e\n\u003cp\u003eHi-pass 4 kHz @ -12 dB Oct\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAdjustment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTweeter Level\u003c\/td\u003e\n\u003ctd\u003e 0 \/ +2.5 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eWeight of one component\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003cp\u003eCrossover\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e1.20 (2.65)\u003c\/p\u003e\n\u003cp\u003e0.07 (0.15)\u003c\/p\u003e\n\u003cp\u003e0.17 (0.37)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-PRO_MPK165P_Tech_Sheet.pdf\" title=\"Hertz Mille Pro MPK 165P.3 - Car Audio Speaker System - Tech Sheet\" target=\"_blank\"\u003eHertz Mille Pro MPK 165P.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Mille_PRO_Owners_Manual_revE10.pdf\" title=\"Hertz Mille Pro Speakers - User Manual\" target=\"_blank\"\u003eHertz Mille Pro Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31573645885474,"sku":"EH02-MPK165P","price":349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-pro-mpk165p-speaker-system.jpg?v=1649943199"},{"product_id":"hertz-mille-pro-mpk-1650-3-car-audio-speaker-system","title":"Hertz Mille Pro MPK 1650.3 - Speaker System","description":"\u003cp\u003eThe Hertz Mille Pro MPK 1650.3 car audio speakers system is the top of the range two way system of the Mille PRO line. The system uses the 28 mm diameter MP 28.3 tweeter inheriting all the technological features of the Mille Legend ML28.3. The geometry of the Tetolon dome maximizes the typical dispersion of off-axis listening.\u003c\/p\u003e\n\u003cp\u003eThe rear acoustic chamber with damping material contributes to extend response to lower frequencies achieving a resonance frequency of only 900 Hz. In this way the crossover point between tweeter and woofer can be lowered, improving the sound image in the car dashboard. The massive Neodymium motor minimizes nonlinearity managing the music program with very dynamic transients.\u003c\/p\u003e\n\u003cp\u003eThe CCAW (Copper Clad Aluminium Wire) voice coil guarantees an especially light weight and stiff moving assembly. These technological elements interact with each other, resulting in a high frequency extension of 28 kHz, a record for a tweeter featuring a 28 mm voice coil. An elegant and compact angled tweeter support is provided with the system: this allows easy installation both on the A-pillars and on the car dashboard. The correct angle of the tweeter improves the stereo image, essential for an engaging listening.\u003c\/p\u003e\n\u003ch2\u003eHertz Mille Pro MPK 1650.3 - Product Features\u003c\/h2\u003e\n\u003ch3\u003eMP 28.3:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDouble Neodymium magnet optimized with FEA simulations, for maximum field symmetry and exceptional transfer efficiency.\u003c\/li\u003e\n\u003cli\u003eTetolon Fiber dome optimized with FEA simulations, for excellent dynamics and angle dispersion.\u003c\/li\u003e\n\u003cli\u003eLarger rear chamber, to reduce Fs down to 900Hz.\u003c\/li\u003e\n\u003cli\u003eNatural fibre non-woven sound-absorption material, for better damping and more natural acoustic emission.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMP 165P.3:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 ohm nominal impedance to exploit all the amplifier’s power.\u003c\/li\u003e\n\u003cli\u003e14 mm height pure copper voice coil wound on a Polyamide former, for exceptional power handling.\u003c\/li\u003e\n\u003cli\u003e95 mm diameter magnet to maximize the control over the whole excursion.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically optimized for utmost linearity and dispersion in the mid frequency range.\u003c\/li\u003e\n\u003cli\u003e“Boundary Free” rubber surround, for improved efficiency and wider mid-bass frequency.\u003c\/li\u003e\n\u003cli\u003eLow mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo.\u003c\/li\u003e\n\u003cli\u003eFull protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMPCX 165.3:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e“Hi-Contour” two-position control, to select the tweeter hi-pass crossover point according to the tweeter position\/angle towards the listener.\u003c\/li\u003e\n\u003cli\u003eThree terminals for tweeter level adjustment in 2 dB steps, to fine-tune the transducer’s emission.\u003c\/li\u003e\n\u003cli\u003eExtremely high quality bi-metallized 160V polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid\/hi-frequencies.\u003c\/li\u003e\n\u003cli\u003eAir wound inductors built on pure copper-wire with up to 1mm diameter, for low losses on the woofer section where high transient currents are demanded.\u003c\/li\u003e\n\u003cli\u003eHigh power rating Wirewound resistors, to ensure performance stability even at high operating temperature. The Wirewound build construction grants low parasitic series inductance thus reducing losses at high frequencies, especially for resistors in series to the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38.3459%;\"\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter diaphragm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8797%;\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 31.015%;\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e165 (6.5)\u003c\/p\u003e\n\u003cp\u003e35 (1.38)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38.3459%;\"\u003e\n\u003cp\u003e\u003cstrong\u003eVoice Coil Ø\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8797%;\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 31.015%;\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e25 (1)\u003c\/p\u003e\n\u003cp\u003e28 (1.1)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38.3459%;\"\u003e\u003cstrong\u003ePower Handling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 26.8797%;\"\u003e\n\u003cp\u003eW peak\u003c\/p\u003e\n\u003cp\u003eW continuous\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 31.015%;\"\u003e\n\u003cp\u003e250\u003c\/p\u003e\n\u003cp\u003e125\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38.3459%;\"\u003e\u003cstrong\u003eSensitivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 26.8797%;\"\u003edB SPL\u003c\/td\u003e\n\u003ctd style=\"width: 31.015%;\"\u003e93.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38.3459%;\"\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 26.8797%;\"\u003eΩ\u003c\/td\u003e\n\u003ctd style=\"width: 31.015%;\"\u003e3\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38.3459%;\"\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 26.8797%;\"\u003eHz\u003c\/td\u003e\n\u003ctd style=\"width: 31.015%;\"\u003e45 - 25k\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38.3459%;\"\u003e\u003cstrong\u003eCrossover\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 26.8797%;\"\u003e\n\u003cp\u003eMidrange\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003cp\u003eCut-Off\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 31.015%;\"\u003e\n\u003cp\u003eLo-pass 12 dB Oct.\u003c\/p\u003e\n\u003cp\u003eHi-pass 12 dB Oct.\u003c\/p\u003e\n\u003cp\u003e3 kHz (Hi-Cont. = ON)\u003c\/p\u003e\n\u003cp\u003e4 kHz (Hi-Cont. = OFF)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38.3459%;\"\u003e\u003cstrong\u003eAdjustment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 26.8797%;\"\u003e\n\u003cp\u003eTweeter Level\u003c\/p\u003e\n\u003cp\u003eHi-Contour\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 31.015%;\"\u003e\n\u003cp\u003e+2 \/ 0 \/ -2 dB\u003c\/p\u003e\n\u003cp\u003eON\/OFF\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 38.3459%;\"\u003e\n\u003cp\u003e\u003cstrong\u003eWeight of one component\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003cp\u003eCrossover\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8797%;\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 31.015%;\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e1.20 (2.65)\u003c\/p\u003e\n\u003cp\u003e0.075 (0.16)\u003c\/p\u003e\n\u003cp\u003e0.37 (0.82)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-PRO_MLK1650_3_Tech_Sheet1.pdf\" title=\"Hertz Mille Pro MPK 1650.3 - Car Audio Speaker System - Tech Sheet\" target=\"_blank\"\u003eHertz Mille Pro MPK 1650.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Mille_PRO_Owners_Manual_revE-1.pdf\" title=\"Hertz Mille Pro Speakers - User Manual\" target=\"_blank\"\u003eHertz Mille Pro Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31573708570658,"sku":"8018823120975","price":399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-pro-mpk1650p-speaker-system.jpg?v=1649942571"},{"product_id":"hertz-mille-pro-mpk-163-3-car-audio-speaker-system","title":"Hertz Mille Pro MPK 163.3 - Speaker System","description":"\u003cp\u003eThe three way Hertz Mille Pro MPK 163.3 car audio speaker system is dedicated to those who want the best: the \u003ca title=\"Hertz Mille Pro MP 70.3 Midrange\" href=\"hertz-mille-pro-mp-70-3-car-audio-midrange-speaker-set\"\u003eMille Pro MP 70.3 midrange\u003c\/a\u003e featuring Neodymium double magnets inside the coil produces an enthralling mid range, perfect to combine with the powerful mid-low of the \u003ca title=\"Hertz Mille Pro MP 165.3 Woofer\" href=\"hertz-mille-pro-mp-165-3-woofer-set\"\u003eMP 165.3 woofer\u003c\/a\u003e as well as with the detailed high range of the \u003ca title=\"Hertz Mille Pro MP25.3 Tweeter\" href=\"hertz-mille-pro-mp-25-3-car-audio-tweeter-set\"\u003eMP25.3 tweeter\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe 20 mm coil of the MP 70.3 maximizes the dynamics; the V-cone® profile enhances off-axis dispersion and the Boundary Free Surround allows for a wider extension towards the low frequency range.\u003c\/p\u003e\n\u003cp\u003eThe dedicated MPCX 3.3 crossover provides optimized crossover points to exploit the midrange remarkable extension using ultra-selected components.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eHertz Mille Pro MPK 163.3 - Product Features\u003c\/h2\u003e\n\u003ch3\u003eMP 25.3:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTetolon fiber soft dome, for a natural yet detailed reproduction of musical nuances.\u003c\/li\u003e\n\u003cli\u003e“Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion.\u003c\/li\u003e\n\u003cli\u003eHigh density flux Neodymium magnet, optimized for utmost control during high energy dynamic transients in the mid-high frequency range.\u003c\/li\u003e\n\u003cli\u003e25mm ferrofluid-cooled mobile voice coil.\u003c\/li\u003e\n\u003cli\u003eRear chamber filled with selected damping material and sized for lower Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.\u003c\/li\u003e\n\u003cli\u003eFaceplate featuring FEM (Finite Element Modeling) optimized geometry, for high linearity in off-axis installations.\u003c\/li\u003e\n\u003cli\u003eWide array of installation accessories, for an easy OEM integration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMP 70.3:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSymmetrical dual Neodymium magnet structure specifically developed with FEM (Finite Element Modeling) simulations, for superior dynamics and control.\u003c\/li\u003e\n\u003cli\u003e20 mm CCAW double layer voice coil wound on a Polyamide former with 8 decompression holes, for exceptional power handling and compression-free reproduction.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically optimized for utmost linearity and dispersion in the mid-high frequency range.\u003c\/li\u003e\n\u003cli\u003e“Boundary Free” rubber surround, for better efficiency and wider mid-bass frequency.\u003c\/li\u003e\n\u003cli\u003eAnti-vibration rubber magnet cover, to damp spurious vibrations, removable to fit limited mounting depth installations.\u003c\/li\u003e\n\u003cli\u003eAcoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo.\u003c\/li\u003e\n\u003cli\u003eFull protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMP 165.3:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePure copper voice coil wound on a Polyamide former for high power handling combined with very low intermodulation distortion of vocals.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically optimized for utmost linearity and dispersion in the mid frequency range.\u003c\/li\u003e\n\u003cli\u003e“Boundary Free” rubber surround, for improved efficiency and wider mid-bass frequency.\u003c\/li\u003e\n\u003cli\u003eHigh density flux ferrite magnet combined with very low carbon content iron plates, for low distortion at high power levels.\u003c\/li\u003e\n\u003cli\u003eLow mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo.\u003c\/li\u003e\n\u003cli\u003eFull protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMPCX 3.3:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-position (0 \/ +2 dB) switch for tweeter \u0026amp; midrange level adjustments, to fine-tune the transducers emission according to their installation position.\u003c\/li\u003e\n\u003cli\u003e100V extremely high quality bi-metallized polyester film capacitors in the tweeter section, for maximum sound transparency and neat hi-frequencies.\u003c\/li\u003e\n\u003cli\u003e1mm pure copper wire low series resistance inductors, for low dissipation losses on the woofer section where high transient currents are demanded.\u003c\/li\u003e\n\u003cli\u003eCompact footprint design for easy installation, with top vent grille for efficient heat dissipation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eMidrange\u003c\/p\u003e\n\u003cp\u003eTweeter diaphragm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e165 (6.5)\u003c\/p\u003e\n\u003cp\u003e70 (3)\u003c\/p\u003e\n\u003cp\u003e29 (1.14)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eVoice Coil Ø\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eMidrange\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003emm (in.)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e25 (1)\u003c\/p\u003e\n\u003cp\u003e20 (0.8)\u003c\/p\u003e\n\u003cp\u003e25 (1)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Handling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eW peak\u003c\/p\u003e\n\u003cp\u003eW continuous\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e300\u003c\/p\u003e\n\u003cp\u003e150\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensitivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003edB SPL\u003c\/td\u003e\n\u003ctd\u003e92\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eΩ\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHz\u003c\/td\u003e\n\u003ctd\u003e40 - 22.5k\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCrossover\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eMidrange\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eLo-Pass 450Hz - 6 dB Oct\u003c\/p\u003e\n\u003cp\u003eBand-Pass 450 ÷ 5.5k Hz - 6 dB Oct.\u003c\/p\u003e\n\u003cp\u003eHi-Pass 5.5kHz - 12 dB Oct\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAdjustment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTweeter Level\u003c\/p\u003e\n\u003cp\u003eMidrange Level\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0 \/ +2 dB\u003c\/p\u003e\n\u003cp\u003e0 \/ +2 dB\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eWeight of one component\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eMidrange\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003cp\u003eCrossover\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ekg (lb)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e1.07 (2.36)\u003c\/p\u003e\n\u003cp\u003e0.17 (0.37)\u003c\/p\u003e\n\u003cp\u003e0.07 (0.15)\u003c\/p\u003e\n\u003cp\u003e0.43 (0.95)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca title=\"Hertz Mille Pro MPK 163.3 - Car Audio Speaker System - Tech Sheet\" href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-PRO_MPK163_Tech_Sheet.pdf\" target=\"_blank\"\u003eHertz Mille Pro MPK 163.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Hertz Mille Pro Speakers - User Manual\" href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Mille_PRO_Owners_Manual_revE8.pdf\" target=\"_blank\"\u003e\u003cspan\u003eHertz Mille Pro Speakers - User Manual\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31573592178722,"sku":"8018823114042","price":499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-pro-mpk163-speaker-system.jpg?v=1649939802"},{"product_id":"hertz-mille-pro-mpk-130-3-car-audio-speaker-system","title":"Hertz Mille Pro MPK 130.3 - Speaker System","description":"\u003cp\u003eThe Hertz Mille Pro MPK 130.3 car audio speaker system has been designed to ensure a wide low frequency response, even in cars with no space for a subwoofer. Thanks to the V-cone® and Boundary Free Surround technologies the Mille Pro MP 130.3 woofer boasts outstanding dispersion features and generates high SPL with compact dimensions.\u003c\/p\u003e\n\u003cp\u003eThe dedicated crossover MPCX 2.3 has been designed to exploit the wide extension of the Mille Pro MP 130.3 woofers, ensuring a natural transition towards the \u003ca href=\"hertz-mille-pro-mp-25-3-car-audio-tweeter-set\" title=\"Hertz Mille Pro MP 25.3 Tweeters\"\u003eMP 25.3 tweeter\u003c\/a\u003e, for maximum natural acoustic emission. The 1mm low resistance copper filter coil of the woofer maximizes its efficiency.\u003c\/p\u003e\n\u003cp\u003eThe MPCX 2.3 crossover features a tweeter level (0\/+2 dB) to calibrate the MP 25.3 acoustic emission level comparing it to the woofer one.\u003c\/p\u003e\n\u003ch2\u003eHertz Mille Pro MPK 130.3 - Product Features\u003c\/h2\u003e\n\u003ch3\u003eMP 25.3 Tweeter:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTetolon fiber soft dome, for a natural yet detailed reproduction of musical nuances.\u003c\/li\u003e\n\u003cli\u003e“Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion.\u003c\/li\u003e\n\u003cli\u003eHigh density flux Neodymium magnet, optimized for utmost control during high energy dynamic transients in the mid-high frequency range.\u003c\/li\u003e\n\u003cli\u003e25mm ferrofluid-cooled mobile voice coil.\u003c\/li\u003e\n\u003cli\u003eRear chamber filled with selected damping material and sized for lower Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.\u003c\/li\u003e\n\u003cli\u003eFaceplate featuring FEM (Finite Element Modeling) optimized geometry, for high linearity in off-axis installations.\u003c\/li\u003e\n\u003cli\u003eWide array of installation accessories, for an easy OEM integration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMP 130.3 Mid-Range Woofer:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePure copper voice coil wound on a Polyamide former combining excellent power handling combined with fast musical transients response.