Helix P One MK2 - Mono Amplifier

Loads of power and tremendous stability: The new Helix P ONE MK2 is the ideal performance package for any subwoofer configuration. With up to 1,800 Watts RMS @ 1 Ohm, the upgrade to our powerful mono amplifier is going to rev up any woofer while always maintaining full control due to its enormous damping factor.

High-Res Audio and a fully digital signal chain

The P ONE MK2 is designed for more than just driving subwoofers. With its particularly wide frequency range up to 40 kHz and excellent signal-to-noise ratio as well as the extremely low THD, you can expect nothing less than High-Res sound quality, making it well suited for the use as a fullrange amplifier.

Due to the newly integrated optical digital input, an interference-free and ground-isolated signal transmission in the best possible quality all the way into the amplifier is now possible. The input receives signals up to a 96 kHz sampling rate lossless via light conductor and converts them back to the analog level via a cutting-edge 32-Bit BurrBrown D/A converter. Thus, the P ONE MK2 can be perfectly combined with a Helix DSP amplifier with optical digital output, for example the HELIX P SIX DSP ULTIMATE.

Extremely high power density with particularly compact dimensions

In terms of power density, the P ONE MK2 plays in a different league. No other HELIX amplifier includes so much power into such a compact package. This unique power-to-size ratio enabled by our extraordinary efficient Class D concept, which goes hand in hand with exceptionally low heat dissipation.

Features

• High performance Class D mono amplifier with up to 1,800 Watts RMS @ 1 Ohm – a perfect match for all 2 x 2 Ohms subwoofers connected in parallel
• High-res capability thanks to an extended audio frequency response of over 40 kHz for unsurpassed sound quality
• Extremely high efficiency and low heat dissipation with minimal dimensions
• High damping factor for maximum speaker control
• Digital, optical signal input in SPDIF format including SPDIF Direct In switch for routing the digital input signal directly and losslessly to the power stage
• BurrBrown D/A signal converter of the latest generation with a resolution of 32 Bit
• Switchable Subsonic filter
• Regulated power supply with Start-Stop capability for extremely stable output power even during voltage drops
• SMD (Surface Mounted Device) manufacturing technology combines minimum space requirement with maximum reliability
• Input Mode switch to adapt the amplifier to the input signal
• Perfectly combinable with HELIX P SIX DSP ULTIMATE amplifier
  

Special Features

Start-Stop capability

The switched power supply of the HELIX P ONE MK2 assures operation even if the battery’s voltage drops down to 6 Volts during engine crank.

High-Resolution audio

The extremely wide frequency range up to 40 kHz enables lossless audio reproduction of High-Resolution audio content to provide the best possible sound in studio quality.

What's in the Box?

• 1 x Amplifier HELIX P ONE MK2
• 1 x Instruction manual

Technical Specifications

Output Power RMS

• @ 4 Ohms: 1 x 500 Watts
• @ 2 Ohms: 1 x 880 Watts
• @ 1 Ohm: 1 x 1500 Watts

Inputs

• 2 x RCA / Cinch
• 1 x Remote In
• 1 x Optical SPDIF (28 - 96 kHz)

Specs

• Amplifier technology: Class D
• Input sensitivity: RCA / Cinch 0.5 - 8.0 Volts
• Input impedance RCA / Cinch: 20 kOhms
• Outputs: 1 x Speaker output
• Signal converter for digital input: BurrBrown 32 Bit DA converter
  
• Frequency response: 21 Hz - 40 kHz
• Subsonic: 21 Hz
• Slope subsonic / lowpass: Butterworth 48 dB/Oct.
• Signal-to-noise ratio digital input: 110 dB (A-weighted)
• Signal-to-noise ratio analogue input: > 110 dB (A-weighted)
• Distortion (THD): < 0.01 %
• Damping factor: > 450
• Operating voltage: 10.5 - 17 Volts (max. 5 sec. down to 6 Volts)
• Idle current: 1500 mA
• Fuse: 4 x 30 A LP-Mini-fuse (APS)
• Power rating: DC 12 V ⎓ 160 A max.
• Additional features: Active, adjustable crossover, HDM slot, input mode switch, High-Resolution audio, Start-Stop capability
• Dimensions (H x W x D): 50 x 260 x 190 mm

Further Information

Helix P One MK2 - User Manual (PDF)