This potent monoblock amplifier employs JL Audio's high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output in a very compact chassis. Don't let the small size fool you, though... this amplifier is capable of serious subwoofer power, delivering a full 600 W of continuous power into a 2 ohm load (14.4V, 1% THD).
Targeted specifically for subwoofer applications, the XD600/1v2 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz.
The JL Audio XD600/1v2 - Mono Class D Subwoofer Amplifier also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be directly controlled from the driver's seat.
This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.
|Rated Continuous (RMS) Power @ 14.4 V||
@ 4 Ω - 400 W RMS x 1
@ 3 Ω - 500 W RMS x 1
@ 2 Ω - 600 W RMS x 1
@ 1.5 Ω - N/A
|Rated Continuous (RMS) Power @ 12.5 V||
@ 4 Ω - 300 W RMS x 1
@ 3 Ω - 400 W RMS x 1
@ 2 Ω - 500 W RMS x 1
@ 1.5 Ω - N/A
|Frequency Response||7 Hz - 500 Hz (+0, -1dB)|
|S/N Ratio, referred to highest rated power||>87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)|
|S/N Ratio, referred to 1 W||>67 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)|
|Damping Factor @ 4 Ω||>1000 / 50 Hz|
|Damping Factor @ 2 Ω||>500 / 50 Hz|
|THD+N @ Rated Power||<1% @ 2 Ω per Ch.|
|Input Voltage Range @ RCA Inputs||Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)|
|Min.Copper Power / Ground Wire Gauge||4 AWG wire|
|Fuse Rating||50 A (AFS, AGU or MaxiFuse™)|
- Height (H): 2.05 in / 52 mm
- Width (W): 8.52 in / 216 mm
- Depth (D): 7.09 in / 180 mm
- Net Weight: 6.3 lb / 2.86 kg