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically optimized for utmost linearity and dispersion in the mid frequency range.\u003c\/li\u003e\n\u003cli\u003e“Boundary Free” rubber surround, for improved efficiency and wider mid-bass frequency.\u003c\/li\u003e\n\u003cli\u003eHigh density flux ferrite magnet combined with very low carbon content iron plates, for low distortion at high power levels.\u003c\/li\u003e\n\u003cli\u003eLow mounting depth, acoustically transparent aluminium alloy basket with spider vent holes.\u003c\/li\u003e\n\u003cli\u003eFull protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMPCX 2.3 Crossover:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-position (0 \/ +2 dB) switch for tweeter level adjustments, to fine-tune the transducers emission.\u003c\/li\u003e\n\u003cli\u003e160V extremely high quality bi-metallized polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid\/hi-frequencies.\u003c\/li\u003e\n\u003cli\u003e1mm pure copper wire low series resistance inductors, for low dissipation losses on the woofer section where high transient currents are demanded.\u003c\/li\u003e\n\u003cli\u003eSmall footprint design for easy installation, with top vent grille for efficient heat dissipation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter diaphragm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e130 (5)\u003c\/p\u003e\n\u003cp\u003e29 (1.14)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eVoice Coil Ø\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e25 (1)\u003c\/p\u003e\n\u003cp\u003e25 (1)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Handling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eW peak\u003c\/p\u003e\n\u003cp\u003eW continuous\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e200\u003c\/p\u003e\n\u003cp\u003e100\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensitivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003edB SPL\u003c\/td\u003e\n\u003ctd\u003e91\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eΩ\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHz\u003c\/td\u003e\n\u003ctd\u003e60 - 22.5k\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCrossover\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMidrange\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eLow pass 3,5 kHz @ -6 dB Oct.\u003c\/p\u003e\n\u003cp\u003eHi pass 3,5k Hz @ -12 dB Oct.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAdjustment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTweeter Level\u003c\/td\u003e\n\u003ctd\u003e0 \/ +2 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eWeight of one component\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003cp\u003eCrossover\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003cp\u003ekg (lb)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e0.95 (2.09)\u003c\/p\u003e\n\u003cp\u003e0.07 (0.15)\u003c\/p\u003e\n\u003cp\u003e0.16 (0.35)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-PRO_MPK130_Tech_Sheet.pdf\" title=\"Hertz Mille Pro MPK 130.3 - Car Audio Speaker System - Tech Sheet\" target=\"_blank\"\u003eHertz Mille Pro MPK 130.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Mille_PRO_Owners_Manual_revE7.pdf\" title=\"Hertz Mille Pro Speakers - User Manual\" target=\"_blank\"\u003eHertz Mille Pro Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31573506490402,"sku":"EH02-MPK130","price":299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-pro-mpk130-speaker-system.jpg?v=1649938767"},{"product_id":"hertz-mille-pro-mpx-165-3-car-audio-coaxial-speakers","title":"Hertz Mille Pro MPX 165.3 - Coaxial Speakers","description":"\u003cp\u003eThe coax tweeter concentric to the woofer of the Hertz Mille Pro MPX 165.3 car audio coaxial speakers allows for one single linear-phase emission point, for a natural timbre providing a detailed sound stage.\u003c\/p\u003e\n\u003cp\u003eThanks to the “Center Tuning Duct” geometry, the tweeter resonance frequency is especially low and the employment of damping materials for the inside provides for a linear acoustic emission. The acoustic lens optimizes its off-axis response, which is typical with door installation of coax speakers; besides, the 36 mm diameter woofer generates deep and controlled bass frequencies.\u003c\/p\u003e\n\u003ch4\u003eOptional Grille\u003c\/h4\u003e\n\u003cp\u003eOptional full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.\u003c\/p\u003e\n\u003ch2\u003eHertz Mille Pro MPX 165.3 - Product Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConcentric coaxial tweeter built in the woofer voice coil, achieving one single point of emission, to re-create the virtual sound-stage like in live music performances.\u003c\/li\u003e\n\u003cli\u003e20 mm voice coil Tetolon fiber soft dome tweeter, featuring “Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion.\u003c\/li\u003e\n\u003cli\u003eTweeter support working as a rear chamber, sized for low Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.\u003c\/li\u003e\n\u003cli\u003e36 mm pure copper woofer voice coil wound on a Polyamide former, for outstanding power handling and dynamic compression-free reproduction.\u003c\/li\u003e\n\u003cli\u003ePressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically refined to perfectly match with the tweeter emission ensuring phase consistency in the crossover area.\u003c\/li\u003e\n\u003cli\u003e“Boundary Free” rubber surround, for improved efficiency and wider mid-bass frequency.\u003c\/li\u003e\n\u003cli\u003eOver-sized ferrite magnet combined with very low carbon content iron plates, for low distortion at high power levels.\u003c\/li\u003e\n\u003cli\u003eLow mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo.\u003c\/li\u003e\n\u003cli\u003eAnti-vibration rubber magnet cover, to damp spurious vibrations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Size:\u003c\/strong\u003e\u003cspan\u003e 25\u003c\/span\u003emm (1 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Size: \u003c\/strong\u003e165mm (6.5 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Voice Coil Ø:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e20mm (0.8 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Voice Coil Ø:\u003c\/strong\u003e\u003cspan\u003e 36\u003c\/span\u003emm (1 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e\u003cspan\u003e 200\u003c\/span\u003eW Peak \/ 100W Continuous \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e\u003cspan\u003e 45\u003c\/span\u003eHz ÷ 21.5kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Magnet size:\u003c\/strong\u003e\u003cspan\u003e 29.5\u003c\/span\u003emm x 22mm x 4mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Magnet size:\u003c\/strong\u003e\u003cspan\u003e 90\u003c\/span\u003emm x 45mm x 17mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one speaker:\u003c\/strong\u003e\u003cspan\u003e 1\u003c\/span\u003e.27kg (2.8 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Magnet:\u003c\/strong\u003e\u003cspan\u003e Neodymium\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eWoofer Magnet:\u003c\/strong\u003e High density flux ferrite\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDome\/Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePressed-pulp cone with cotton fibers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXmech:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e±6mm (0.24 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-PRO_MPX-165.pdf\" title=\"Hertz Mille Pro MPX 165.3 - Car Audio Coaxial Speakers - Tech Sheet\" target=\"_blank\"\u003eHertz Mille Pro MPX 165.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Mille_PRO_Owners_Manual_revE5.pdf\" title=\"Hertz Mille Pro Speakers - User Manual\" target=\"_blank\"\u003eHertz Mille Pro Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Speaker Pair Only","offer_id":31573192441890,"sku":"EH02-MPX165","price":229.0,"currency_code":"GBP","in_stock":true},{"title":"with Speaker Grilles","offer_id":31573192474658,"sku":"EH02-MPX165-MG165","price":249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-pro-mpx165-3-coaxial-speakers.jpg?v=1649943414"},{"product_id":"hertz-mille-pro-mpg-165-speaker-grille","title":"Hertz Mille MPG 165 Pro - Speaker Grille","description":"\u003cp\u003eThe optional Hertz Mille Pro MPG 165.3 woofer grille designed for the \u003ca href=\"\/products\/hertz-mille-pro-mpk-165-3-car-audio-speaker-system\" title=\"Hertz Mille Pro MPK 165.3 Speaker System\"\u003eMille Pro MPK 165.3 Speaker System\u003c\/a\u003e is made of die-cast aluminium, featuring diamond-cut aluminium Hertz logo.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31571010519074,"sku":"8018823114578","price":19.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-pro-mpg165-speaker-grille.jpg?v=1652285610"},{"product_id":"hertz-mille-pro-mpx-690-3-car-audio-coaxial-speakers","title":"Hertz Mille Pro MPX 690.3 - Coaxial Speakers","description":"\u003cp\u003eThe three-way Hertz Mille Pro MPX 690.3 car audio coaxial, optimized for a rear deck mount, features a 28 mm Tetolon tweeter with Neodymium magnet and faceplate profile maximizing the off-axis dispersion.\u003c\/p\u003e\n\u003cp\u003eA supertweeter strengthens the emission of very high frequencies and the basket radial venting system ensures low operating temperatures. The sound has an impressive impact and ensures perfect control, also with extensive high dynamic listening.\u003c\/p\u003e\n\u003ch2\u003eHertz Mille Pro MPX 690.3 - Product Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e38 mm pure copper woofer voice coil wound on a Polyamide former for exceptional power handling and dynamic compression-free reproduction.\u003c\/li\u003e\n\u003cli\u003ePressed-pulp cone with cotton fibers material, combining stiffness and lightweight for a wide frequency response.\u003c\/li\u003e\n\u003cli\u003eLarge rubber surround designed for long throw and optimal sound damping.\u003c\/li\u003e\n\u003cli\u003eOver-sized ferrite magnet combined with very low carbon content iron plates, for low distortion at high power levels.\u003c\/li\u003e\n\u003cli\u003eAerodynamic thus acoustically transparent aluminium alloy basket, eliminates rear wave reflections.\u003c\/li\u003e\n\u003cli\u003eAnti-vibration rubber magnet cover, damps spurious vibrations.\u003c\/li\u003e\n\u003cli\u003e28mm voice coil Neodymium Tetolon fiber dome tweeter, for undistorted mid-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e20mm voice coil Neodymium Tetolon fiber dome super tweeter, to naturally compensate for drop-off in frequency response due to speaker horizontal installation.\u003c\/li\u003e\n\u003cli\u003eTweeter faceplate with geometry optimized with FEM (Finite Element Modeling) simulations, to provide excellent off-axis frequency response up to 24kHz by perfectly mixing the two tweeters’ emission.\u003c\/li\u003e\n\u003cli\u003eFull protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter diaphragm\u003c\/p\u003e\n\u003cp\u003eSupertweeter diaphragm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e(in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e6 x 9\u003c\/p\u003e\n\u003cp\u003e35 (1.4)\u003c\/p\u003e\n\u003cp\u003e29 (1.14)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eVoice Coil Ø\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWoofer\u003c\/p\u003e\n\u003cp\u003eTweeter\u003c\/p\u003e\n\u003cp\u003eSupertweeter\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e38 (1.5)\u003c\/p\u003e\n\u003cp\u003e28 (1.1)\u003c\/p\u003e\n\u003cp\u003e20 (0.8)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Handling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eW peak\u003c\/p\u003e\n\u003cp\u003eW continuous\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e260\u003c\/p\u003e\n\u003cp\u003e130\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eImpedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eΩ\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequence Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHz\u003c\/td\u003e\n\u003ctd\u003e30 - 24k\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCrossover\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIntegrated\u003c\/td\u003e\n\u003ctd\u003e4 k\/10k Hz @ 6 dB Oct\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWoofer Magnet size \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003emm\u003c\/p\u003e\n\u003cp\u003e(in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e107 x 45 x 20\u003c\/p\u003e\n\u003cp\u003e(4.21 x 1.77 x 0.79)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight of one speaker\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ekg (lb.)\u003c\/td\u003e\n\u003ctd\u003e2.28 (5.03)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWoofer Magnet\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh density flux ferrite\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTweeter Magnet\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNeodymium\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCone\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePressed-pulp cone with cotton fibers\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDome\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTetolon\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eXmech\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003emm (in.)\u003c\/td\u003e\n\u003ctd\u003e±8 (0.31)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-PRO_MPX-690_Tech_Sheet.pdf\" title=\"Hertz Mille Pro MPX 690.3 - Car Audio Coaxial Speakers - Tech Sheet\" target=\"_blank\"\u003eHertz Mille Pro MPX 690.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Mille_PRO_Owners_Manual_revE6.pdf\" title=\"Hertz Mille Pro Speakers - User Manual\" target=\"_blank\"\u003eHertz Mille Pro Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31573341044770,"sku":"8018823114332","price":329.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-pro-mpx690-3-coaxial-speakers-set.jpg?v=1649943656"},{"product_id":"hertz-mille-pro-mp-250-d4-3-subwoofer","title":"Hertz Mille Pro MP 250 D4.3 - Subwoofer - 250mm","description":"\u003cp\u003eOutstanding performance in a compact size, this is the target of Mille Pro car audio subwoofers. On the strength of its know-how acquired with Mille Legend, the R\u0026amp;D team has optimized the production process to offer the “Hertz Sound Experience” to a wider audience using part of the technologies and materials of the flagship line.\u003c\/p\u003e\n\u003cp\u003eThe Hertz Mille Pro MP 250 D4.3 cone is made by pressing paper pulp with the injection of mineral powders, the same construction technique used for Legend. The V-cone® profile increases rigidity, allowing the cone to function like a piston. Surround materials consist of high-purity IIR-butyl rubber. Like the \u003ca href=\"hertz-mille-legend-ml-2000-3-subwoofer\" title=\"Hertz Mille Legend ML2000.3\"\u003eLegend ML2000.3\u003c\/a\u003e and \u003ca href=\"hertz-mille-legend-ml-2500-3-subwoofer\" title=\"Hertz Mille Legend ML2500.3\"\u003eML2500.3\u003c\/a\u003e, the Mille PRO subwoofers are built with Boundary Free Surround technology allowing for a greater emission surface with equal diameter, generating higher sound pressure.\u003c\/p\u003e\n\u003cp\u003eThe compact 6-spoke aluminum alloy anti-resonant basket is the same as the top model ML 2500.3 and contributes to the subwoofer’s mechanical damping, being absolutely transparent to the sound. The 65-mm 4-layer voice coil is higher than 60 mm and wound in a TIL-P former, thus delivering high linear displacement. The 4 Ω + 4 Ω DVC impedance configuration improves versatility to match any amplifier system. The air cooling and decompression system avoids the need for a centre hole on the bottom plate with three advantages:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBetter thermal inertia to ensure low operating temperatures during musical transients;\u003c\/li\u003e\n\u003cli\u003eMaximization of the magnetic field induced to the coil with the same overall motor dimensions. Thanks to a greater amount of iron in the pole the likelihood of magnetic saturation decreases exploiting the maximum flux density generated from the magnet;\u003c\/li\u003e\n\u003cli\u003ePossibility to install the subwoofer right on the box wall, taking full advantage of its minimal dimensions. A damping rubber disk, provided with the product, secures the subwoofer to the box and ensures air exchange for the 10 vents on the bottom.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe holes behind the voice coil winding and the 10 vents on the bottom plate ensure greater air exchange to the coil inner layers and work in synergy with an innovative assembly system. It forces the air to pass through the air gap to keep the coil operating temperature low, even with the most extreme musical programs.\u003c\/p\u003e\n\u003cp\u003eThe terminal uses solid push connectors with an antishort circuit cover accepting cables up to 8 AWG to provide ultra-low wiring resistance in low impedance configurations (1ohm).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eErgonomic, compact design, specifically developed for sealed box enclosures starting at 17 lt volume.\u003c\/li\u003e\n\u003cli\u003eCCAW, 65 mm (2,5”) 4-layer voice coil, capable of handling 1200 W musical power. The 4 Ω + 4 Ω DVC impedance configuration improves versatility to match any amplifier system.\u003c\/li\u003e\n\u003cli\u003eVoice coil wound on TIL-P material with venting holes behind the winding. This combines efficient heat dissipation with a high Qms factor (low mechanical loss) for bursting dynamic sound.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® with optimized geometry for high cone stiffness and strong resistance to deformation even at maximum excursions.\u003c\/li\u003e\n\u003cli\u003eBoundary Free IIR rubber surround, for higher SPL performance while keeping a nominal external diameter.\u003c\/li\u003e\n\u003cli\u003eMineral-injected paper cone, for superior rigidity and damping.\u003c\/li\u003e\n\u003cli\u003eExtremely acoustically transparent anti-resonant aluminium alloy basket with six-spokes standing structure and built-in venting holes underneath the spider.\u003c\/li\u003e\n\u003cli\u003eCNC machined elegant diamond-cut basket edge featuring the Hertz logo.\u003c\/li\u003e\n\u003cli\u003eTerminal block accepting cables up to 8 AWG to provide ultra-low wiring resistance in low impedance configurations. A plastic cover prevents any accidental short-circuit.