Studio Incar LogoStudio Incar LogoStudio Incar Logo
0 £0.00

HiFi Rose RA180 - Integrated Amplifier

£5,499.00

In StockIn StockOut of Stock
VAT included.

Colour: Silver

  • Silver
Back In Stock on - [19041994]
Out of Stock

visamastermaestroamerican expresspaypalapple paygoogle payshopify payklarna
Trustpilot Image

The HiFi Rose RA180 is a state-of-the-art Integrated Amplifier using the latest innovative technologies.

The RA180's Power damping and dead times we're reduced to 1/10 or less. Linearity was dramatically improved to create a near-perfect sound that transcends the boundaries between digital and analog.

The UK distributor have announced that the RA180 will be available from the 3rd week in May. We are happy to take Pre-orders on these now.

Hop over to our blog post on the new HiFi Rose RA180 for more details as we find out new information and due dates etc.

New Concept Class AD Amplifier

The amplifier has developed the Class A to AB to Class D. Class AB was developed to improve the high heat generation and low efficiency of A.

Class D has higher efficiency and higher output the AB, and also significantly improved S/N and THD characteristics compared to A and AB.

However, the sound quality has been evaluated as inferior to A/AB due to the limitations of the digital circuit.

The GaN class AD amplifier developed by HiFi ROSE has dramatically improved the problems of the existing Class D by applying innovative new materials.

Next Generation GaN FET-Applied Class AD Amplifiers

Class D amplifiers have a topology that theoretically provides a perfect linear output at 0% distortion and 100% power efficiency. In order to achieve this, the switching action requires high speed and accuracy. However, previous products were weak compared to Class A/AB in the linearity aspect due to the limitations of silicon FET, which couldn't produce a smooth and natural sound.

In the the ROSE RA180, a new material, GaN FET, was used instead of Silicon FET to solve this problem. The dead time dramatically improved to 1/10 or less, and a nearly perfect linear output was realised with a switching speed cloase to zero.

This linearity goes beyond the Class D limits and produces a smooth and natural sound, like an analog amplifier.

First Look Video of the HiFi ROSE RA180 by Studio Incar

4 Mono Amplifiers - Multi Output Configuration using Modules

The HiFi ROSE RA180 consists of two modules: one AMP module specialised for stable mid-bass and balance, and another specialised for smooth high-pitched and supertweeter areas.

Each AMP module supports 200 W (8 Ohm) and can output up to 400 W per channel. When two independent modules are connected to a speaker's high and low frequencies separatelty, the driving force can be greatly improved without being affected by a counter electro-motive force.

BTL mode combines two independent modules for rich, balanced sound.

Designed to Play up to the Super Tweeter Realm

THe human hearing range has an upper limit of 15-20kHz. So, is there any need for higher frequencies? Temporarily high trebles extend well beyond 20kHz, even in harmonious sound.

For example, trumpets have a frequency response that extends to 100 kHz, and 88.2 kHz to 192 kHz sources have a 40 kHz to 96 kHz frequency response.

The RA180 is designed with a wide frequency response range so that even high-resolution sound sources with an output range of 20 Hz to 50 kHz, 100 kHz @ -3 dB, 200 kHz @ -6 dB. Although this playability may be outside a person's hearing range, it faithfully reproduces a wide frequency range, which contributes to expressing a deep and wide sound field with the original sound.

Balanced Power Supply

The power supply that has been exclusively developed for the RA180 apples 4th generation SiC FET technology to provide high output with less heat. In addition, by using a self-developed PFC (power factor circuit), it is designed not to be affected by sudden load fluctuations.

The power supply device was developed to support a powerful damping factor of at least 200, and the high output of 1000 W is designed to produce powerful bass and soft treble.

PHONO Amplifer with Variable EQ

The purpose of the PHONO amplifier provided by the RA180 is for the recording producer to accurately reproduce the original intention. It also reproduces the original sound as it is, which is the principle of HiFi ROSE.

it is designed to respond to a variety of vinyl records with low-mid bass TURNOVER and high-frequency ROLL OFF adjustment functions.

