Engineered specifically for powersports applications, the JL Audio MX280/4 - 4 Channel - Class D Amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.
Generating a solid 50W x 4 into 4 ohms (14.4V, 1% THD), the MX280/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 140W x 2 into 4 ohms.
Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.
This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.
|Rated Continuous (RMS) Power @ 14.4 V||
@ 4 Ω - 50 W RMS x 4
@ 2 Ω - 70 W RMS x 4
Bridged @ 4Ω - 140 W RMS x 2
|Rated Continuous (RMS) Power @ 12.5 V||
@ 4 Ω - 36 W RMS x 4
@ 2 Ω - 52 W RMS x 4
Bridged @ 4Ω - 100 W RMS x 2
|Frequency Response||20 Hz - 20 kHz (+0, -1dB)|
|S/N Ratio, referred to highest rated power||>89.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)|
|S/N Ratio, referred to 1 W||>68 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)|
|Damping Factor @ 4 Ω||>60 / 50 Hz|
|Damping Factor @ 2 Ω||>30 / 50 Hz|
|THD+N @ Rated Power||<1% @ 2 Ω per Ch.|
|Input Voltage Range @ RCA Inputs||Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High)|
|Min.Copper Power / Ground Wire Gauge||8 AWG wire|
|Fuse Rating||35 A (AFS, AGU or MaxiFuse™)|
- Height (H): 1.77 in / 45 mm
- Width (W): 8.66 in / 220 mm
- Depth (D): 3.09 in / 78.5 mm
- Net Weight: 3.18 lb / 1.44 kg