\u003c\/li\u003e\n\u003cli\u003ePossibility to secure the subwoofer to the box wall, taking full advantage of its minimal dimensions.\u003c\/li\u003e\n\u003cli\u003eHigh performance compact motor with a superior magnetic field transferred to the coil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e250mm (10 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice Coil Ø:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e65mm (2.56 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1200W Peak \/ 600W Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003cspan\u003e 4\u003c\/span\u003e+4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentre to centre distance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e251mm (9.88 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet size:\u003c\/strong\u003e\u003cspan\u003e 156mm x 80mm x 35mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal driver displacement:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1.57L (0.03 cu.in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole diameter:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5.5mm (0.22 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one speaker:\u003c\/strong\u003e\u003cspan\u003e 7\u003c\/span\u003e.8kg (17.2 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh density flux ferrite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePressed-pulp cone with mineral powders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXmech:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e±27mm (1.06 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFurther Information\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-PRO_MP250_3_D4_Tech_Sheet.pdf\" target=\"_blank\" title=\"Hertz Mille Pro MP 250 D4.3 - Subwoofer - Tech Sheet\" rel=\"noopener noreferrer\"\u003eHertz Mille Pro MP 250 D4.3 - Subwoofer - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Hertz_Mille-Pro-sub_User_Manual_rev_D2.pdf\" target=\"_blank\" title=\"Hertz Mille Pro Speakers - User Manual\" rel=\"noopener noreferrer\"\u003eHertz Mille Pro Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Subwoofer Only","offer_id":31574768779298,"sku":"HRT-MP250-D4","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"with MPG Grille","offer_id":31574768812066,"sku":"HRT-MP250-D4-MPG","price":429.0,"currency_code":"GBP","in_stock":true},{"title":"with MG Grille","offer_id":31574768877602,"sku":"HRT-MP250-D4-MG","price":409.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-pro-mp300-d4-subwoofer.jpg?v=1652287027"},{"product_id":"hertz-mille-pro-mp-250-d2-3-subwoofer","title":"Hertz Mille Pro MP 250 D2.3 - Subwoofer - 250mm","description":"\u003cp\u003eOutstanding performance in a compact size, this is the target of Mille Pro car audio subwoofers. On the strength of its know-how acquired with Mille Legend, the R\u0026amp;D team has optimized the production process to offer the “Hertz Sound Experience” to a wider audience using part of the technologies and materials of the flagship line.\u003c\/p\u003e\n\u003cp\u003eThe Hertz Mille Pro MP 250 D2.3 cone is made by pressing paper pulp with the injection of mineral powders, the same construction technique used for Legend. The V-cone® profile increases rigidity, allowing the cone to function like a piston. Surround materials consist of high-purity IIR-butyl rubber. Like the \u003ca title=\"Hertz Mille Legend ML2000.3 Subwoofer\" href=\"hertz-mille-legend-ml-2000-3-subwoofer\"\u003eLegend ML2000.3\u003c\/a\u003e and \u003ca title=\"Hertz Mille Legend ML2500.3 Subwoofer\" href=\"hertz-mille-legend-ml-2500-3-subwoofer\"\u003eML2500.3\u003c\/a\u003e, the Mille PRO subwoofers are built with Boundary Free Surround technology allowing for a greater emission surface with equal diameter, generating higher sound pressure.\u003c\/p\u003e\n\u003cp\u003eThe compact 6-spoke aluminum alloy anti-resonant basket is the same as the top model ML 2500.3 and contributes to the subwoofer’s mechanical damping, being absolutely transparent to the sound. The 65-mm 4-layer voice coil is higher than 60 mm and wound in a TIL-P former, thus delivering high linear displacement. The 2 Ω + 2 Ω DVC impedance configuration improves versatility to match any amplifier system. The air cooling and decompression system avoids the need for a centre hole on the bottom plate with three advantages:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBetter thermal inertia to ensure low operating temperatures during musical transients;\u003c\/li\u003e\n\u003cli\u003eMaximization of the magnetic field induced to the coil with the same overall motor dimensions. Thanks to a greater amount of iron in the pole the likelihood of magnetic saturation decreases exploiting the maximum flux density generated from the magnet;\u003c\/li\u003e\n\u003cli\u003ePossibility to install the subwoofer right on the box wall, taking full advantage of its minimal dimensions. A damping rubber disk, provided with the product, secures the subwoofer to the box and ensures air exchange for the 10 vents on the bottom.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe holes behind the voice coil winding and the 10 vents on the bottom plate ensure greater air exchange to the coil inner layers and work in synergy with an innovative assembly system. It forces the air to pass through the air gap to keep the coil operating temperature low, even with the most extreme musical programs.\u003c\/p\u003e\n\u003cp\u003eThe terminal uses solid push connectors with an antishort circuit cover accepting cables up to 8 AWG to provide ultra-low wiring resistance in low impedance configurations (1ohm).\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eErgonomic, compact design, specifically developed for sealed box enclosures starting at 17 lt volume.\u003c\/li\u003e\n\u003cli\u003eCCAW, 65 mm (2,5”) 4-layer voice coil, capable of handling 1200 W musical power. The 2 Ω + 2 Ω DVC impedance configuration improves versatility to match any amplifier system.\u003c\/li\u003e\n\u003cli\u003eVoice coil wound on TIL-P material with venting holes behind the winding. This combines efficient heat dissipation with a high Qms factor (low mechanical loss) for bursting dynamic sound.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® with optimized geometry for high cone stiffness and strong resistance to deformation even at maximum excursions.\u003c\/li\u003e\n\u003cli\u003eBoundary Free IIR rubber surround, for higher SPL performance while keeping a nominal external diameter.\u003c\/li\u003e\n\u003cli\u003eMineral-injected paper cone, for superior rigidity and damping.\u003c\/li\u003e\n\u003cli\u003eExtremely acoustically transparent anti-resonant aluminium alloy basket with six-spokes standing structure and built-in venting holes underneath the spider.\u003c\/li\u003e\n\u003cli\u003eCNC machined elegant diamond-cut basket edge featuring the Hertz logo.\u003c\/li\u003e\n\u003cli\u003eTerminal block accepting cables up to 8 AWG to provide ultra-low wiring resistance in low impedance configurations. A plastic cover prevents any accidental short-circuit.\u003c\/li\u003e\n\u003cli\u003ePossibility to secure the subwoofer to the box wall, taking full advantage of its minimal dimensions.\u003c\/li\u003e\n\u003cli\u003eHigh performance compact motor with a superior magnetic field transferred to the coil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer size:\u003c\/strong\u003e 250mm (10 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice Coil Ø:\u003c\/strong\u003e 65mm (2.56 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e 1200W Peak \/ 600W Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 2+2\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentre to centre distance:\u003c\/strong\u003e 251mm (9.88 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet size:\u003c\/strong\u003e 165mm x 75mm x 35mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal driver displacement:\u003c\/strong\u003e 1.57L (0.03 cu.in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole diameter:\u003c\/strong\u003e 5.5mm (0.22 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one speaker:\u003c\/strong\u003e 8.2kg (18.08 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet:\u003c\/strong\u003e High density flux ferrite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCone:\u003c\/strong\u003e Pressed-pulp cone with mineral powders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXmech:\u003c\/strong\u003e ±26mm (1.06 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca rel=\"noopener noreferrer\" title=\"Hertz Mille Pro MP 250 D2.3 - Subwoofer - Tech Sheet\" href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-PRO_MP250_3_D2_Tech_Sheet.pdf\" target=\"_blank\"\u003eHertz Mille Pro MP 250 D2.3 - Subwoofer - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener noreferrer\" title=\"Hertz Mille Pro Speakers - User Manual\" href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Hertz_Mille-Pro-sub_User_Manual_rev_D3.pdf\" target=\"_blank\"\u003eHertz Mille Pro Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Subwoofer Only","offer_id":31573881978914,"sku":"HRT-MP250.3-D2","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"with MPG Grille","offer_id":31573882011682,"sku":"HRT-MP250.3-D2-MPG","price":429.0,"currency_code":"GBP","in_stock":true},{"title":"with MG Grille","offer_id":31573882044450,"sku":"HRT-MP250.3-D2-MG","price":409.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-pro-mp250-d2-subwoofer-5.jpg?v=1652284042"},{"product_id":"hertz-mille-mpg-250-pro-speaker-grille","title":"Hertz Mille MPG 250 Pro - Speaker Grille","description":"\u003cp\u003eThe optional MPG 250 Speaker Grille for the \u003ca href=\"\/products\/hertz-mille-pro-mp-250-d2-3-subwoofer\" title=\"Hertz Mille Pro M250 D2\"\u003eHertz Mille Pro M250 D2\u003c\/a\u003e \/ D4 subwoofer is made of die-cast aluminium, featuring a diamond-cut aluminium Hertz logo.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31570931580962,"sku":"8018823114592","price":79.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-pro-mpg250-speaker-grille.jpg?v=1649159820"},{"product_id":"hertz-mille-pro-mp-300-d4-3-subwoofer","title":"Hertz Mille Pro MP 300 D4.3 - Subwoofer - 300mm","description":"\u003cp\u003eOutstanding performance in a compact size, this is the target of Mille Pro car audio subwoofers. On the strength of its know-how acquired with Mille Legend, the R\u0026amp;D team has optimized the production process to offer the “Hertz Sound Experience” to a wider audience using part of the technologies and materials of the flagship line.\u003c\/p\u003e\n\u003cp\u003eThe MP 300 D4.3 cone is made by pressing paper pulp with the injection of mineral powders, the same construction technique used for Legend. The V-cone® profile increases rigidity, allowing the cone to function like a piston. Surround materials consist of high-purity IIR-butyl rubber. Like the \u003ca href=\"hertz-mille-legend-ml-2000-3-subwoofer\" title=\"Hertz Mille Legend ML2000.3 Subwoofer\"\u003eLegend ML2000.3\u003c\/a\u003e and \u003ca href=\"hertz-mille-legend-ml-2500-3-subwoofer\" title=\"Hertz Mille Legend ML2500.3 Subwoofer\"\u003eML2500.3\u003c\/a\u003e, the Mille PRO subwoofers are built with Boundary Free Surround technology allowing for a greater emission surface with equal diameter, generating higher sound pressure.\u003c\/p\u003e\n\u003cp\u003eThe compact 6-spoke aluminum alloy anti-resonant basket is the same as the top model ML 2500.3 and contributes to the subwoofer’s mechanical damping, being absolutely transparent to the sound.  The 65-mm 4-layer voice coil is higher than 60 mm and wound in a TIL-P former, thus delivering high linear displacement. The 4 Ω + 4 Ω DVC impedance configuration improves versatility to match any amplifier system. The air cooling and decompression system avoids the need for a centre hole on the bottom plate with three advantages:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBetter thermal inertia to ensure low operating temperatures during musical transients;\u003c\/li\u003e\n\u003cli\u003eMaximization of the magnetic field induced to the coil with the same overall motor dimensions. Thanks to a greater amount of iron in the pole the likelihood of magnetic saturation decreases exploiting the maximum flux density generated from the magnet;\u003c\/li\u003e\n\u003cli\u003ePossibility to install the subwoofer right on the box wall, taking full advantage of its minimal dimensions. A damping rubber disk, provided with the product, secures the subwoofer to the box and ensures air exchange for the 10 vents on the bottom.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe holes behind the voice coil winding and the 10 vents on the bottom plate ensure greater air exchange to the coil inner layers and work in synergy with an innovative assembly system. It forces the air to pass through the air gap to keep the coil operating temperature low, even with the most extreme musical programs. The terminal uses solid push connectors with an antishort circuit cover accepting cables up to 8 AWG to provide ultra-low wiring resistance in low impedance configurations (1ohm).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eErgonomic, compact design, specifically developed for sealed box enclosures starting at 27 lt volume.\u003c\/li\u003e\n\u003cli\u003eCCAW, 65 mm (2,5”) 4-layer voice coil, capable of handling 1200 W musical power. The 4 Ω + 4 Ω DVC impedance configuration improves versatility to match any amplifier system.\u003c\/li\u003e\n\u003cli\u003eVoice coil wound on TIL-P material with venting holes behind the winding. This combines efficient heat dissipation with a high Qms factor (low mechanical loss) for bursting dynamic sound.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® with optimized geometry for high cone stiffness and strong resistance to deformation even at maximum excursions.\u003c\/li\u003e\n\u003cli\u003eBoundary Free IIR rubber surround, for higher SPL performance while keeping a nominal external diameter.\u003c\/li\u003e\n\u003cli\u003eMineral-injected paper cone, for superior rigidity and damping.\u003c\/li\u003e\n\u003cli\u003eExtremely acoustically transparent anti-resonant aluminium alloy basket with six-spokes standing structure and built-in venting holes underneath the spider.\u003c\/li\u003e\n\u003cli\u003eCNC machined elegant diamond-cut basket edge featuring the Hertz logo.\u003c\/li\u003e\n\u003cli\u003eTerminal block accepting cables up to 8 AWG to provide ultra-low wiring resistance in low impedance configurations. A plastic cover prevents any accidental short-circuit.\u003c\/li\u003e\n\u003cli\u003ePossibility to secure the subwoofer to the box wall, taking full advantage of its minimal dimensions.\u003c\/li\u003e\n\u003cli\u003eHigh performance compact motor with a superior magnetic field transferred to the coil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer size:\u003c\/strong\u003e\u003cspan\u003e 300mm (12 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice Coil Ø:\u003c\/strong\u003e\u003cspan\u003e 65.5mm (2.58 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1200W Peak \/ 600W Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003cspan\u003e 4\u003c\/span\u003e+4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentre to centre distance:\u003c\/strong\u003e\u003cspan\u003e 302mm (11.89 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet size:\u003c\/strong\u003e\u003cspan\u003e 165mm x 75mm x 35mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal driver displacement:\u003c\/strong\u003e\u003cspan\u003e 3.6 L (0.06 cu in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole diameter:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5.5mm (0.22 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one speaker:\u003c\/strong\u003e\u003cspan\u003e 8.63kg (19.03 lb)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh density flux ferrite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePressed-pulp cone with mineral powders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXmech:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e±27mm (1.06 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFurther Information\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-PRO_MP300_D4_TechSheet.pdf\" target=\"_blank\" title=\"Hertz Mille Pro MP 300 D4.3 - Subwoofer - Tech Sheet\" rel=\"noopener noreferrer\"\u003eHertz Mille Pro MP 300 D4.3 - Subwoofer - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Hertz_Mille-Pro-sub_User_Manual_rev_D1.pdf\" target=\"_blank\" title=\"Hertz Mille Pro Speakers - User Manual\" rel=\"noopener noreferrer\"\u003eHertz Mille Pro Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Subwoofer Only","offer_id":31575126704162,"sku":"HRT-MP300-D4","price":399.0,"currency_code":"GBP","in_stock":true},{"title":"with MPG Grille","offer_id":31575126736930,"sku":"HRT-MP300-D4-MPG","price":459.0,"currency_code":"GBP","in_stock":true},{"title":"with MG Grille","offer_id":31575126769698,"sku":"HRT-MP300-D4-MG","price":439.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-pro-mp300-d4-subwoofer_b9dcdf6c-f28a-45eb-9934-3f7fd43211f5.jpg?v=1652282099"},{"product_id":"hertz-mille-pro-mp-300-d2-3-subwoofer","title":"Hertz Mille Pro MP 300 D2.3 - Subwoofer - 300mm","description":"\u003cp\u003eOutstanding performance in a compact size, this is the target of Mille Pro car audio subwoofers. On the strength of its know-how acquired with Mille Legend, the R\u0026amp;D team has optimized the production process to offer the “Hertz Sound Experience” to a wider audience using part of the technologies and materials of the flagship line.\u003c\/p\u003e\n\u003cp\u003eThe MP 300 D2.3 cone is made by pressing paper pulp with the injection of mineral powders, the same construction technique used for Legend. The V-cone® profile increases rigidity, allowing the cone to function like a piston. Surround materials consist of high-purity IIR-butyl rubber. Like the \u003ca href=\"hertz-mille-legend-ml-2000-3-subwoofer\" title=\"Hertz Mille Legend ML2000.3\"\u003eLegend ML2000.3\u003c\/a\u003e and \u003ca href=\"hertz-mille-legend-ml-2500-3-subwoofer\" title=\"Hertz Mille Legend ML2500.3 Subwoofer\"\u003eML2500.3\u003c\/a\u003e, the Mille PRO subwoofers are built with Boundary Free Surround technology allowing for a greater emission surface with equal diameter, generating higher sound pressure.