The JL Audio 10W6v3 10 Inch Subwoofer offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior. These combine with a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance.
The 10W6v3 is best used with amplifier power in the 200W - 600W range and is optimized to operate in a sealed enclosure with only 0.55 cu. ft. (15.6 L) of air space, or a 0.75 cu. ft. (21.2 L) ported enclosure.
Greater excursion capability and higher power handling distinguish it from our 10W3v3 10-inch Subwoofer, allowing for higher output. Dual 4 Ω voice coils permit deploying the W6v3 as a 2 Ω or 8 Ω driver.
Please note that the W6v3 is a dual voice coil driver. BOTH voice coils must be connected to the amplifier (in series or parallel) for the speaker to operate properly. To accomplish this, each W6v3 features a pair of main input connection push-terminals and four voice coil configuration tab terminals.
Technical Specifications
SUBWOOFER | 10W6v3 - 4 Ohm |
Free Air Resonance (Fs): | 30.12 Hz |
Electrical “Q” (Qes): | 0.543 |
Mechanical “Q” (Qms): | 9.228 |
Total Speaker “Q” (Qts): | 0.513 |
Equivalent Compliance (Vas): | 23.25 liters |
One-way, Linear Excursion (Xmax): | 19 mm |
Efficiency (1W/1m): | 82.7 dB SPL |
Effective Piston Area (Sd): | 0.0318 m2 |
DC Resistance (Re): | 6.452 ohm |
Nominal Impedance: | Dual 4-ohm voice coils |
Power Handling (continuous): | 600 W |