Dynaudio Evoke 30 - Floorstanding Speakers

The Dynaudio Evoke 30 - Floorstanding Speakers strike the balance between compactness and restraint, and unabashed, wide-eyed enthusiasm for music.

At the forefront is the new Cerotar 28mm precision-coated soft-dome tweeter. And it’s one of Dynaudio's most sophisticated yet.

Dynaudio's engineers plundered some of their most celebrated technologies – including ingenious airflow systems from the award-winning Esotar Forty anniversary tweeter, the precision coating found on the Contour range and the Hexis from the new Confidence series (more on that in a bit) – and combined them into a new design specifically for the Evoke family.

The Cerotar is driven by a newly-designed strontium carbonate Ferrite+ ceramic magnet system, and features the Confidence’s headline-grabbing Hexis inner dome. This ingenious little dimpled device sits right behind the soft tweeter diaphragm and reduces unwanted resonances, while smoothing out the overall frequency response. The result is sweeter treble, better detail and even more clarity – and that means you can listen into the wee hours of the morning without fatigue.

Our video review of the Dynaudio Evoke 30

The Low-Down on Woofers

The Dynaudio Evoke 30’s twin 14cm Esotec+ mid/bass drivers are made from MSP (Magnesium Silicate Polymer), a material used for Dynaudio woofer diaphragms since they started back in 1977. It provides exactly the right combination of lightness, stiffness and damping to balance the needs of powerful yet precise bass performance with clear, detailed midrange.

Each speaker cone is made from a single piece of MSP. This makes them exactly the right amount of rigid – and means far less physical distortion when they’re playing. It also gives a super-solid physical connection to the glass-fibre voice-coil former on the back (it’s glued directly under the Balance Ribs you’ll see around the centre), which means more of the coil’s motion energy is transferred to the diaphragm.

The Evoke 30's 52mm voice-coils are made from aluminium – which provides the correct mix of weight and winding height to balance bass and midrange frequencies. It gives optimum moving mass while retaining the right grip of midrange performance for a perfectly integrated performance.

Nomex spiders keep everything centred and moving the way it should, while the new Contour-derived surround allows a longer throw ratio for greater punch. And, like the Cerotar tweeter, Evoke 30’s woofers are both driven by ceramic Ferrite+ magnets for greater control, finesse and power.

In non-speaker-designer language, that means “you’ll hear your music the way it was meant to be heard”. No rough edges, nothing standing out where it shouldn’t – and nothing relegated to a supporting act when it should be headlining.

Timeless Danish Design

The Dynaudio Evoke has been created for real life. Their designers’ priority was to make the whole family look great in any listening environment. They took models and prototypes home and sat with them, went and scoured interior-design stores and specialist furniture retailers and even sniffed around real houses to gain inspiration.

The Evoke 30 is available in four fantastic finishes. Black High Gloss and White High Gloss both use a new lacquering technique that gives a gloriously deep, glass-like look. At the other end of the tactile spectrum are the lovely, natural open veneers of Walnut Wood and Blonde Wood – honest, organic and hygge.

The result is an instant classic. It’s modern, retro, timeless and cutting-edge all at once. It’s the kind of speaker your kids will eye-up expectantly when they’re leaving for university.

Technical Specifications

• Sensitivity: 88dB (2.83V/1m)
• IEC Power Handling: 200W
• Impedance: 4 Ω
• Frequency Response (±3dB): 40Hz–23kHz
• Box Principle: Bass reflex Rear Ported
• Crossover: 2.5-way
• Crossover Frequency: 1200/2300Hz
• Crossover Topology: 2nd order
• Woofer: 2x14cm MSP cone
• Tweeter: 28mm Cerotar with Hexis
• Weight: 15.5kg
• Dimensions (W x H x D): 180 x 900 x 267mm
• Dimensions with feet/grille (W x H x D): 268 x 920 x 342mm

Further Information

Dynaudio Evoke 30 - User Manual

HiFi Bundle offer available for the Dynaudio Evoke 30

At Studio Incar we offer expertly curated systems based off our personal listening experience and knowledge. These systems use components that, when combined, allow them to play to their strengths and compliment each other in the best possible way.

We are offering 10% off selected systems, when bought as a package.

Analog Based System

• Source - Pro-Ject X2 - Turntable - £1199
• Cartridge - Ortofon 2M Black - £519
• Amplifier - Peachtree PreDAC / GaN400 Amplifier - £4799
• Speakers - Dynaudio Evoke 30 - Floorstanding Speakers - £3050
• Cables - Chord RumourX - Speaker Cables - £20 per metre (bare cable)

Peachtree PreDAC - GaN400 / Pro-Ject X2 / Dynaudio Evoke 30 - HiFi Bundle - Product Link

Digital Based System

• Amplifier - Hegel H190 - Integrated Amplifier - £3400
• Speakers - Dynaudio Evoke 30 - Floorstanding Speakers £3050
• Cables - Chord RumourX - Speaker Cables - £20 per metre (bare cable)

Hegel H190 / Dynaudio Evoke 30 - HiFi Bundle - Product Link