\u003c\/p\u003e\n\u003cp\u003eThe compact 6-spoke aluminum alloy anti-resonant basket is the same as the top model ML 2500.3 and contributes to the subwoofer’s mechanical damping, being absolutely transparent to the sound.  The 65-mm 4-layer voice coil is higher than 60 mm and wound in a TIL-P former, thus delivering high linear displacement. The 2 Ω + 2 Ω DVC impedance configuration improves versatility to match any amplifier system. The air cooling and decompression system avoids the need for a centre hole on the bottom plate with three advantages:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBetter thermal inertia to ensure low operating temperatures during musical transients;\u003c\/li\u003e\n\u003cli\u003eMaximization of the magnetic field induced to the coil with the same overall motor dimensions. Thanks to a greater amount of iron in the pole the likelihood of magnetic saturation decreases exploiting the maximum flux density generated from the magnet;\u003c\/li\u003e\n\u003cli\u003ePossibility to install the subwoofer right on the box wall, taking full advantage of its minimal dimensions. A damping rubber disk, provided with the product, secures the subwoofer to the box and ensures air exchange for the 10 vents on the bottom.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe holes behind the voice coil winding and the 10 vents on the bottom plate ensure greater air exchange to the coil inner layers and work in synergy with an innovative assembly system. It forces the air to pass through the air gap to keep the coil operating temperature low, even with the most extreme musical programs. The terminal uses solid push connectors with an antishort circuit cover accepting cables up to 8 AWG to provide ultra-low wiring resistance in low impedance configurations (1ohm).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eErgonomic, compact design, specifically developed for sealed box enclosures starting at 27 lt volume.\u003c\/li\u003e\n\u003cli\u003eCCAW, 65 mm (2,5”) 4-layer voice coil, capable of handling 1200 W musical power. The 2 Ω + 2 Ω DVC impedance configuration improves versatility to match any amplifier system.\u003c\/li\u003e\n\u003cli\u003eVoice coil wound on TIL-P material with venting holes behind the winding. This combines efficient heat dissipation with a high Qms factor (low mechanical loss) for bursting dynamic sound.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® with optimized geometry for high cone stiffness and strong resistance to deformation even at maximum excursions.\u003c\/li\u003e\n\u003cli\u003eBoundary Free IIR rubber surround, for higher SPL performance while keeping a nominal external diameter.\u003c\/li\u003e\n\u003cli\u003eMineral-injected paper cone, for superior rigidity and damping.\u003c\/li\u003e\n\u003cli\u003eExtremely acoustically transparent anti-resonant aluminium alloy basket with six-spokes standing structure and built-in venting holes underneath the spider.\u003c\/li\u003e\n\u003cli\u003eCNC machined elegant diamond-cut basket edge featuring the Hertz logo.\u003c\/li\u003e\n\u003cli\u003eTerminal block accepting cables up to 8 AWG to provide ultra-low wiring resistance in low impedance configurations. A plastic cover prevents any accidental short-circuit.\u003c\/li\u003e\n\u003cli\u003ePossibility to secure the subwoofer to the box wall, taking full advantage of its minimal dimensions.\u003c\/li\u003e\n\u003cli\u003eHigh performance compact motor with a superior magnetic field transferred to the coil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer size:\u003c\/strong\u003e\u003cspan\u003e 300mm (12 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice Coil Ø:\u003c\/strong\u003e\u003cspan\u003e 65mm (2.5 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1200W Peak \/ 600W Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2+2\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentre to centre distance:\u003c\/strong\u003e\u003cspan\u003e 302mm (11.89 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet size:\u003c\/strong\u003e\u003cspan\u003e 164.5mm x 75mm x 35mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal driver displacement:\u003c\/strong\u003e\u003cspan\u003e 3.6 L (0.06 cu in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole diameter:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5.5mm (0.22 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one speaker:\u003c\/strong\u003e\u003cspan\u003e 8.63kg (19.03 lb)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh density flux ferrite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePressed-pulp cone with mineral powders\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXmech:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e±26mm (1.02 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFurther Information\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-PRO_MP-300_D2_TechSheet.pdf\" title=\"Hertz Mille Pro MP 300 D2.3 - Subwoofer - Tech Sheet\" target=\"_blank\"\u003eHertz Mille Pro MP 300 D2.3 - Subwoofer - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Hertz_Mille-Pro-sub_User_Manual_rev_D.pdf\" target=\"_blank\" title=\"Hertz Mille Pro Speakers - User Manual\" rel=\"noopener noreferrer\"\u003eHertz Mille Pro Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Subwoofer Only","offer_id":31574990487586,"sku":"HRT-MP300-D4","price":399.0,"currency_code":"GBP","in_stock":true},{"title":"with MPG Grille","offer_id":31574990520354,"sku":"HRT-MP300-D4-MPG","price":459.0,"currency_code":"GBP","in_stock":true},{"title":"with MG Grille","offer_id":31574990553122,"sku":"HRT-MP300-D4-MG","price":439.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-pro-mp300-d2-subwoofer-2.jpg?v=1652286141"},{"product_id":"hertz-mille-mpg-300-pro-speaker-grille","title":"Hertz Mille MPG 300 Pro -Speaker Grille","description":"\u003cp\u003eThe optional MPG 300 Speaker Grille for the \u003ca href=\"\/products\/hertz-mille-pro-mp-300-d2-3-subwoofer\" title=\"Hertz Mille Pro M300 D2 Subwoofer\"\u003eHertz Mille Pro M300 D2\u003c\/a\u003e \/ D4 subwoofer is made of die-cast aluminium, featuring a diamond-cut aluminium Hertz logo.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31570941378594,"sku":"8018823114608","price":89.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-pro-mpg300-speaker-grille.jpg?v=1649159918"},{"product_id":"hertz-mille-pro-mp-25-3-car-audio-tweeter-set","title":"Hertz Mille Pro MP 25.3 - Tweeters","description":"\u003cp\u003eThe Hertz Mille Pro MP 25.3 car audio tweeters, featuring a Tetolon dome and a 25 mm voice coil, provide a very wide and frequency response.\u003c\/p\u003e\n\u003cp\u003eThanks to its “Center Tuning Duct”, positioned in the center of the powerful Neodymium magnetic circuit, exchange of air between the dome and rear load chamber is ensured, fine-tuning the acoustics to perfection. The resulting very low resonance frequency is also functional for the woofer crossover point, elevating the sound stage.\u003c\/p\u003e\n\u003ch2\u003eHertz Mille Pro MP 25.3 - Product Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTetolon fiber soft dome, for a natural yet detailed reproduction of musical nuances.\u003c\/li\u003e\n\u003cli\u003e“Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion.\u003c\/li\u003e\n\u003cli\u003eHigh density flux Neodymium magnet, optimized for utmost control during high energy dynamic transients in the mid-high frequency range.\u003c\/li\u003e\n\u003cli\u003e25mm ferrofluid-cooled mobile voice coil.\u003c\/li\u003e\n\u003cli\u003eRear chamber filled with selected damping material and sized for lower Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.\u003c\/li\u003e\n\u003cli\u003eFaceplate featuring FEM (Finite Element Modeling) optimized geometry, for high linearity in off-axis installations. 7. Wide array of installation accessories, for an easy OEM integration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-PRO_MP25.pdf\" title=\"Hertz Mille Pro MP 25.3 - Tech Sheet\" target=\"_blank\"\u003eHertz Mille Pro MP 25.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Mille_PRO_Owners_Manual_revE.pdf\" title=\"Hertz Mille Pro MP 25.3 - User Manual\" target=\"_blank\"\u003eHertz Mille Pro MP 25.3 - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31571061997602,"sku":"8018823113939","price":119.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-pro-mp25-3-tweeters.jpg?v=1649936555"},{"product_id":"hertz-mille-pro-mp-70-3-car-audio-midrange-speaker-set","title":"Hertz Mille Pro MP 70.3 - Midrange Speakers","description":"\u003cp\u003eThe Hertz Mille Pro MP 70.3 car audio mid-rangespeakers featuring Neodymium double magnet inside the coil produces an enthralling mid range, perfect to combine with the powerful mid-low of the \u003ca href=\"hertz-mille-pro-mp-165-3-woofer-set\" title=\"Hertz Mille Pro MP 165P.3 Woofer\"\u003eMP 165P.3 woofer\u003c\/a\u003e as well as with the detailed high range of the \u003ca href=\"hertz-mille-pro-mp-25-3-car-audio-tweeter-set\" title=\"Hertz Mille Pro MP25.3 Tweeter\"\u003eMP25.3 tweeter\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe 20 mm coil of the Mille Pro MP 70.3 maximizes the dynamics; the V-cone® profile enhances off-axis dispersion and the Boundary Free Surround allows for a wider extension towards the low frequency range.\u003c\/p\u003e\n\u003ch2\u003eHertz Mille Pro MP 70.3 - Product Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSymmetrical dual Neodymium magnet structure specifically developed with FEM (Finite Element Modeling) simulations, for superior dynamics and control.\u003c\/li\u003e\n\u003cli\u003e20 mm CCAW double layer voice coil wound on a Polyamide former with 8 decompression holes, for exceptional power handling and compression-free reproduction.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically optimized for utmost linearity and dispersion in the mid-high frequency range.\u003c\/li\u003e\n\u003cli\u003e“Boundary Free” rubber surround, for better efficiency and wider mid-bass frequency.\u003c\/li\u003e\n\u003cli\u003eAnti-vibration rubber magnet cover, to damp spurious vibrations, removable to fit limited mounting depth installations.\u003c\/li\u003e\n\u003cli\u003eAcoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo.\u003c\/li\u003e\n\u003cli\u003eFull protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMidrange Size:\u003c\/strong\u003e 70mm (3 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice Coil Ø:\u003c\/strong\u003e 20mm (0.8 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e 100W Peak (Hi-Pass filtered @250Hz - 12 dB Oct.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 180Hz ÷ 18kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet size:\u003c\/strong\u003e 19.7mm x 0mm x 2mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentre to centre distance:\u003c\/strong\u003e 80mm (3.15 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one speaker:\u003c\/strong\u003e 0.17kg (0.37 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet:\u003c\/strong\u003e Neodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDome\/Cone:\u003c\/strong\u003e Pressed-pulp cone with cotton fibers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-PRO_MP70.pdf\" title=\"Hertz Mille Pro MP 70.3 - Midrange Speakers - Tech Sheet\" target=\"_blank\"\u003eHertz Mille Pro MP 70.3 - Midrange Speakers - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Mille_PRO_Owners_Manual_revE1.pdf\" title=\"Hertz Mille Pro Speakers - User Manual\" target=\"_blank\"\u003eHertz Mille Pro Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31573028864034,"sku":"8018823113915","price":159.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-pro-mp70-3-midrange-speakers_68f4d69d-faef-461b-8d8a-5b5d3a4b0ace.jpg?v=1649937827"},{"product_id":"hertz-mille-pro-mp-165p-3-car-audio-woofer-set","title":"Hertz Mille Pro MP 165P.3 - 6.5 Inch Woofers","description":"\u003cp\u003eThe Hertz Mille Pro MP 165P.3 car audio woofers' electro-acoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The voice coil, with a generous 14 mm height, has a nominal 3 Ω impedance in addition to an increased power handling.\u003c\/p\u003e\n\u003cp\u003eThese features provide the ability to maximally exploit the power of the Hertz HDP amplifiers as well as all the 2 Ω stable electronics. The ferrite 95 mm diameter magnet enables a +\/-4.5 mm voice coil linear excursion, ensuring utmost control at all times.\u003c\/p\u003e\n\u003cp\u003eThe Boundary Free Surround moves a bigger amount of air, and the V-cone® profile improves the offaxis dispersion, the real in-car listening condition. The sophisticated aluminium alloy basket neutralizes the undesired vibrations.\u003c\/p\u003e\n\u003ch4\u003eOptional Grille\u003c\/h4\u003e\n\u003cp\u003eOptional full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.\u003c\/p\u003e\n\u003ch2\u003eHertz Mille Pro MP 165P.3 - Product Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3 ohm nominal impedance to exploit all the amplifier’s power.\u003c\/li\u003e\n\u003cli\u003e14 mm height pure copper voice coil wound on a Polyamide former, for exceptional power handling.\u003c\/li\u003e\n\u003cli\u003e95 mm diameter magnet to maximize the control over the whole excursion.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically optimized for utmost linearity and dispersion in the mid frequency range.\u003c\/li\u003e\n\u003cli\u003e“Boundary Free” rubber surround, for improved efficiency and wider mid-bass frequency.\u003c\/li\u003e\n\u003cli\u003eLow mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo.\u003c\/li\u003e\n\u003cli\u003eOptional full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMidrange Size:\u003c\/strong\u003e\u003cspan\u003e 165\u003c\/span\u003emm (6.5 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice Coil Ø:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e25mm (1 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e\u003cspan\u003e 200\u003c\/span\u003eW Peak \/ 100W Continuous \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003cspan\u003e 3\u003c\/span\u003e\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e\u003cspan\u003e 45\u003c\/span\u003eHz ÷ 4.5kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet size:\u003c\/strong\u003e\u003cspan\u003e 95\u003c\/span\u003emm x 45mm x 17mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentre to centre distance:\u003c\/strong\u003e\u003cspan\u003e 156\u003c\/span\u003emm (6.14 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole diameter:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5mm (0.2 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one speaker:\u003c\/strong\u003e\u003cspan\u003e 1\u003c\/span\u003e.2kg (2.65 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet:\u003c\/strong\u003e\u003cspan\u003e High density flux ferrite\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDome\/Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePressed-pulp cone with cotton fibers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXmech:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e±7.5mm (0.3 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-PRO_MP165P_3_revA_EN.pdf\" title=\"Hertz Mille Pro MP 165P.3 - 6.5 Inch Woofer Set - Tech Sheet\" target=\"_blank\"\u003eHertz Mille Pro MP 165P.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Mille_PRO_Owners_Manual_revE4.pdf\" title=\"Hertz Mille Pro Speakers - User Manual\" target=\"_blank\"\u003eHertz Mille Pro Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Speaker Pair Only","offer_id":31573151580194,"sku":"HRT-ML165P.3","price":179.0,"currency_code":"GBP","in_stock":true},{"title":"with Speaker Grilles","offer_id":31573151612962,"sku":"HRT-ML165P.3-MG165","price":199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-pro-mp165p-3-woofers.jpg?v=1649936109"},{"product_id":"hertz-mille-pro-mp-165-3-woofer-set","title":"Hertz Mille Pro MP 165.3 - 6.5 Inch Woofers","description":"\u003cp\u003eThanks to the V-cone® and Boundary Free Surround technologies the Hertz Mille Pro MP 165.3 car audio woofers boast outstanding dispersion features and generate high SPL with compact dimensions, ensuring a wide low frequency response, even in cars with no space for a subwoofer.\u003c\/p\u003e\n\u003ch3\u003eOptional Grille\u003c\/h3\u003e\n\u003cp\u003eOptional full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.\u003c\/p\u003e\n\u003ch2\u003eHertz Mille Pro 165.3 - Product Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePure copper voice coil wound on a Polyamide former for high power handling combined with very low intermodulation distortion of vocals.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically optimized for utmost linearity and dispersion in the mid frequency range.\u003c\/li\u003e\n\u003cli\u003e“Boundary Free” rubber surround, for improved efficiency and wider mid-bass frequency.\u003c\/li\u003e\n\u003cli\u003eHigh density flux ferrite magnet combined with very low carbon content iron plates, for low distortion at high power levels.\u003c\/li\u003e\n\u003cli\u003eLow mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo.\u003c\/li\u003e\n\u003cli\u003eOptional full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMidrange Size:\u003c\/strong\u003e\u003cspan\u003e 165\u003c\/span\u003emm (6.5 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice Coil Ø:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e25mm (1 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e180W Peak \/ 90W Continuous \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e\u003cspan\u003e 40\u003c\/span\u003eHz ÷ 5kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet size:\u003c\/strong\u003e\u003cspan\u003e 85\u003c\/span\u003emm x 32mm x 17mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentre to centre distance:\u003c\/strong\u003e\u003cspan\u003e 156\u003c\/span\u003emm (6.14 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole diameter:\u003c\/strong\u003e 5mm (0.2 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one speaker:\u003c\/strong\u003e\u003cspan\u003e 1\u003c\/span\u003e.07kg (2.36 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet:\u003c\/strong\u003e\u003cspan\u003e High density flux ferrite\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDome\/Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePressed-pulp cone with cotton fibers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXmech:\u003c\/strong\u003e ±7mm (0.28 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca title=\"Hertz Mille Pro MP 165.3 - 6.5 Inch Woofer Set - Tech Sheet\" href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-PRO_MP165_3_revA_EN.pdf\" target=\"_blank\"\u003eHertz Mille Pro MP 165.