Audison - Car Audio | Speakers | Amplifiers | DSP

The Audison AP 6.5P - 6.5 Inch Woofers have been designed to perform at their best in OEM placements. They combine excellent power handling and efficiency featuring a very wide...

Audison Prima ASD bypass Plug & Play harness takes the ASD module inputs/iDrive outputs and bypasses them into the HiFi/ HK(674) OEM amp inputs. For the MOST/digital HK OEM amp,...

The Audison Prima Forza AP F8.9 bit amplifier, delivering 8 x 85 W or 4 x 260 W (RMS @ 4Ω), is dedicated to OEM Integration where high power is...

The two-way Audison Prima APBMW K4E kit creates a three-dimensional sound stage and give the musical message the essential timbre accuracy.  The 100 mm (4″) midrange is provided with a...

The Audison Prima AP 6.5 Woofers feature a 32 mm pure copper voice coil, for high power handling and outstanding low frequency control. All the woofers don’t employ any filter,...

The Audison DRC MP (Digital Remote Control Multimedia Play) is compatible with all the Audison electronics featuring AC Link bus. Its slim profile along with the holder supplied with it...

The Audison ECK DRC is a kit composed of a cable and an adapter allowing a 2 m / 78.74 inch additional extension of the cable supplied with the DRC....

The Audison Prima APBX 10 AS2 active subwoofer, with a 10-inch driver, features a dedicated high performance amplification module which enhances all the passive box technologies, such as the 2S² (2 Sides /...

The Audison B-CON Bluetooth Hi-Res Interface is the only Bluetooth 5.0 player specifically designed for automotive use that has obtained the “Hi-Res Audio Wireless” certification from JAS (Japan Audio Society). The Audison...

The Audison C2O interface converts the signals coming from the coaxial digital input and from the analog AUX-IN into a TOSLINK optical digital output signal (up to 24 bit/192kHz). The...

The Audison Prima APK 165P two-way loudspeaker system, capable of handling up to 345 W peak, is the ideal combination to fully exploit the power of the AP F8.9 bit or...

The Audison Prima APBMW S8-4.2 Subwoofer has been designed with electro-acoustic parameters to maximize performance from the factory box available below the seats. The ABS plastic basket, reinforced with fiberglass, and...

Audison Prima 5 Inch Speaker Grills to fit onto the following models: Audison Prima AP5 Audison Prima APX 5 Audison Prima APK 130

The Audison Prima APBX 8 AS2 active subwoofer, with 8-inch driver, features a dedicated high performance amplification module which enhances all the passive box technologies, such as the 2S² (2 Sides / 2...

The Audison Prima AP 6.5 Ω2 woofer has been developed with 2Ω nominal impedance with the purpose of exploiting all the power made available by the AP8.9 bit amplifier capable...

The Audison Prima extension cable with Plug & Play connections allows total freedom in positioning the AP bit amplifiers. Two extension typologies are available: input only, to only send the audio signal...

Audison Prima 6.5 Inch Speaker Grills to fit onto the following models: Audison Prima AP 6.5 Audison Prima AP 6.5 - 2ohm Audison Prima APX 6.5 Audison Prima APK 165...

Audison Prima 4 Inch Speaker Grills to fit onto the following models: Audison Prima AP4 Audison Prima APX4

The Audison Prima APS 8 R was designed with the aim of providing high acoustical output even when used with lower power, for use in an 8.5 litres reflex enclosure,...

The Audison Prima AP 4 Midbass Speakers offers very extended frequency response, both in high and low frequencies, combined with high efficiency and features a 25 mm pure copper voice...

The Audison Prima AP 2 wide range speakers reproduces the entire range of mid and high frequencies and is perfect for cars of the GM, Ford and Toyota group with 50...

Originating directly from the experience of the Thesis line components, the Audison Voce AV 6.5 woofer features an aluminium basket with a great dynamic structure, a cotton-fibre paper pressed cone...

The core of the Audison VOCE AV 3.0 midrange is a powerful Neodymium magnetic group: efficiency and linearity make it an irreplaceable component to achieve a fine, yet dynamic mid...

The Audison VOCE AV 1.1 tweeter features a very light Tetolon membrane, CCAW voice coil wound on a double layer and a high density Neodymium magnet. The advanced design and...

The Audison DRC MP CAN is the new high-end remote controller designed for Forza bit DSP amplifiers and future Audison devices with a DRCC port. The white OLED display ensures excellent...

Audison are thrilled to present their latest addition to the SR series of the amplifiers – the Audison SR 6.600 6-Channel Amplifier with Hi-Res Audio Certification. This amplifier is engineered...

The Audison Forza AF M8.14 bit DSP Amplifier boasts eight high-fidelity amplified channels 90W x 8 @4Ω, 140W x 8 @2Ω* with the audiophile sound of the latest generation Audison...

The Audison Forza AF C8.14 bit amplifier with integrated DSP is equipped with 8 high power amplified channels which can be bridged. It also includes a further 6 pre-amplified DSP...

The Audison Forza AF M12.14 bit amplifier with integrated DSP is equipped with 12 high power amplified channels. These are settable in bridge mode and includes a further 2 pre-amplified...

The Audison Prima T-Harness “DCC” is the Plug & Play solution for FORD models released after 2015 to integrate Audison Prima with the factory car audio system. The battery positive is...

The Audison design team, headquartered in the Potenza Picena (Italy), spent a long time planning and perfecting the new SR line, taking full advantage of the features that the most...

The Audison design team, headquartered in the Potenza Picena (Italy), spent a long time planning and perfecting the new SR line, taking full advantage of the features that the most...