Engineered specifically for powersports applications, the JL Audio MX500/4 - 4 Channel - Class D Amplifier employs their high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.
Generating a solid 70W x 4 into 4 ohms (14.4V, 1% THD), the MX500/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 250W x 2 into 4 ohms.
Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.
This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.
Technical Specifications
Rated Continuous (RMS) Power @ 14.4 V |
@ 4 Ω - 70 W RMS x 4 @ 2 Ω - 125 W RMS x 4 Bridged @ 4 Ω - 250 W RMS x 2 |
Rated Continuous (RMS) Power @ 12.5 V |
@ 4 Ω - 55 W RMS x 4 @ 2 Ω - 90 W RMS x 4 Bridged @ 4 Ω - 180 W RMS x 2 |
Frequency Response | 20 Hz - 20 kHz (+0, -1dB) |
S/N Ratio, referred to highest rated power | >88 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
S/N Ratio, referred to 1 W | >70.5 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
Damping Factor @ 4 Ω | >92 / 50 Hz |
Damping Factor @ 2 Ω | >43 / 50 Hz |
THD+N @ Rated Power | <1% @ 2 Ω |
Input Voltage Range @ RCA Inputs | Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High) |
Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
Fuse Rating | 50 A (AFS, AGU or MaxiFuse™) |
Dimensions
- Height (H): 1.77 in / 45 mm
- Width (W): 9.33 in / 237 mm
- Depth (D): 4.50 in / 115 mm
Further Information
JL Audio MX500/4 - 4 Channel - Class D Amplifier - User Manual