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Hertz Mille Pro Speakers - User Manual\" href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Mille_PRO_Owners_Manual_revE2.pdf\" target=\"_blank\"\u003eHertz Mille Pro Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Speaker Pair Only","offer_id":31573110358050,"sku":"EH02-MP165","price":149.0,"currency_code":"GBP","in_stock":true},{"title":"with Speaker Grilles","offer_id":31573110390818,"sku":"EH02-MP165-MG165","price":169.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-pro-mp165-3-woofers.jpg?v=1649935518"},{"product_id":"hertz-mille-pro-mpcx-2tm-crossover","title":"Hertz Mille Pro MPCX 2TM - Crossover","description":"\u003cp\u003eThe Hertz Mille Pro MPCX 2 TM.3 car audio crossover is specifically developed for the \u003ca title=\"Hertz Mille Pro MP 70.3 Midrange\" href=\"hertz-mille-pro-mp-70-3-car-audio-midrange-speaker-set\"\u003eMille Pro MP 70.3\u003c\/a\u003e and \u003ca title=\"Hertz Mille Pro MP 25.3 Tweeters\" href=\"hertz-mille-pro-mp-25-3-car-audio-tweeter-set\"\u003eMP 25.3\u003c\/a\u003e when installed in a 3-way multi-amplification system and combined with an \u003ca title=\"Hertz Mille Pro MP 165.3 Woofer\" href=\"hertz-mille-pro-mp-165-3-woofer-set\"\u003eMP 165.3\u003c\/a\u003e\/ \u003ca title=\"Hertz Mille Pro MP 165P.3 Woofer\" href=\"hertz-mille-pro-mp-165p-3-car-audio-woofer-set\"\u003eMP 165P.3\u003c\/a\u003e woofer actively driven.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-position (0 \/ +2 dB) switch for tweeter level adjustments, to fine-tune the transducers emission.\u003c\/li\u003e\n\u003cli\u003e160V extremely high quality bi-metallized polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid\/hi-frequencies.\u003c\/li\u003e\n\u003cli\u003e1mm pure copper wire low series resistance inductors, for low dissipation losses in the mid-range section where high transient currents are demanded.\u003c\/li\u003e\n\u003cli\u003eSmall footprint design for easy installation, with top vent grille for efficient heat dissipation.\u003c\/li\u003e\n\u003cli\u003ePassive crossover specifically developed for MP 70.3 and MP 25.3 when installed in a 3-way multi-amplification system and combined with an MP 165.3\/ MP 165P.3 woofer actively driven.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMidrange Low Pass:\u003c\/strong\u003e  5.5 kHz @ - 6 dB Oct.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Hi Pass:\u003c\/strong\u003e 5.5k Hz @ -12 dB Oct.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustement:\u003c\/strong\u003e Tweeter 0 \/ +2 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 102mm x 76.5mm x 37mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.16Kg (0.35 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca title=\"Hertz Mille Pro MPCX 2TM - Crossover - Tech Sheet\" href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-PRO_MPCX-2-TM_Tech_Sheet.pdf\" target=\"_blank\"\u003eHertz Mille Pro MPCX 2TM - Crossover - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Hertz Mille Pro Speakers - User Manual\" href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Hertz_Mille_PRO_Speakers_Manual6.pdf\" target=\"_blank\"\u003eHertz Mille Pro Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":29622786916386,"sku":"EH02-MPCX2TM","price":69.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-pro-mpcx2-tm-3-crossover-2.jpg?v=1652286403"},{"product_id":"hertz-ml-power-1-d-class-mono-amplifier","title":"Hertz Mille ML Power 1 - D-Class Mono Amplifier","description":"\u003cp\u003eHertz Mille Power Amplifiers are born to fully enhance the outstanding performance of the Mille speakers. The new ADC (ADVANCED D-CLASS TECHNOLOGY) ensures pure listening pleasure while keeping a compact size with unmatched power efficiency. The heat sink, engineered with double technology, extrusion and aluminium die-casting, enables the Mille Power amplifiers to work constantly at full power without ever overheating, further maximizing thermal efficiency.\u003c\/p\u003e\n\u003cp\u003eThe Hertz Mille ML Power 1 Amplifier (1000 W – stable at 1 Ω) is perfect to drive the Mille subwoofers. The filters combination adopted for the Mille Power line is extremely flexible and ensures they can be used in any configuration. The active crossovers of MLPower 1 feature a 24 dB\/Oct. adjustable slope Lo-Pass filter to adapt to every need. The control section, protected by a removable panel, can be accessed from the top for an effortless tuning.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eADC (ADVANCED D-CLASS TECHNOLOGY) ensures hi-end acoustic response with unmatched power efficiency\u003c\/li\u003e\n\u003cli\u003eThermally optimized double extruded heat sink featuring die-cast aluminium ergonomic terminals\u003c\/li\u003e\n\u003cli\u003eStable at 1Ω to drive safely Mille subwoofers\u003c\/li\u003e\n\u003cli\u003eOptional HRC BM for subwoofer volume control\u003c\/li\u003e\n\u003cli\u003e24 dB\/Oct. continuously adjustable (50 to 500Hz) Lo-Pass filters and 24dB\/Oct. subsonic filter (18 to 40Hz)\u003c\/li\u003e\n\u003cli\u003eVariable phase control with 0–180°continuity to optimize low frequencies\u003c\/li\u003e\n\u003cli\u003eML Power IN with balanced Speaker In inputs for an increased noise rejection and RCA In\u003c\/li\u003e\n\u003cli\u003eOperating status real time monitoring through 4 LEDs\u003c\/li\u003e\n\u003cli\u003ePre-out full range outputs also available with Speaker In inputs\u003c\/li\u003e\n\u003cli\u003eART™ (Automatic Remote Turn On-Off)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnologies\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eADVANCED D-CLASS TECHNOLOGY\u003c\/strong\u003e - Ensures pure listening pleasure while keeping a compact size with unmatched power efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLEDS STATUS DISPLAY\u003c\/strong\u003e - It monitors the amplifiers operating status in real time pointing out possible faults such as overheating, excessive loads on the outputs or short-circuits on cables or loudspeakers. This information allows the user to identify possible issues with the installation and to intervene before the amplifier goes into protection to prevent any damages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDP IN \u0026amp; ART(TM)\u003c\/strong\u003e - The ML Power IN module features a Speaker In input (with balanced circuitry minimizing noise) for OEM head units and an RCA IN input for aftermarket sources. When the Speaker In is used, the ART™ function (Automatic Remote Turn On-Off) is enabled, managing the amplifier remote turn on to avoid unpleasant “bumps”.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADVANCED HEATSINK\u003c\/strong\u003e - The heat sink, engineered with double technology, extrusion and aluminium die-casting, enables the Mille Power amplifiers to work constantly at full power without ever overheating, further maximizing thermal efficiency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChannel Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cb\u003eOutput Power (RMS)\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e@ 14.4 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1 Ch 600 W x 1 (4Ω)\u003cbr\u003e1 Ch 1000 W x 1 (2Ω)\u003cbr\u003e1 Ch 1000 W x 1 (1Ω)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cb\u003eFilters\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eBypass\u003cbr\u003e\u003cbr\u003eLo-Pass\u003cbr\u003e\u003cbr\u003eSubsonic\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYes\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e40 ÷ 500 Hz @ 24 dB\/Oct.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e18 ÷ 40 Hz @ 24 dB\/Oct.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cb\u003eDistortion - THD\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e(100Hz @ 4Ω)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e0.08 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cb\u003eS\/N Ratio\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e(A weighted @ 1V)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e105 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cb\u003eDamping factor\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e(100Hz @ 4Ω)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cb\u003eSize W x D x H\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e170 x 349 x 46.70 (6.69 x 13.74 x 1.84)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-POWER_MLPower1_Tech_Sheet1.1.pdf\" title=\"Hertz Mille ML Power 1 - D-Class Mono Amplifier - Tech Sheet\" target=\"_blank\"\u003eHertz Mille ML Power 1 - D-Class Mono Amplifier - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Hertzaudio_ML-Power-1_User_Manual_rev1.0c.pdf\" title=\"Hertz Mille ML Power 1 - D-Class Mono Amplifier - User Manual\" target=\"_blank\"\u003eHertz Mille ML Power 1 - D-Class Mono Amplifier - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":29622786949154,"sku":"HRT-MLPOW-1","price":549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-power-mlp1-amplifier.jpg?v=1652283208"},{"product_id":"hertz-ml-power-4-d-class-4-channel-amplifier","title":"Hertz Mille ML Power 4 - D-Class 4 Channel Amplifier","description":"\u003cp\u003eThis amplifier is now discontinued.\u003c\/p\u003e\n\u003cp\u003eThe Hertz Mill ML Power 4 Amplifier (4 x 250 W 2 Ω) is the obvious choice for a top level front-rear Mille system.\u003c\/p\u003e\n\u003cp\u003eThe Hertz Mille power amplifiers are born to fully enhance the outstanding performance of the Mille speakers. The new ADC (ADVANCED D-CLASS TECHNOLOGY) ensures pure listening pleasure while keeping a compact size with unmatched power efficiency. The heat sink, engineered with double technology, extrusion and aluminium die-casting, enables the Mille Power amplifiers to work constantly at full power without ever overheating, further maximising thermal efficiency.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eADC (ADVANCED D-CLASS TECHNOLOGY) ensures hi-end acoustic response with unmatched power efficiency\u003c\/li\u003e\n\u003cli\u003eThermally optimized double extruded heat sink featuring die-cast aluminium ergonomic terminals\u003c\/li\u003e\n\u003cli\u003e250 W x 4 (2Ω) RMS power boasting hi-end quality\u003c\/li\u003e\n\u003cli\u003e12 dB\/Oct. continuously adjustable (50 to 5k Hz and 80 to 3.3k Hz) active crossover featuring Lo-Pass\/Hi-Pass or Full Range settings\u003c\/li\u003e\n\u003cli\u003eSpecific A\/B Input switch, eliminates the need for RCA Y-Adapters\u003c\/li\u003e\n\u003cli\u003eML Power IN with balanced Speaker In inputs for an increased noise rejection and RCA In\u003c\/li\u003e\n\u003cli\u003eOperating status real time monitoring through 4 LEDs\u003c\/li\u003e\n\u003cli\u003ePre-out full range outputs also available with Speaker In inputs\u003c\/li\u003e\n\u003cli\u003eART™ (Automatic Remote Turn On-Off).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnologies\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eADVANCED D-CLASS TECHNOLOGY\u003c\/strong\u003e - Ensures pure listening pleasure while keeping a compact size with unmatched power efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLEDS STATUS DISPLAY\u003c\/strong\u003e - It monitors the amplifiers operating status in real time pointing out possible faults such as overheating, excessive loads on the outputs or short-circuits on cables or loudspeakers. This information allows the user to identify possible issues with the installation and to intervene before the amplifier goes into protection to prevent any damages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDP IN \u0026amp; ART(TM)\u003c\/strong\u003e - The ML Power IN module features a Speaker In input (with balanced circuitry minimizing noise) for OEM head units and an RCA IN input for aftermarket sources. When the Speaker In is used, the ART™ function (Automatic Remote Turn On-Off) is enabled, managing the amplifier remote turn on to avoid unpleasant “bumps”.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADVANCED HEATSINK\u003c\/strong\u003e - The heat sink, engineered with double technology, extrusion and aluminium die-casting, enables the Mille Power amplifiers to work constantly at full power without ever overheating, further maximizing thermal efficiency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable width=\"100%\" class=\"bold-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eChannel mode\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e4 - 3 - 2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cb\u003eOutput Power (RMS)\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e@ 14.4 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e4 Ch 150 W x 4 (4Ω)\u003cbr\u003e4 Ch 250 W x 4 (2Ω)\u003cbr\u003e3 Ch 150 W x 2 (4Ω) + 500 W x 1 (4Ω)\u003cbr\u003e3 Ch 250 W x 2 (2Ω) + 500 W x 1 (4Ω)\u003cbr\u003e2 Ch 500 W x 2 (4Ω)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cb\u003eFilters\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eBypass\u003c\/p\u003e\n\u003cp\u003eHi-Pass\u003c\/p\u003e\n\u003cp\u003eLo-Pass\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYes\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA: 50 ÷ 5k @ 12 dB\/Oct. - B: 80 ÷ 3.3k Hz @ 12 dB\/Oct.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA: 50 ÷ 5k @ 12 dB\/Oct. - B: 80 ÷ 3.3k Hz @ 12 dB\/Oct.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cb\u003eDistortion - THD\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e(100Hz @ 4Ω)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e0.08 %\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cb\u003eS\/N Ratio\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e(A weighted @ 1V)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e100 dB\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cb\u003eDamping factor\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e(100Hz @ 4Ω)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e80\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cb\u003eSize W x D x H\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e170 x 289 x 46.70 (6.69' x 11.38' x 1.84')\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-POWER_MLPower4_Tech_Sheet1.1.pdf\" title=\"Hertz Mille ML Power 4 - Tech Sheet (PDF)\" rel=\"noopener\" target=\"_blank\"\u003eHertz Mille ML Power 4 - Tech Sheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Hertzaudio_ML-Power-4_Manual_rev1.0b.pdf\" title=\"Hertz Mille ML Power 4 - User Manual (PDF)\" rel=\"noopener\" target=\"_blank\"\u003eHertz Mille ML Power 4 - User Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":29622787014690,"sku":"HRT-MLPOW-4","price":499.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-power-mlp4-amplifier.jpg?v=1652287278"},{"product_id":"hertz-ml-power-5-d-class-5-channel-amplifier","title":"Hertz Mille ML Power 5 - D-Class 5 Channel Amplifier","description":"\u003cp\u003eThe ultra-versatile Hertz Mille ML Power 5 Amplifier (100 W x 4 + 550 W 2 Ω) provides the ability to drive a Mille system including the subwoofer. The HRC BM (Hertz Remote Control Bass Management), low frequencies level remote control, is optional.\u003c\/p\u003e\n\u003cp\u003eHertz Mille power amplifiers are born to fully enhance the outstanding performance of the Mille speakers. The new ADC (ADVANCED D-CLASS TECHNOLOGY) ensures pure listening pleasure while keeping a compact size with unmatched power efficiency. The heat sink, engineered with double technology, extrusion and aluminium die-casting, enables the Mille Power amplifiers to work constantly at full power without ever overheating, further maximizing thermal efficiency.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eADC (ADVANCED D-CLASS TECHNOLOGY) ensures hi-end acoustic response with unmatched power efficiency\u003c\/li\u003e\n\u003cli\u003eThermally optimized double extruded heat sink featuring die-cast aluminium ergonomic terminals\u003c\/li\u003e\n\u003cli\u003e100 W x 4 + 550 W x 1 (2Ω) RMS power boasting hi-end quality\u003c\/li\u003e\n\u003cli\u003eOptional HRC BM for subwoofer volume control\u003c\/li\u003e\n\u003cli\u003eHighly flexible crossover system allows full range or Hi-pass 12 dB\/Oct. filter on A \u0026amp; B channels for front + rear configurations or Hi-Pass + Band-Pass on A \u0026amp; B channels for multichannel configurations and Lo-Pass 24 dB\/ Oct filter on C channel for optimal subwoofer control\u003c\/li\u003e\n\u003cli\u003e3-Channel mode switch is provided to easily set up the amplifier for high power front speaker system + subwoofer to achieve up to 200 W x 2 (4Ω) + 550 W x 1 (2 Ω).\u003c\/li\u003e\n\u003cli\u003eML Power IN with balanced Speaker In inputs for an increased noise rejection and RCA In\u003c\/li\u003e\n\u003cli\u003eOperating status real time monitoring through 4 LEDs\u003c\/li\u003e\n\u003cli\u003eFull range Pre-out also available when using Speaker Level In inputs\u003c\/li\u003e\n\u003cli\u003eART™ (Automatic Remote Turn On-Off)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnologies\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eADVANCED D-CLASS TECHNOLOGY\u003c\/strong\u003e - Ensures pure listening pleasure while keeping a compact size with unmatched power efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLEDS STATUS DISPLAY\u003c\/strong\u003e - It monitors the amplifiers operating status in real time pointing out possible faults such as overheating, excessive loads on the outputs or short-circuits on cables or loudspeakers. This information allows the user to identify possible issues with the installation and to intervene before the amplifier goes into protection to prevent any damages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDP IN \u0026amp; ART(TM)\u003c\/strong\u003e - The ML Power IN module features a Speaker In input (with balanced circuitry minimizing noise) for OEM head units and an RCA IN input for aftermarket sources. When the Speaker In is used, the ART™ function (Automatic Remote Turn On-Off) is enabled, managing the amplifier remote turn on to avoid unpleasant “bumps”.