This high-powered icon has made its mark over a decade-long production run, thanks to its prodigious real-world power delivery, fidelity and ruggedness.
Efficient Class D technology with a patented control circuit and JL Audio's signature R.I.P.S. power supply design ensure full power delivery (1200 W) over a wide range of load impedances and vehicle voltages.
The JL Audio Slash v3 1200/1v3 - Mono Class D Subwoofer Amplifier also boasts a very complete set of signal processing features, including a parametric bass EQ and fully variable infrasonic filter.
This amplifier features an all-black look that is pure, sexy evil, including the powder-coated cast alloy heat sink and end caps.
Technical Specifications
Rated Continuous (RMS) Power @ 14.4 V |
@ 4 Ω - 1200 W RMS x 1 @ 3 Ω - 1200 W RMS x 1 @ 2 Ω - 1200 W RMS x 1 @ 1.5 Ω - 1200 W RMS x 1 |
Rated Continuous (RMS) Power @ 12.5 V |
@ 4 Ω - 1200 W RMS x 1 @ 3 Ω - 1200 W RMS x 1 @ 2 Ω - 1200 W RMS x 1 @ 1.5 Ω - 1200 W RMS x 1 |
Frequency Response | 5 Hz - 250 Hz (+0, -1dB) |
S/N Ratio, referred to highest rated power | >95 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
S/N Ratio, referred to 1 W | >65 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
Damping Factor @ 4 Ω | >500 / 50 Hz |
Damping Factor @ 2 Ω | >250 / 50 Hz |
THD+N @ Rated Power | <0.05% @ 4 Ω |
Input Voltage Range @ RCA Inputs | Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) |
Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
Fuse Rating | 100 A (AFS, AGU or MaxiFuse™) |
Dimensions
- Height (H): 2.36 in / 60 mm
- Width (W): 19.7 in / 500 mm
- Depth (D): 9.25 in / 235 mm
Further Information
JL Audio Slash v3 1200/1v3 - Mono Class D Sub Amplifier - User Manual