Cyrus CDt-XR - CD Transport
The Cyrus CDt-XR CD transport, brings together years of development and building upon the legacy of Cyrus' multi award winning CD players. Housed within their iconic half-width chassis, listeners of the CDt-XR will notice a dramatic lowering of the noise floor, bringing enhanced clarity and nuanced detail to their cd collection.
Product Details
Servo Evolution
Whilst it is true that the data on a CDs is stored in ‘1s and 0s’, the way it is read, using picking up different frequencies of reflected light, has analogue elements to it. Therefore, precision engineering can improve the performance. Off-the-shelf mechanisms produce significant ‘system noise’ when the stepper motors of the mechanism are required to be used during the error correction processes when the data was not picked up on the first pass. Cyrus' "Servo-Evolution" system reduces these re-reads and corrections by around 20%, producing not only a cleaner data stream, but significantly less noise.
Internal Power Supply
The CDt-XR, like all products in the XR series, has had a complete overhaul of the power supplies to each circuit section. The power supplies are much stiffer and have enabled the Cyrus engineers to the get the remarkable SE engine to run even more quietly.
Containing Noise
Upgraded components along with intelligently designed circuits using ‘counter-current’ methodologies to reduce noise pickup are in evidence throughout the design.
The fundamental principle is that power starts at the ‘quietest’ part of the circuit, before flowing towards the ‘noiser’ sections. Less noise is therefore ‘carried’ or induced into the power paths, limiting the transmission of noise inside the product. Whilst this sounds logical, the application in practice is incredibly complex, and needs to be considered at a system-wide level. Even the geometric alignment of individual components has been optimised to facilitate the cleanest possible flow of power and musical signal.
Special Considerations
A key improvement in the CDt-XR is the re-clocking of the digital signal just before it exits the case. Although noise and timing accuracy are both carefully managed throughout the circuit, this final re-clocking ensures the absolute purity of the outbound digital signal through both the optical and coaxial connections.
It’s worth noting that whilst an integrated CD player offers exceptional value and, although the CDi-XR is as close to ideal as technology reasonably allows, the presence of a DAC circuit in the same case, means the sound can never be as ‘absolutely’ clean as that from a dedicated transport. That, coupled with the fact that the integrated and pre-amplifiers in the XR series, all have pristine on-board Gen 2 QXR DACs, means the CDt-XR is, when used with a complete Cyrus system, the connoisseur’s choice.
Technical Specifications
| Enclosure | Dimensions (WxHxD) | 215 x 75 x 365mm |
|---|---|---|
| Weight | 3.7kg |
Further Information
What is Our Return Policy?
Subject to the below exceptions,Studio Incar LTD is happy to exchange or refund your purchase within 30 days of delivery. Your refund will be credited to the original payment card on the day of request but may take up to 14 working days.
Unwanted goods must be returned in a fully re-saleable condition and any packaging must be intact. We reserve the right to refuse an exchange or full refund if goods are not returned in a re-saleable condition or are damaged. If these conditions are met we will gladly offer a replacement, exchange or refund.
Refunds on promotional goods purchased under a promotional offer will be based on the terms of the promotional price. Our 30 days returns policy is in addition to the standard 14 day returns offered by the Consumer Contact Regulations.
If for any reason you believe your product is defective please notify us immediately on 01489 578951 or via email. If your product is faulty or covered under warranty any carriage costs incurred shipping the goods back will be refunded up to the amount of £10.
Upon receipt of your order you are advised to carefully inspect the package and goods to ensure they are intact and complete, before signing for receipt of delivery. Should you find the parcel to be damaged or incomplete you must refuse delivery of the goods.
Please report any damaged or faulty items to Studio Incar within 24 hours of receipt of the goods and provide any information requested (eg photographs) within 24 hours.
If you have ordered the incorrect part or wish to return an order we will gladly exchange the product free of charge with just the carriage to pay.
How do I Return a Product?