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADVANCED HEATSINK\u003c\/strong\u003e - The heat sink, engineered with double technology, extrusion and aluminium die-casting, enables the Mille Power amplifiers to work constantly at full power without ever overheating, further maximizing thermal efficiency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"bold-table\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eChannel mode\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e5 - 3\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cb\u003eOutput Power (RMS)\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e@ 14.4 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e5 Ch 70 W x 4 + 380 W x 1 (4Ω)\u003cbr\u003e5 Ch 100 W x 4 + 550 W x 1 (2Ω)\u003cbr\u003e3 Ch 200 W x 2 (4Ω) + 380 W x 1 (4Ω)\u003cbr\u003e3 Ch 200 W x 2 (4Ω) + 550 W x 1 (2Ω)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cb\u003eFilters\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHi-Pass\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLo-Pass\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBand-Pass\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eA Ch: 40 ÷ 150 Hz @ 12 dB\/Oct. - B Ch: 80 ÷ 3.3k Hz @ 12 dB\/Oct.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eC Ch: 40 ÷ 500 Hz @ 24 dB\/Oct.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA Ch: 40 ÷ 150 Hz @ 12 dB\/Oct. - 80 ÷ 3.3k Hz (LO) @ 12 dB\/Oct.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cb\u003eDistortion - THD\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e(100Hz @ 4Ω)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e0.08 %\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cb\u003eS\/N Ratio\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e(A weighted @ 1V)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e100 dB A \u0026amp; B Ch - 106 dB C Ch\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cb\u003eDamping factor\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e(100Hz @ 4Ω)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e50 A \u0026amp; B Ch - 90 C Ch\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cb\u003eSize W x D x H\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003emm (in.)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e170 x 349 x 46.70 - (6.69' x 13.74' x 1.84')\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Hertzaudio_ML-Power-5_rev1.0b.pdf\" title=\"Hertz Mille ML Power 5 - D-Class 5 Channel Amplifier - User Manual\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eHertz Mille ML Power 5 - User Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/HERTZ_Mille-POWER_MLPOWER_5_Tech_Sheet.pdf\" title=\"Hertz Mille ML Power 5 - D-Class 5 Channel Amplifier - Tech Sheet\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cspan\u003eHertz Mille ML Power 5 - Tech Sheet (PDF)\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":29622787112994,"sku":"HRT-MLPOW-5","price":629.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-mille-power-mlp5-amplifier.jpg?v=1652286748"},{"product_id":"hertz-dieci-dt-24-3-car-audio-tweeter-set","title":"Hertz Dieci DT 24.3 - Tweeters","description":"\u003cp\u003eThe Hertz Dieci DT 24 car audio tweeters optimized geometry boasts an efficient, highly linear annular acoustic lens along with a PEI membrane, selected for its high stiffness and heat-resistance.\u003c\/p\u003e\n\u003cp\u003eThe optimised structure of the neodymium tweeter offers high efficiency and linear, extended frequency response unheard of in this category. These design solutions provide the best damping with a detailed, linear sound, even at high SPL levels. Its installation is universal thanks to the supplied brackets allowing both surface mount and flush mount applications.\u003c\/p\u003e\n\u003ch2\u003eHertz Dieci DT 24.3 - Product Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e24 mm PEI dome-cone tweeter.\u003c\/li\u003e\n\u003cli\u003eHigh efficiency annular acoustic lens.\u003c\/li\u003e\n\u003cli\u003eHigh energy neodymium magnet.\u003c\/li\u003e\n\u003cli\u003eMounting accessories for external or embedded mounting included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 24mm (0.9 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e 80W Peak @ 3,5 kHz 6 dB Oct\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 3kHz ÷ 23kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 94 \u003cspan\u003edB SPL\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet:\u003c\/strong\u003e Neodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDome:\u003c\/strong\u003e PEI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one component:\u003c\/strong\u003e 0.03kg (0.07 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e Hi Pass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover cut off:\u003c\/strong\u003e 3.5 kHz @ 6 dB Oct\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca title=\"Hertz Dieci DT 24.3 - Car Audio Tweeter Set - Tech Sheet\" href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/DIECI3_TechSheet_DT-24_3.pdf\" target=\"_blank\"\u003eHertz Dieci DT 24.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Hertz Dieci Speakers - User Manual\" href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/FAL020_Esec_Owners-manual-Speaker-Dieci_rev19A_x-Web.pdf\" target=\"_blank\"\u003eHertz Dieci Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31911210647586,"sku":"HRT-DIEC-DT24","price":44.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/files\/hertz-dieci-dt-24-tweeter-set.jpg?v=1692715111"},{"product_id":"hertz-dieci-dsk-130-3-car-audio-speaker-system","title":"Hertz Dieci DSK 130.3 - Component Speaker System","description":"\u003cp\u003eThe Hertz Dieci DSK 130.3 car audio system lets you realize a high quality audio system with the utmost in simplicity. The woofers employ the exclusive V-cone® profile for amazing off-axis response and detailed mid-high range. The TPU (Thermoplastic polyurethane) surround ensures linearity and reduction of unwanted resonance, even at high excursion.\u003c\/p\u003e\n\u003cp\u003eHigh-performance materials, such as the neodymium motor assembly and the PEI membrane, ensure an extended high frequency range. The passive filters are found directly on the supplied connection cables, along with a rich array of accessories increasing the install-friendliness and installation time.\u003c\/p\u003e\n\u003ch2\u003eHertz Dieci DSK 130.3 - Product Features\u003c\/h2\u003e\n\u003ch3\u003eDT 24.3 Tweeter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e24 mm PEI dome-cone tweeter.\u003c\/li\u003e\n\u003cli\u003eHigh efficiency annular acoustic lens.\u003c\/li\u003e\n\u003cli\u003eHigh energy neodymium magnet.\u003c\/li\u003e\n\u003cli\u003eMounting accessories for external or embedded mounting included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDV 130.3\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLarge motor assembly for mobile voice coil control.\u003c\/li\u003e\n\u003cli\u003ePure copper voice coil, wound on conex former, for maximum \\ lightness.\u003c\/li\u003e\n\u003cli\u003eV-cone® for best off-axis response, clear mid-high frequency detail and powerful bass.\u003c\/li\u003e\n\u003cli\u003eTPU surround, for wide excursion and resonance damping.\u003c\/li\u003e\n\u003cli\u003eDIN size basket protected by abrasion-proof dust paint.\u003c\/li\u003e\n\u003cli\u003eTin-plated, high current terminals.\u003c\/li\u003e\n\u003cli\u003eSilver-plated lead wires for maximum reliability and conductivity.\u003c\/li\u003e\n\u003cli\u003eButyl rubber protective cover, against crashes and abrasions.\u003c\/li\u003e\n\u003cli\u003eEpoxy glue for basket and motor system provides perfect coupling.\u003c\/li\u003e\n\u003cli\u003eLow carbon content plates for maximum magnetic permeability and high heat dissipation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Size:\u003c\/strong\u003e\u003cspan\u003e 130mm (5.0 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Size:\u003c\/strong\u003e\u003cspan\u003e 24mm (0.9 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e\u003cspan\u003e 120\u003c\/span\u003eW Peak - 60W Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e\u003cspan\u003e 60\u003c\/span\u003eHz ÷ 23kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e93 \u003cspan\u003edB SPL\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Size:\u003c\/strong\u003e\u003cspan\u003e 70mm x 32mm x 15mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice coil Ø:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e25mm (1.0 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Magnet:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh density flux ferrite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Magnet:\u003c\/strong\u003e Neodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWater-repellent pressed paper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Dome:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePEI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer weight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0.53kg (1.17 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter weight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0.03kg (0.07 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover weight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0.16kg (0.35 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHi Pass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover cut off:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3.5 kHz @ 12 dB Oct\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/DIECI3_TechSheet_DSK-130_3.pdf\" title=\"Hertz Dieci DSK 130.3 - Car Audio Speaker System - Tech Sheet\" target=\"_blank\"\u003eHertz Dieci DSK 130.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/FAL020_Esec_Owners-manual-Speaker-Dieci_rev19A_x-Web-10.pdf\" title=\"Hertz Dieci Speakers - User Manual\" target=\"_blank\"\u003eHertz Dieci Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31913962831906,"sku":"HRT-DIEC-DSK130","price":119.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/files\/hertz-dieci-dsk-130-3-component-set.jpg?v=1692713903"},{"product_id":"hertz-dieci-dsk-160-3-car-audio-speaker-system","title":"Hertz Dieci DSK 160.3 - Component Speaker System","description":"\u003cp\u003e\u003cspan\u003eThe new Hertz Dieci DSK 160.3 two-way system includes an adaptor ring designed for installation in GM and Honda models with 6” OEM speakers and a cable with built-in crossover for the DT 24.3 tweeter, designed to save space in a OEM upgrade scenario.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eHertz Dieci DSK 160.3 - Product Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan\u003eDT 24.3 Tweeter\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e24 mm PEI dome-cone tweeter.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh efficiency annular acoustic lens.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh energy neodymium magnet.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMounting accessories for external or embedded mounting included.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eDSK 160.3\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLarge motor assembly for mobile voice coil control.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePure copper voice coil, wound on conex former, for maximum lightness.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eV-cone® for best off-axis response, clear mid-high frequency detail and powerful bass.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTPU surround, for wide excursion and resonance damping.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDIN size basket protected by abrasion-proof dust paint.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTin-plated, high current terminals.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSilver-plated lead wires for maximum reliability and conductivity.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eButyl rubber protective cover, against crashes and abrasions.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEpoxy glue for basket and motor system provides perfect coupling.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLow carbon content plates for maximum magnetic permeability and high heat dissipation.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProvided adaptor ring designed for installation in GM and Honda models with 6”.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProvided cable with built-in crossover designed to save space in a OEM upgrade scenario.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Size:\u003c\/strong\u003e\u003cspan\u003e 160mm (6 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Size:\u003c\/strong\u003e\u003cspan\u003e 24mm (0.9 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e\u003cspan\u003e 160\u003c\/span\u003eW Peak - 80W Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e\u003cspan\u003e 50\u003c\/span\u003eHz ÷ 23kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e93 \u003cspan\u003edB SPL\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Size:\u003c\/strong\u003e\u003cspan\u003e 80mm x 40mm x 15mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice coil Ø:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e25mm (1.0 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Magnet:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh density flux ferrite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Magnet:\u003c\/strong\u003e Neodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWater-repellent pressed paper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Dome:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePEI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer weight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0.73kg (1.61 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter weight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0.03kg (0.07 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover weight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0.16kg (0.35 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHi Pass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Hertz_DSK_160_3_Tech_Sheet.pdf\" title=\"Hertz Dieci DSK 160.3 - Car Audio Speaker System - Tech Sheet\" target=\"_blank\"\u003eHertz Dieci DSK 160.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/FAL020_Esec_Owners-manual-Speaker-Dieci_rev19A_x-Web-14.pdf\" title=\"Hertz Dieci Speakers - User Manual\" target=\"_blank\"\u003eHertz Dieci Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31913793323042,"sku":"HRT-DIEC-DSK160","price":119.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/files\/hertz-dieci-dsk-160-3-component-set.jpg?v=1692714013"},{"product_id":"hertz-dieci-dsk-165-3-car-audio-speaker-system","title":"Hertz Dieci DSK 165.3 - Component Speaker System","description":"\u003cp\u003eHertz Dieci DSK 165.3 car audio system lets you realize a high quality audio system with the utmost in simplicity. The woofers employ the exclusive V-cone® profile for amazing off-axis response and detailed mid-high range. The TPU (Thermoplastic polyurethane) surround ensures linearity and reduction of unwanted resonance, even at high excursion. High-performance materials, such as the neodymium motor assembly and the PEI membrane, ensure an extended high frequency range.\u003c\/p\u003e\n\u003cp\u003eThe passive filters are found directly on the supplied connection cables, along with a rich array of accessories increasing the install-friendliness and installation time.\u003c\/p\u003e\n\u003ch2\u003eHertz Dieci DSK 165.3 - Product Features\u003c\/h2\u003e\n\u003ch3\u003eDT 24.3 Tweeter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e24 mm PEI dome-cone tweeter.\u003c\/li\u003e\n\u003cli\u003eHigh efficiency annular acoustic lens.\u003c\/li\u003e\n\u003cli\u003eHigh energy neodymium magnet.\u003c\/li\u003e\n\u003cli\u003eMounting accessories for external or embedded mounting included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDSK 165.3\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLarge motor assembly for mobile voice coil control.\u003c\/li\u003e\n\u003cli\u003ePure copper voice coil, wound on conex former, for maximum lightness.\u003c\/li\u003e\n\u003cli\u003eV-cone® for best off-axis response, clear mid-high frequency detail and powerful bass.\u003c\/li\u003e\n\u003cli\u003eTPU surround, for wide excursion and resonance damping.\u003c\/li\u003e\n\u003cli\u003eDIN size basket protected by abrasion-proof dust paint.\u003c\/li\u003e\n\u003cli\u003eTin-plated, high current terminals.\u003c\/li\u003e\n\u003cli\u003eSilver-plated lead wires for maximum reliability and conductivity\u003c\/li\u003e\n\u003cli\u003eButyl rubber protective cover, against crashes and abrasions.\u003c\/li\u003e\n\u003cli\u003eEpoxy glue for basket and motor system provides perfect coupling.\u003c\/li\u003e\n\u003cli\u003eLow carbon content plates for maximum magnetic permeability and high heat dissipation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling\u003c\/strong\u003e - Peak W 160\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling\u003c\/strong\u003e - Continuous W 80\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance\u003c\/strong\u003e - 4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response\u003c\/strong\u003e - 50Hz ÷ 23kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e  93 \u003cspan\u003edB SPL\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer size:\u003c\/strong\u003e 165mm (6.5 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter size:\u003c\/strong\u003e 24mm (0.9 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer magnet:\u003c\/strong\u003e High density flux ferrite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter magnet:\u003c\/strong\u003e Neodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer cone:\u003c\/strong\u003e Water-repellent pressed paper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter dome:\u003c\/strong\u003e PEI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover type:\u003c\/strong\u003e Hi Pass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover cut off:\u003c\/strong\u003e 3.5 kHz @ 12 dB Oct.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/DIECI3_TechSheet_DSK-165_3.pdf\" title=\"Hertz Dieci DSK 165.3 - Car Audio Speaker System - Tech Sheet\" target=\"_blank\"\u003eHertz Dieci DSK 165.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/FAL020_Esec_Owners-manual-Speaker-Dieci_rev19A_x-Web-11.pdf\" title=\"Hertz Dieci Speakers - User Manual\" target=\"_blank\"\u003eHertz Dieci Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31600816521250,"sku":"HRT-DSK-165-3","price":119.