Amplifies the very weak signal picked up by the cartridge and keep it as close as possible to the original sound. MOVING MAGNET and MOVING COIL stages are provided with a simple switch selection and EQ values corresponding to curves from various record manufacturers are provided using parts with a 0.1% tolerance.

HiFi ROSE RA180 - Front Panel - V2

Front Panel

  • Source Input Selector - Line Input x3, Balance x1, Phono x1, Supports a total of 5 external inputs. Volume is motorised and adjustable remotely.
  • Tone Control - You can control the TREBLE, BASS and BALANCE attributes.
  • Active Crossover - By removing the low frequency range, only the high frequency range is output, enable to produce a high-quality sound.
  • Main Volume - The main volume is motorised and is adjustable remotely.
  • Pure Direct - By bypassing the input signal without going through balance, tone control or active crossover, the purity of the sound quality can be improved.
  • Speaker Output Selector - Two sets of speakers can be connected and each set of speakers can be controlled by a switch.
  • Dimmer - The brightness of the light on the front panel can be adjusted in 3 levels.
  • Subsonic - Blocks the ultra-high frequency to prevent ultra-high noise from negatively affecting the speaker.
  • Attenuator - Reduce the amount of volume output to a minimum level.

HiFi Rose RA180 - Rear Panel - V2

Rear Panel

  • Circuit Breaker Recruitment - The power circuit breaker has been recruited to improve the conductivity of the input electricity, and by securing a wide passage for input electricity, the resolution of sound quality has been improved as well.
  • BTL Mode - By combining 4 mono amplifiers into 2 amplifier blocks, 400 W (8 Ohm) output per channel is supported.
  • AC Power Input - By adopting FURUTECH terminals processed with pure copper optimised for audio, it transmits the input electricity wuthout interfering with the purity.
  • Subwoofer Out - Connect with active subwoofer units to provide a rich bass listening experience.

Technical Specifications

ITEM CONDITION SPECIFICATIONS MEASUREMENT STANDARD
Amplifier Output 4 Ohms 200W x 4ch (800W)
8 Ohms 200W x 4ch (880W)
BTL Mode On 400W x 2ch (400W) 400W x 2ch
Input Sensitivity Balanced Input 2000mV 200W x 4ch
Unbalanced (Line 1, 2, 3) Input 1000mV 200W x 4ch
Phono (MC/MM) Input 5mV / 0.5mV 200W x 4ch
Impedance Input Balanced Input 44k Ohms
Unbalanced (Line 1, 2, 3) Input 47k Ohms
Phono (MM/MC) Input 47k Ohms
Bandwidth (0dBr +- 3dB / 8 Ohm) Speaker Output 10Hz - 90kHz 100W x 2ch
H/F Speaker Output 10Hz - 90kHz 100W x 2ch
Frequency Response (1W, 0 +- 1dB / 8 Ohm) Speaker Output 10Hz - 90kHz 1W x 2ch
H/F Speaker Output 10Hz - 90kHz 1W x 2ch
THD Measure Balanced and Unbalanced (Line 1, 2, 3) Input 0.005% (50W) 200W x 4ch
Damping Factor Speaker and H/F Speaker Output >150 200W x 2ch
Signal to Noise Ratio (S/N) BTL / Balanced, Unbalanced / Phono MM, MC 107dB / 105dB / 80dB (MM), 60dB (MC) 200W x 4ch
Impedance Output Speaker Output 53m Ohm 200W x 4ch
Subsonic Filter with On/Off Switch -3dB 50Hz 1W x 4ch
Tone Control with On/Off Switch Bass (100Hz) / Treble (10kHz) +- 15dB 1W x 2ch (Speaker Output)
X-Over with On/Off Switch HPF (-3dB) 600Hz - 6kHz 1W x 2ch (H/F Speaker Output)
Phono Turnover Flat
300Hz (+7.7dB @100Hz)
400Hz (+11.7dB @100Hz)
500Hz (+13dB @ 100Hz) RIAA
700Hz (+14.5db @ 100hz)
Roll-Off Flat
1.6kHz (-16dB @ 10kHz)
2.1kHz (-13.7dB @ 10kHz) RIAA
3.18kHz (-11dB @ 10kHz
3.4kHz (-8dB @ 10kHz)
6.36kHz (-5dB @ 10kHz)
Design Size 430mm x 350mm x 110mm
Weight 16.7kg
Body High Purity Aluminium
Power Power SMPS (800W) Maximum Output: 1100w
Voltage AC100-230v, 50 / 60Hz Standby Mode Power Consumption: >0.5w
Audio In / Out on Rear Trigger Trigger Voltage Can be turned On: 3.3v - 12v
Remote Control IR Input 38kHz Infrared Ray (Within 10m of operating distance)