Please follow the instructions below before returning any goods
We require all returned goods (defective, damaged, unwanted or otherwise) to be sent back to us in the original condition they were received in, with all accessories, manuals and the original packaging. Items that are being returned purely because they are no longer wanted should be returned in unopened packaging. Studio Incar retain the right to refuse a refund or charge an appropriate fee for items that are returned without original packaging and/or without accessories and manuals.
Collection Procedure
- In the event of a product failing, your first course of action should be to contact Studio Incar at info@studioincar.co.uk
- Within 6 months of purchase date: Once the fault has been established and deemed impossible to be solved on site, Studio Incar will arrange for collection of the item at cost to the customer. This will be refunded in full if the item is found to be faulty.
- Please note that if the item has a non-warrantable fault the customer will be charge for carriage both ways, parts and labour.
Our Return address is:
Returns
Studio Incar
Unit 23, Mitchell Close
Fareham
PO15 5SE
How do I Cancel an Order?
You may cancel your order (or any part of it) for any reason before dispatch, however, if your order has already been dispatched & is with the courier a restocking fee may apply.
Please email us at info@studioincar.co.uk or call 01489 578951 to cancel an order.
The products we use and sell are of the highest quality and we trust them wholeheartedly, but every now and again a product has a fault that is covered under the manufacturers warranty.
In the event of such an occurance please contact us via email at info@studioincar.co.uk to proceed with the warranty process.
Below is a list of all the Manufacturers warranty timeframes with any special instructions for extended warranties:
Alpine
- 1 Year Standard Manufacturers Warranty
Amphion
5 Years standard Manufacturers Warranty
AudioControl
- 5 Years with Installation by an Authorised Installer (Studio Incar is an Authorised Installer)
- 1 Year if you are doing your own Installation
- 2 Years if you register the product with the UK supplier
AudioLab
- 2 Years standard Manufacturers warranty
Audison
- 1 Year standard Manufacturers warranty
- 2 Years if you register the product with the UK supplier
Auralic
- 90 Days Standard Manufacturers Warranty
- 3 Years Extended Warranty - Product Registration within 30 days of Purchase
Blackvue
- 6 Months standard Manufacturers warranty
Blaupunkt
1 Year standard Manufacturers warranty
Chord Company
- Lifetime Warranty
Cyrus Audio
- 40 series - 5 Years
- XR series - 3 Years
- Classic series - 2 Years
- Turntable - 3 Years
Product Registration Here
Dynaudio
- 2 Years on Car Audio Products - No Extendable Warranty
- 2 Years standard Warranty on Home Audio Products
- up to 8 Years Extendable Warranty on Home Audio Products when you register at Dynaudio
Focal
- 1 Year Standard Manufacturers Warranty
- 2 Years Extended Warranty when registered with Focal
Hegel
- 2 Years Standard Manufacturers Warranty
Hertz
- 1 Year standard Manufacturers warranty
- 2 Years if you register the product with the UK supplier
HiFi Rose
2 Years Standard Manufacturers Warranty
iFi Audio
- 1 Year Standard Manufacturers Warranty
JL Audio
- 1 Year for Speakers and Subwoofers
- 2 Years for Amplifiers and Processors
Luxman
3 Years Standard Manufacturers Warranty
Mission
1 Year Standard Manufacturer Warranty
3 Years Extended Warranty if Registered with Mission
Ortofon
- 1 Year Standard Manufacturers Warranty
Peachtree Audio
- 2 Years Standard Manufacturers Warranty
- 3 Years Extended Warranty if Registered with Peachtree
Pro-Ject
- 2 Years Standard Manufacturers Warranty
- 3 Years Extended Warranty if Registered with Pro-Ject
Q-Acoustics
- 4 Years for Passive Loudspeakers
- 1 Year for Active Loudspeakers / Subwoofers
- 5 Years for Passive Loudspeakers if Registers with Q Acoustics
- 2 Years for Active Loudspeakers / Subwoofers if Registered with Q Acoustics
SolidSteel
- 1 Year Standard Manufacturer Warranty
Sony
- 1 Year Standard Manufacturer Warranty
Wharfedale
- 2 Years Standard Manufacturers Warranty
- 3 Years Extended Warranty if registered with Wharfedale