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/files\/hertz-dieci-dsk-165-3-component-set.jpg?v=1692714115"},{"product_id":"hertz-dieci-dsk-170-3-car-audio-speaker-system","title":"Hertz Dieci DSK 170.3 - Car Audio Speaker System","description":"\u003cp\u003eThe Hertz Dieci DSK 170.3 car audio systems lets you realize a high quality audio system with the utmost in simplicity. The woofers employ the exclusive V-cone® profile for amazing off-axis response and detailed mid-high range. The TPU (Thermoplastic polyurethane) surround ensures linearity and reduction of unwanted resonance, even at high excursion.\u003c\/p\u003e\n\u003cp\u003eHigh-performance materials, such as the neodymium motor assembly and the PEI membrane, ensure an extended high frequency range. The passive filters are found directly on the supplied connection cables, along with a rich array of accessories increasing the install-friendliness and installation time.\u003c\/p\u003e\n\u003ch2\u003eHertz Dieci DSK 170.3 - Product Features\u003c\/h2\u003e\n\u003ch3\u003eDT 24.3 Tweeter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e24 mm PEI dome-cone tweeter.\u003c\/li\u003e\n\u003cli\u003eHigh efficiency annular acoustic lens.\u003c\/li\u003e\n\u003cli\u003eHigh energy neodymium magnet.\u003c\/li\u003e\n\u003cli\u003eMounting accessories for external or embedded mounting included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDT 170.3\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLarge motor assembly for mobile voice coil control.\u003c\/li\u003e\n\u003cli\u003ePure copper voice coil, wound on conex former, for maximum lightness.\u003c\/li\u003e\n\u003cli\u003eV-cone® for best off-axis response, clear mid-high frequency detail and powerful bass.\u003c\/li\u003e\n\u003cli\u003eTPU surround, for wide excursion and resonance damping.\u003c\/li\u003e\n\u003cli\u003eDIN size basket protected by abrasion-proof dust paint.\u003c\/li\u003e\n\u003cli\u003eTin-plated, high current terminals.\u003c\/li\u003e\n\u003cli\u003eSilver-plated lead wires for maximum reliability and conductivity.\u003c\/li\u003e\n\u003cli\u003eEpoxy glue for basket and motor system provides perfect coupling.\u003c\/li\u003e\n\u003cli\u003eLow carbon content plates for maximum magnetic permeability and high heat dissipation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Size:\u003c\/strong\u003e\u003cspan\u003e 170mm (6.7 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Size:\u003c\/strong\u003e\u003cspan\u003e 24mm (0.9 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e\u003cspan\u003e 160\u003c\/span\u003eW Peak - 80W Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e\u003cspan\u003e 50\u003c\/span\u003eHz ÷ 23kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e93 \u003cspan\u003edB SPL\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Size:\u003c\/strong\u003e\u003cspan\u003e 80mm x 32mm x 10mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice coil Ø:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e25mm (1.0 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Magnet:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh density flux ferrite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Magnet:\u003c\/strong\u003e Neodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWater-repellent pressed paper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Dome:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePEI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer weight:\u003c\/strong\u003e 0.53kg (1.17 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter weight:\u003c\/strong\u003e 0.03kg (0.07 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover weight:\u003c\/strong\u003e 0.16kg (0.35 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e Hi Pass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover cut off:\u003c\/strong\u003e 3.5 kHz @ 12 dB Oct\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/DIECI3_TechSheet_DSK-170_3.pdf\" title=\"Hertz Dieci DSK 170.3 - Car Audio Speaker System - Tech Sheet\" target=\"_blank\"\u003eHertz Dieci DSK 170.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/FAL020_Esec_Owners-manual-Speaker-Dieci_rev19A_x-Web-12.pdf\" title=\"Hertz Dieci Speakers - User Manual\" target=\"_blank\"\u003eHertz Dieci Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31913595502626,"sku":"HRT-DIEC-DSK170","price":119.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/files\/hertz-dieci-dsk-170-3-component-set.jpg?v=1692714590"},{"product_id":"hertz-dieci-dcx-87-3-coaxial-speaker-set","title":"Hertz Dieci DCX 87.3 - 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz Dieci DCX 87.3 is a coaxial speaker combining a woofer made of the highest performance materials with a neodymium tweeter featuring the exclusive PEI dome.\u003c\/p\u003e\n\u003cp\u003eDespite its compact size, the Dieci DCX 87.3 features an oversized magnetic group for ultimate control, still maintaining a compact size. For those who look for a high performance two-way coax, the Dieci DCX 87.3 is able to ensure wide frequency response and excellent sound in any installation.\u003c\/p\u003e\n\u003ch2\u003eHertz Dieci DCX 87.3 - Product Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLarge motor assembly for mobile voice coil control.\u003c\/li\u003e\n\u003cli\u003ePure copper voice coil, wound on conex former, for maximum lightness.\u003c\/li\u003e\n\u003cli\u003eWater-repellent treated paper cone.\u003c\/li\u003e\n\u003cli\u003eFabric surround, for wide excursion and resonance damping.\u003c\/li\u003e\n\u003cli\u003eNeodymium tweeter with PEI dome, for compactness and energy at high frequencies.\u003c\/li\u003e\n\u003cli\u003eDIN size basket protected by abrasion-proof dust paint.\u003c\/li\u003e\n\u003cli\u003eTin-plated, high current terminals.\u003c\/li\u003e\n\u003cli\u003eSilver-plated lead wires for maximum reliability and conductivity.\u003c\/li\u003e\n\u003cli\u003eEpoxy glue for basket and motor system provides perfect coupling.\u003c\/li\u003e\n\u003cli\u003eLow carbon content plates for maximum magnetic permeability and high heat dissipation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Size:\u003c\/strong\u003e\u003cspan\u003e 87mm (3.4 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Size:\u003c\/strong\u003e\u003cspan\u003e 15\u003c\/span\u003emm (0.6 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e\u003cspan\u003e 60\u003c\/span\u003eW Peak - 30W Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e\u003cspan\u003e 130\u003c\/span\u003eHz ÷ 21kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e92 \u003cspan\u003edB SPL\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Size:\u003c\/strong\u003e\u003cspan\u003e 60mm x 24mm x 8mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice coil Ø:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e20mm (0.8 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Magnet:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh density flux ferrite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Magnet:\u003c\/strong\u003e Neodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWater-repellent pressed paper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePEI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one component:\u003c\/strong\u003e\u003cspan\u003e 0\u003c\/span\u003e.31kg (0.68 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca title=\"Hertz Dieci DCX 87.3 - 2-Way Coaxial Speaker Set - Tech Sheet\" href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/DIECI3_TechSheet_DCX-87_3.pdf\" target=\"_blank\"\u003eHertz Dieci DCX 87.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Hertz Dieci Speakers - User Manual\" href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/FAL020_Esec_Owners-manual-Speaker-Dieci_rev19A_x-Web-1.pdf\" target=\"_blank\"\u003eHertz Dieci Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31913533472802,"sku":"HRT-DIEC-DCX87","price":64.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-dieci-dcx87-3-coaxial-speakers.jpg?v=1649926043"},{"product_id":"hertz-dieci-dcx-100-3-coaxial-speaker-set","title":"Hertz Dieci DCX 100.3 - 2-Way Coaxial Speakers","description":"\u003cp\u003eTo meet all installation needs, without giving up on Hertz quality and performance, The Hertz Dieci DCX 100.3 car audio coaxials are designed with maniacal care to provide a linear frequency response and ensure high reliability.\u003c\/p\u003e\n\u003cp\u003eA Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a pressed-paper cone provide the optimum ratio between installation friendliness and sound with dynamic and emotional impact.\u003c\/p\u003e\n\u003ch2\u003eHertz Dieci DCX 100.3 - Product Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLarge motor assembly for mobile voice coil control. DCX 710.3 300 W\u003c\/li\u003e\n\u003cli\u003ePure copper voice coil, wound on conex former, for maximum lightness.\u003c\/li\u003e\n\u003cli\u003eWater-repellent treated paper cone.\u003c\/li\u003e\n\u003cli\u003eTPU surround, for wide excursion and resonance damping.\u003c\/li\u003e\n\u003cli\u003eNeodymium tweeter with PEI dome, for compactness and energy at high frequencies.\u003c\/li\u003e\n\u003cli\u003eDIN size basket protected by abrasion-proof dust paint.\u003c\/li\u003e\n\u003cli\u003eTin-plated, high current terminals.\u003c\/li\u003e\n\u003cli\u003eSilver-plated lead wires for maximum reliability and conductivity.\u003c\/li\u003e\n\u003cli\u003eButyl rubber protective cover, against crashes and abrasions.\u003c\/li\u003e\n\u003cli\u003eEpoxy glue for basket and motor system provides perfect coupling.\u003c\/li\u003e\n\u003cli\u003eLow carbon content plates for maximum magnetic permeability and high heat dissipation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Size:\u003c\/strong\u003e\u003cspan\u003e 100mm (4 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Size:\u003c\/strong\u003e\u003cspan\u003e 15\u003c\/span\u003emm (0.6 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e\u003cspan\u003e 60\u003c\/span\u003eW Peak - 30W Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e\u003cspan\u003e 70\u003c\/span\u003eHz ÷ 21kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e92 \u003cspan\u003edB SPL\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Size:\u003c\/strong\u003e\u003cspan\u003e 70mm x 32mm x 10mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice coil Ø:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e25mm (1.0 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Magnet:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh density flux ferrite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Magnet:\u003c\/strong\u003e Neodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWater-repellent pressed paper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePEI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one component:\u003c\/strong\u003e\u003cspan\u003e 0\u003c\/span\u003e.45kg (0.99 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/DIECI3_TechSheet_DCX-100_3.pdf\" title=\"Hertz Dieci DCX 100.3 - 2-Way Coaxial Speaker Set - Tech Sheet\" target=\"_blank\"\u003eHertz Dieci DCX 100.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/FAL020_Esec_Owners-manual-Speaker-Dieci_rev19A_x-Web-2.pdf\" title=\"Hertz Dieci Speakers - User Manual\" target=\"_blank\"\u003eHertz Dieci Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Speaker Pair Only","offer_id":31913497362466,"sku":"EH04-DCX100","price":64.0,"currency_code":"GBP","in_stock":true},{"title":"with Speaker Grilles","offer_id":31913497395234,"sku":"EH04-DCX101","price":76.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-dieci-dcx100-3-coaxial-speakers.jpg?v=1649866715"},{"product_id":"hertz-dieci-dcx-130-3-coaxial-speaker-set","title":"Hertz Dieci DCX 130.3 - 2-Way Coaxial Speakers","description":"\u003cp\u003eTo meet all installation needs, without giving up on Hertz quality and performance, The Hertz Dieci DCX 130.3 car audio coaxials were designed with maniacal care to provide a linear frequency response and ensure high reliability.\u003c\/p\u003e\n\u003cp\u003eA Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a pressed-paper cone provide the optimum ratio between installation friendliness and sound with dynamic and emotional impact.\u003c\/p\u003e\n\u003ch2\u003eHertz Dieci DCX 130.3 - Product Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLarge motor assembly for mobile voice coil control.\u003c\/li\u003e\n\u003cli\u003ePure copper voice coil, wound on conex former, for maximum lightness.\u003c\/li\u003e\n\u003cli\u003eWater-repellent treated paper cone.\u003c\/li\u003e\n\u003cli\u003eTPU surround, for wide excursion and resonance damping.\u003c\/li\u003e\n\u003cli\u003eNeodymium tweeter with PEI dome, for compactness and energy at high frequencies.\u003c\/li\u003e\n\u003cli\u003eDIN size basket protected by abrasion-proof dust paint.\u003c\/li\u003e\n\u003cli\u003eTin-plated, high current terminals.\u003c\/li\u003e\n\u003cli\u003eSilver-plated lead wires for maximum reliability and conductivity.\u003c\/li\u003e\n\u003cli\u003eButyl rubber protective cover, against crashes and abrasions.\u003c\/li\u003e\n\u003cli\u003eEpoxy glue for basket and motor system provides perfect coupling.\u003c\/li\u003e\n\u003cli\u003eLow carbon content plates for maximum magnetic permeability and high heat dissipation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Size:\u003c\/strong\u003e\u003cspan\u003e 130mm (5 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Size:\u003c\/strong\u003e\u003cspan\u003e 15\u003c\/span\u003emm (0.6 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e\u003cspan\u003e 80\u003c\/span\u003eW Peak - 40W Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e\u003cspan\u003e 65\u003c\/span\u003eHz ÷ 21kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e93 \u003cspan\u003edB SPL\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Size:\u003c\/strong\u003e\u003cspan\u003e 70mm x 32mm x 15mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice coil Ø:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e25mm (1.0 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Magnet:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh density flux ferrite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Magnet:\u003c\/strong\u003e Neodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWater-repellent pressed paper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePEI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one component:\u003c\/strong\u003e\u003cspan\u003e 0\u003c\/span\u003e.56kg (1.23 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca title=\"Hertz Dieci DCX 130.3 - 2-Way Coaxial Speaker Set - Tech Sheet\" href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/DIECI3_TechSheet_DCX-130_3.pdf\" target=\"_blank\"\u003eHertz Dieci DCX 130.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Hertz Dieci Speakers - User Manual\" href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/FAL020_Esec_Owners-manual-Speaker-Dieci_rev19A_x-Web-3.pdf\" target=\"_blank\"\u003eHertz Dieci Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Speaker Pair Only","offer_id":31913404137506,"sku":"HRT-DIEC-DCX130","price":69.0,"currency_code":"GBP","in_stock":true},{"title":"with Speaker Grilles","offer_id":31913404170274,"sku":"HRT-DIEC-DCX130-DG","price":82.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-dieci-dcx130-3-coaxial-speakers.jpg?v=1649866875"},{"product_id":"hertz-dieci-dcx-160-3-coaxial-speaker-set","title":"Hertz Dieci DCX 160.3 - 2-Way Coaxial Speakers","description":"\u003cp\u003e\u003cspan\u003eThe new Hertz Dieci DCX 160.3 6” coaxial includes an adaptor ring designed for installation in GM and Honda models with 6” OEM speakers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo meet all installation needs, without giving up on Hertz quality and performance, the Dieci coaxes were designed with maniacal care to provide a linear frequency response and ensure high reliability.\u003c\/p\u003e\n\u003cp\u003eA Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a pressed-paper cone provide the optimum ratio between installation friendliness and sound with dynamic and emotional impact.\u003c\/p\u003e\n\u003ch2\u003eHertz Dieci DCX 160.3 - Product Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLarge motor assembly for mobile voice coil control.\u003c\/li\u003e\n\u003cli\u003ePure copper voice coil, wound on conex former, for maximum lightness.\u003c\/li\u003e\n\u003cli\u003eWater-repellent treated paper cone.\u003c\/li\u003e\n\u003cli\u003eTPU surround, for wide excursion and resonance damping.\u003c\/li\u003e\n\u003cli\u003eNeodymium tweeter with PEI dome, for compactness and energy at high frequencies.\u003c\/li\u003e\n\u003cli\u003eDIN size basket protected by abrasion-proof dust paint.\u003c\/li\u003e\n\u003cli\u003eTin-plated, high current terminals.\u003c\/li\u003e\n\u003cli\u003eSilver-plated lead wires for maximum reliability and conductivity.\u003c\/li\u003e\n\u003cli\u003eButyl rubber protective cover, against crashes and abrasions.\u003c\/li\u003e\n\u003cli\u003eEpoxy glue for basket and motor system provides perfect coupling.\u003c\/li\u003e\n\u003cli\u003eLow carbon content plates for maximum magnetic permeability and high heat dissipation.\u003c\/li\u003e\n\u003cli\u003eProvided adaptor ring designed for installation in GM and Honda models with 6”.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Size:\u003c\/strong\u003e\u003cspan\u003e 160mm (6 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Size:\u003c\/strong\u003e\u003cspan\u003e 25\u003c\/span\u003emm (0.6 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e\u003cspan\u003e 120\u003c\/span\u003eW Peak - 60W Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e\u003cspan\u003e 50\u003c\/span\u003eHz ÷ 21kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e93 \u003cspan\u003edB SPL\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Size:\u003c\/strong\u003e\u003cspan\u003e 80mm x 40mm x 15mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice coil Ø:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e25mm (1.0 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Magnet:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh density flux ferrite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Magnet:\u003c\/strong\u003e Neodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWater-repellent pressed paper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePEI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one component:\u003c\/strong\u003e\u003cspan\u003e 0\u003c\/span\u003e.75kg (1.65 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/Hertz_DCX160_3_Tech_Sheet.pdf\" title=\"Hertz Dieci DCX 160.3 - 2-Way Coaxial Speaker Set - Tech Sheet\" target=\"_blank\"\u003eHertz Dieci DCX 160.