Dynaudio Emit 25C - Centre Speaker

The Dynaudio Emit 25C - Centre Speaker is essentially an Emit 30 Floorstander, turned on its side, with the mid/bass drivers placed either side of the tweeter. The drivers are the same; the crossover is the same, with a different box and port-tuning. It means you get consistency between the centre speaker and the two flanking it (whether those are Emit 10s, 20s, 30s or even 50s), along with any others you place around your listening position.

High-Quality Mid / Bass Drivers

The Dynaudio Emit 25C uses the same 14cm MSP woofers as the Emit 10 and Emit 30. MSP stands for Magnesium Silicate Polymer. It’s a material that Dynaudio has developed decades ago, and have been refining ever since its use their most legendary speakers (including Confidence, Contour, Heritage Special and many more). MSP provides exactly the right combination of weight, stiffness and damping to reproduce your music as the artist intended. Each cone is made in one piece, with an integrated dust-cap. The ‘balance ribs’ you’ll see in the centre are bonded directly to the voice-coil, so the whole mechanism moves as one piece – bringing with it immense control and detail over its sound.

The voice-coils themselves are made from lightweight aluminium wire, clad in a thin layer of copper. We’ve use aluminium here on the two-layer glass-fibre former because its weight doesn’t impede the driver’s movement. The copper layer means it can take more advantage of the magnetic energy generated by the dual-stacked ferrite magnet system. It magnifies that flux energy for more power – without sacrificing fleet-footed dynamics.

Top-End Performance

The Emit 25C has a high-performance Cerotar tweeter, along with all other Emit speakers – and the award-winning Evoke family. It’s based on the renowned Esotar Forty tweeter found in the Special Forty anniversary speaker, and features innovative technology that reduces unwanted resonance and optimises airflow. As with the Evoke, Confidence and Contour i (among others), it also has a secret innovation: the Hexis. This is a small dimpled inner dome that reduces reflections to the back of the playing surface. You’ll hear its effect in the form of incredible detail resolution: sweet, smooth treble that doesn’t fatigue your ears – even during a long listening session.

Danish Cabinet Design

Emit 25C is available in three laminate finishes: Black, White and Walnut. They’re designed to complement each other, and blend seamlessly into your living room. That’s especially important for a centre channel, where, you should be spending more time looking at the picture above it than the speaker itself.

Emit 25C is the lynchpin of your home cinema speaker system. Power, control and finesse, rolled into one compact unit.

Technical Specifications

• Sensitivity: 87dB (2.83V / 1m)
• IEC Power Handling: 180W
• Impedance: 4 Ω
• Frequency Response (± 3 dB): 53Hz – 25kHz (-6 dB 46 Hz - 35 Khz)
• Box Principle: Bass reflex rear double flared port
• Crossover: 2½-way
• Crossover Frequency: 1000 / 3500Hz
• Crossover Topology: 1st Order Tweeter / 2nd Order Woofer
• Woofer: 2x 14cm MSP
• Tweeter: Cerotar soft Dome with Helix
• Weight: 10.98kg / 24.2lb
• Dimensions (W x H x D): 550 x 170.1 x 271.5mm
• Dimensions with Feet/Grille (W x H x D): 550 x 170.1 x 284.5mm

Further Information

Dynaudio Emit 25C - User Manual