Further Information

HiFi ROSE RA180 - Owners Manual

FREE DELIVERY

We offer Free Delivery on orders to the UK Mainland over £100.


EXPERT KNOWLEDGE

Our staff are passionate about what they do and can provide advice and assistance on your purchase.

30 DAY RETURNS

You can return any unwanted and unused item within 30 days and get a full refund.


SECURE CHECKOUT

Orders can be placed on our fully SSL-secured checkout with Debit / Credit Cards or via PayPal, Apple Pay and Google Pay. 

The products we use and sell are of the highest quality and we trust them wholeheartedly, but every now and again a product has a fault that is covered under the manufacturers warranty.

In the event of such an occurance please contact us via email at info@studioincar.co.uk to proceed with the warranty process.

Below is a list of all the Manufacturers warranty timeframes with any special instructions for extended warranties:

Amphion

  • 5 Years standard Manufacturers warranty

AudioControl

  • 5 Years with Installation by an Authorised Installer (Studio Incar is an Authorised Installer)
  • 1 Year if you are doing your own Installation
  • 2 Years if you register the product with the UK supplier

AudioLab

  • 2 Years standard Manufacturers warranty

Auralic

  • 1 Year Standard Manufacturers Warranty
  • 2 Year Extended Warranty - Product Registration within 30 days of Purchase

Audison

  • 1 Year standard Manufacturers warranty
  • 2 Years if you register the product with the UK supplier

Blackvue

  • 6 Months standard Manufacturers warranty

Blaupunkt

  • 1 Year standard Manufacturers warranty

Chord Company

  • Lifetime Warranty

Dynaudio

  • 2 Years on Car Audio Products - No Extendable Warranty
  • 2 Years standard Warranty on Home Audio Products
  • up to 8 Years Extendable Warranty on Home Audio Products when you register at Dynaudio

Focal

  • 1 Year Standard Manufacturers Warranty
  • 2 Years Extended Warranty when registered with Focal

Hegel

  • 2 Years Standard Manufacturers Warranty

Hertz

  • 1 Year standard Manufacturers warranty
  • 2 Years if you register the product with the UK supplier

HiFi Rose

  • 2 Years Standard Manufacturers Warranty

JL Audio

  • 1 Year for Speakers and Subwoofers
  • 2 Years for Amplifiers and Processors

Ortofon

  • 1 Year Standard Manufacturers Warranty

Peachtree Audio

  • 2 Years Standard Manufacturers Warranty
  • 3 Years Extended Warranty if Registered with Peachtree

Pro-Ject

  • 2 Years Standard Manufacturers Warranty
  • 3 Years Extended Warranty if Registered with Pro-Ject

Q-Acoustics

  • 4 Years for Passive Loudspeakers
  • 1 Year for Active Loudspeakers / Subwoofers
  • 5 Years for Passive Loudspeakers if Registers with Q Acoustics
  • 2 Years for Active Loudspeakers / Subwoofers if Registered with Q Acoustics

SolidSteel

  • 1 Year Standard Manufacturer Warranty

Sony

  • 1 Year Standard Manufacturer Warranty

Wharfedale

  • 2 Years Standard Manufacturers Warranty
  • 3 Years Extended Warranty if registered with Wharfedale
Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.