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/FAL020_Esec_Owners-manual-Speaker-Dieci_rev19A_x-Web-13.pdf\" title=\"Hertz Dieci Speakers - User Manual\" target=\"_blank\"\u003e\u003cspan\u003eHertz Dieci Speakers - User Manual\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31913019965474,"sku":"HRT-DIEC-DSX160","price":74.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-dieci-dcx160-3-coaxial-speakers.jpg?v=1649867330"},{"product_id":"hertz-dieci-dcx-165-3-coaxial-speaker-set","title":"Hertz Dieci DCX 165.3 - 2-Way Coaxial Speakers","description":"\u003cp\u003eTo meet all installation needs, without giving up on quality and performance, the Hertz Dieci DCX 165.3 was designed with maniacal care to provide a linear frequency response and ensure high reliability.\u003c\/p\u003e\n\u003cp\u003eA Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a pressed-paper cone provide the optimum ratio between installation friendliness and sound with dynamic and emotional impact.\u003c\/p\u003e\n\u003ch2\u003eHertz Dieci DCX 165.3 - Product Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLarge motor assembly for mobile voice coil control.\u003c\/li\u003e\n\u003cli\u003ePure copper voice coil, wound on conex former, for maximum lightness.\u003c\/li\u003e\n\u003cli\u003eWater-repellent treated paper cone.\u003c\/li\u003e\n\u003cli\u003eTPU surround, for wide excursion and resonance damping.\u003c\/li\u003e\n\u003cli\u003eNeodymium tweeter with PEI dome, for compactness and energy at high frequencies.\u003c\/li\u003e\n\u003cli\u003eDIN size basket protected by abrasion-proof dust paint.\u003c\/li\u003e\n\u003cli\u003eTin-plated, high current terminals.\u003c\/li\u003e\n\u003cli\u003eSilver-plated lead wires for maximum reliability and conductivity.\u003c\/li\u003e\n\u003cli\u003eButyl rubber protective cover, against crashes and abrasions.\u003c\/li\u003e\n\u003cli\u003eEpoxy glue for basket and motor system provides perfect coupling.\u003c\/li\u003e\n\u003cli\u003eLow carbon content plates for maximum magnetic permeability and high heat dissipation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Size:\u003c\/strong\u003e\u003cspan\u003e 165mm (6.5 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Size:\u003c\/strong\u003e\u003cspan\u003e 15\u003c\/span\u003emm (0.6 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e\u003cspan\u003e 120\u003c\/span\u003eW Peak - 60W Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e\u003cspan\u003e 60\u003c\/span\u003eHz ÷ 21kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e93 \u003cspan\u003edB SPL\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Size:\u003c\/strong\u003e\u003cspan\u003e 80mm x 40mm x 15mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice coil Ø:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e25mm (1.0 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Magnet:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh density flux ferrite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Magnet:\u003c\/strong\u003e Neodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWater-repellent pressed paper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePEI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one component:\u003c\/strong\u003e\u003cspan\u003e 0\u003c\/span\u003e.77kg (1.69 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/DIECI3_TechSheet_DCX-165_3.pdf\" title=\"Hertz Dieci DCX 165.3 - 2-Way Coaxial Speaker Set - Tech Sheet\" target=\"_blank\"\u003eHertz Dieci DCX 165.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/FAL020_Esec_Owners-manual-Speaker-Dieci_rev19A_x-Web-4.pdf\" title=\"Hertz Dieci Speakers - User Manual\" target=\"_blank\"\u003eHertz Dieci Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Speaker Pair Only","offer_id":31912214134818,"sku":"EH04-DCX165","price":74.0,"currency_code":"GBP","in_stock":true},{"title":"with Speaker Grilles","offer_id":31912214167586,"sku":"EH04-DCX165-DG","price":91.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-dieci-dcx165-3-coaxial-speakers.jpg?v=1649924673"},{"product_id":"hertz-dieci-dcx-170-3-coaxial-speaker-set","title":"Hertz Dieci DCX 170.3 - 2-Way Coaxial Speakers","description":"\u003cp\u003eWith its 51 mm (2.0 in.) maximum depth the Hertz Dieci DCX 170.3 is a “flat” car audio coaxial optimised for installation in a vehicle’s door and\/or other reduced spaces, without giving up on acoustic reproduction quality.\u003c\/p\u003e\n\u003cp\u003eA Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround, a copper voice coil wound on a conex former and painstaking care in its build ensures performance surpassing other components within the same category.\u003c\/p\u003e\n\u003ch2\u003eHertz Dieci DCX 170.3 - Product Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShallow profile for an easy replacement of factory speakers.\u003c\/li\u003e\n\u003cli\u003ePure copper voice coil, wound on conex former, for maximum lightness.\u003c\/li\u003e\n\u003cli\u003eWater-repellent treated paper cone.\u003c\/li\u003e\n\u003cli\u003eTPU surround, for wide excursion and resonance damping.\u003c\/li\u003e\n\u003cli\u003eNeodymium tweeter with PEI dome, for compactness and energy at high frequencies.\u003c\/li\u003e\n\u003cli\u003eDIN size basket protected by abrasion-proof dust paint.\u003c\/li\u003e\n\u003cli\u003eTin-plated, high current terminals.\u003c\/li\u003e\n\u003cli\u003eSilver-plated lead wires for maximum reliability and conductivity.\u003c\/li\u003e\n\u003cli\u003eEpoxy glue for basket and motor system provides perfect coupling.\u003c\/li\u003e\n\u003cli\u003eLow carbon content plates for maximum magnetic permeability and high heat dissipation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Size:\u003c\/strong\u003e\u003cspan\u003e 170mm (6.7 in)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Size:\u003c\/strong\u003e\u003cspan\u003e 15\u003c\/span\u003emm (0.6 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e\u003cspan\u003e 100\u003c\/span\u003eW Peak - 50W Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e\u003cspan\u003e 60\u003c\/span\u003eHz ÷ 21kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e93 \u003cspan\u003edB SPL\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Size:\u003c\/strong\u003e\u003cspan\u003e 80mm x 32mm x 10mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice coil Ø:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e25mm (1.0 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Magnet:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh density flux ferrite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Magnet:\u003c\/strong\u003e Neodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWater-repellent pressed paper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePEI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one component:\u003c\/strong\u003e\u003cspan\u003e 0\u003c\/span\u003e.56kg (1.23 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/DIECI3_TechSheet_DCX-170_3.pdf\" title=\"Hertz Dieci DCX 170.3 - 2-Way Coaxial Speaker Set - Tech Sheet\" target=\"_blank\"\u003eHertz Dieci DCX 170.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/FAL020_Esec_Owners-manual-Speaker-Dieci_rev19A_x-Web-5.pdf\" title=\"Hertz Dieci Speakers - User Manual\" target=\"_blank\"\u003eHertz Dieci Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31912104067106,"sku":"HRT-DIEC-DCX170","price":74.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-dieci-dcx170-3-coaxial-speakers.jpg?v=1649925158"},{"product_id":"hertz-dieci-dcx-460-3-coaxial-elliptical-speaker-set","title":"Hertz Dieci DCX 460.3 - 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz Dieci DCX 460.3 features a neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a copper mobile voice coil wound on conex former. An extremely light, yet stiff structure ensures linear frequency response and a high sensitivity level.\u003c\/p\u003e\n\u003ch2\u003eHertz Dieci DCX 460.3 - Product Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLarge motor assembly for mobile voice coil control.\u003c\/li\u003e\n\u003cli\u003ePure copper voice coil, wound on conex former, for maximum lightness.\u003c\/li\u003e\n\u003cli\u003eWater-repellent treated paper cone.\u003c\/li\u003e\n\u003cli\u003eTPU surround, for wide excursion and resonance damping.\u003c\/li\u003e\n\u003cli\u003eNeodymium tweeter with PEI dome, for compactness and energy at high frequencies.\u003c\/li\u003e\n\u003cli\u003eDIN size basket protected by abrasion-proof dust paint.\u003c\/li\u003e\n\u003cli\u003eTin-plated, high current terminals.\u003c\/li\u003e\n\u003cli\u003eSilver-plated lead wires for maximum reliability and conductivity.\u003c\/li\u003e\n\u003cli\u003eEpoxy glue for basket and motor system provides perfect coupling.\u003c\/li\u003e\n\u003cli\u003eLow carbon content plates for maximum magnetic permeability and high heat dissipation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Size:\u003c\/strong\u003e\u003cspan\u003e 4\u003c\/span\u003e x 6 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Size:\u003c\/strong\u003e\u003cspan\u003e 15\u003c\/span\u003emm (0.6 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e\u003cspan\u003e 80\u003c\/span\u003eW Peak - 40W Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e\u003cspan\u003e 65\u003c\/span\u003eHz ÷ 21kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e93 \u003cspan\u003edB SPL\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Size:\u003c\/strong\u003e\u003cspan\u003e 80mm x 32mm x 10mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice coil Ø:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e25mm (1.0 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Magnet:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh density flux ferrite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Magnet:\u003c\/strong\u003e Neodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWater-repellent pressed paper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePEI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one component:\u003c\/strong\u003e\u003cspan\u003e 0\u003c\/span\u003e.58kg (1.28 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/DIECI3_TechSheet_DCX-460_3.pdf\" title=\"Hertz Dieci DCX 460.3 - 2-Way Coaxial Speaker Set - Tech Sheet\" target=\"_blank\"\u003eHertz Dieci DCX 460.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/FAL020_Esec_Owners-manual-Speaker-Dieci_rev19A_x-Web-6.pdf\" title=\"Hertz Dieci Speakers - User Manual\" target=\"_blank\"\u003eHertz Dieci Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31911731953698,"sku":"EH04-DCX460","price":74.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-dieci-dcx460-3-coaxial-speakers.jpg?v=1649925512"},{"product_id":"hertz-dieci-dcx-570-3-coaxial-elliptical-speaker-set","title":"Hertz Dieci DCX 570.3 - 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz Dieci DCX 570.3 features a neodymium magnet, PEI dome tweeter, -builtin crossover, TPU (Thermoplastic polyurethane) surround and a copper mobile voice coil wound on conex former. An extremely light, yet stiff structure ensures linear frequency response and a high sensitivity level.\u003c\/p\u003e\n\u003ch2\u003eHertz Dieci DCX 570.3 - Product Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLarge motor assembly for mobile voice coil control.\u003c\/li\u003e\n\u003cli\u003ePure copper voice coil, wound on conex former, for maximum lightness.\u003c\/li\u003e\n\u003cli\u003eWater-repellent treated paper cone.\u003c\/li\u003e\n\u003cli\u003eTPU surround, for wide excursion and resonance damping.\u003c\/li\u003e\n\u003cli\u003eNeodymium tweeter with PEI dome, for compactness and energy at high frequencies.\u003c\/li\u003e\n\u003cli\u003eDIN size basket protected by abrasion-proof dust paint.\u003c\/li\u003e\n\u003cli\u003eTin-plated, high current terminals.\u003c\/li\u003e\n\u003cli\u003eSilver-plated lead wires for maximum reliability and conductivity.\u003c\/li\u003e\n\u003cli\u003eButyl rubber protective cover, against crashes and abrasions.\u003c\/li\u003e\n\u003cli\u003eEpoxy glue for basket and motor system provides perfect coupling.\u003c\/li\u003e\n\u003cli\u003eLow carbon content plates for maximum magnetic permeability and high heat dissipation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Size:\u003c\/strong\u003e\u003cspan\u003e 5\u003c\/span\u003e x 7 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Size:\u003c\/strong\u003e\u003cspan\u003e 15\u003c\/span\u003emm (0.6 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e\u003cspan\u003e 120\u003c\/span\u003eW Peak - 60W Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e\u003cspan\u003e 60\u003c\/span\u003eHz ÷ 21kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e93 \u003cspan\u003edB SPL\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Size:\u003c\/strong\u003e\u003cspan\u003e 80mm x 40mm x 15mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice coil Ø:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e25mm (1.0 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Magnet:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh density flux ferrite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Magnet:\u003c\/strong\u003e Neodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWater-repellent pressed paper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Cone:\u003c\/strong\u003e PEI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one component:\u003c\/strong\u003e\u003cspan\u003e 0\u003c\/span\u003e.76kg (1.67 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/DIECI3_TechSheet_DCX-570_3.pdf\" title=\"Hertz Dieci DCX 570.3 - 2-Way Coaxial Speaker Set - Tech Sheet\" target=\"_blank\"\u003eHertz Dieci DCX 570.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/FAL020_Esec_Owners-manual-Speaker-Dieci_rev19A_x-Web-7.pdf\" title=\"Hertz Dieci Speakers - User Manual\" target=\"_blank\"\u003eHertz Dieci Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31911585611810,"sku":"HRT-DIEC-DCX570","price":89.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-dieci-dcx570-3-coaxial-speakers.jpg?v=1649925680"},{"product_id":"hertz-dieci-dcx-690-3-coaxial-elliptical-speaker-set","title":"Hertz Dieci DCX 690.3 - 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz Dieci DCX 690.3 car audio coaxials uses an oversized magnetic group, TPU (Thermoplastic polyurethane) surround, a 60 mm diameter midrange and a PEI dome tweeter. The result is linearity, wide dispersion and extra-ordinary efficiency not found in traditional coax components. An involving, emotional sound, even at high SPL levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMesh Speaker Grilles Included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eHertz Dieci DCX 690.3 - Product Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLarge motor assembly for mobile voice coil control.\u003c\/li\u003e\n\u003cli\u003ePure copper voice coil, wound on conex former, for maximum lightness.\u003c\/li\u003e\n\u003cli\u003eWater-repellent treated paper cone.\u003c\/li\u003e\n\u003cli\u003eTPU surround, for wide excursion and resonance damping.\u003c\/li\u003e\n\u003cli\u003e60 mm paper tweeter with ferrite magnet.\u003c\/li\u003e\n\u003cli\u003eSupertweeter with PEI dome, for compactness and energy at high frequencies.\u003c\/li\u003e\n\u003cli\u003eDIN size basket protected by abrasion-proof dust paint.\u003c\/li\u003e\n\u003cli\u003eTin-plated, high current terminals.\u003c\/li\u003e\n\u003cli\u003eSilver-plated lead wires for maximum reliability and conductivity.\u003c\/li\u003e\n\u003cli\u003eButyl rubber protective cover, against crashes and abrasions.\u003c\/li\u003e\n\u003cli\u003eEpoxy glue for basket and motor system provides perfect coupling.\u003c\/li\u003e\n\u003cli\u003eLow carbon content plates for maximum magnetic permeability and high heat dissipation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer Size:\u003c\/strong\u003e\u003cspan\u003e 6\u003c\/span\u003e.0 x 9.0 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e60mm (2.5 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupertweeter Size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e15mm (0.6 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e\u003cspan\u003e 180\u003c\/span\u003eW Peak - 90W Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4\u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e45Hz ÷ 21kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e93 \u003cspan\u003edB SPL\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Size:\u003c\/strong\u003e\u003cspan\u003e 80mm x 40mm x 15mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice coil Ø:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e25mm (1.0 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer and Tweeter Magnet:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh density flux ferrite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer and Tweeter Cone:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWater-repellent pressed paper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupertweeter Dome:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePEI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of one component:\u003c\/strong\u003e\u003cspan\u003e 0\u003c\/span\u003e.95kg (2.09 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFurther Information\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/DIECI3_TechSheet_DCX-690_3.pdf\" title=\"Hertz Dieci DCX 690.3 - 3-Way Coaxial Speaker Set - Tech Sheet\" target=\"_blank\"\u003eHertz Dieci DCX 690.3 - Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/static.hertz-audio.com\/media\/2021\/04\/FAL020_Esec_Owners-manual-Speaker-Dieci_rev19A_x-Web-8.pdf\" title=\"Hertz Dieci Speakers - User Manual\" target=\"_blank\"\u003eHertz Dieci Speakers - User Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":31911440482338,"sku":"HRT-DIEC-DCX690","price":109.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/products\/hertz-dieci-dcx690-3-coaxial-speakers.jpg?v=1649925872"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/8588\/3938\/collections\/backup-collection-152270045218.jpg?v=1652284588","url":"https:\/\/studioincar.co.uk\/collections\/hertz\/tweeters.oembed","provider":"Studio Incar","version":"1.0","type":"link"}