Studio Incar LogoStudio Incar LogoStudio Incar Logo
0 £0.00

Solidsteel SS-6 - Vintage Standmount Speaker Stands


In StockIn StockOut of Stock
VAT included.

Colour: Raw

  • Raw
  • Black
  • White
Back In Stock on - [19041994]
Out of Stock

apple paygoogle payklarna-pay-latermaestromasterpaypalshopify payvisa
Trustpilot Image

The Solidsteel SS-6 - Standmount Speaker Stands allows for positioning the monitor-type loudspeaker at the correct height, which is critical to their performance.

Since standmount speakers are relatively lightweight compared to floor-standing units, it is essential to maintain high stability and rigidity. As with all components, proper decoupling must also be considered.

The Solidsteel SS-6 Speaker Stands fulfil an important need regarding the proper setup and placement of monitor speakers, and must be considered as important as the units they support.

3 tubolar supports end with a crimped steel bar. The stainless steel spikes are removable to allow the frame to be filled with damping material if so desired. The top plate, made from MDF is interchangeable, ensuring a high degree of optimisation with a large number of loudspeakers.

Decoupling between the chassis and the shelf is achieved through three steel ball bearings. These unique tripods are assembled through a traditional brass welding process. The SS-6 stands are also supplied with “Pata-fix®” to properly fix the speakers to the top plate.

Technical Specifications

  • Three-leg plate in Flat Black, White & Raw finish
  • MDF top plate in Flat Black finish
  • Stainless steel vertical tubular supports with anti-resonant finish
  • Height-adjustable, stainless steel spikes
  • Weight: 12.2 Kg | 26.9 lbs
  • Finish: Black / White / Raw

Further Information

Solidsteel SS-6 - User Manual

The products we use and sell are of the highest quality and we trust them wholeheartedly, but every now and again a product has a fault that is covered under the manufacturers warranty.

In the event of such an occurance please contact us via email at to proceed with the warranty process.

Below is a list of all the Manufacturers warranty timeframes with any special instructions for extended warranties:


  • 5 Years with Installation by an Authorised Installer (Studio Incar is an Authorised Installer)
  • 1 Year if you are doing your own Installation
  • 2 Years if you register the product with the UK supplier


  • 2 Years standard Manufacturers warranty


  • 1 Year standard Manufacturers warranty
  • 2 Years if you register the product with the UK supplier


  • 6 Months standard Manufacturers warranty


  • 1 Year standard Manufacturers warranty

Chord Company

  • Lifetime Warranty


  • 2 Years on Car Audio Products - No Extendable Warranty
  • 2 Years standard Warranty on Home Audio Products
  • up to 8 Years Extendable Warranty on Home Audio Products when you register at Dynaudio


  • 1 Year Standard Manufacturers Warranty
  • 2 Years Extended Warranty when registered with Focal


  • 2 Years Standard Manufacturers Warranty


  • 1 Year standard Manufacturers warranty
  • 2 Years if you register the product with the UK supplier

HiFi Rose

  • 2 Years Standard Manufacturers Warranty

JL Audio

  • 1 Year for Speakers and Subwoofers
  • 2 Years for Amplifiers and Processors

Peachtree Audio

  • 2 Years Standard Manufacturers Warranty
  • 3 Years Extended Warranty if Registered with Peachtree


  • 2 Years Standard Manufacturers Warranty
  • 3 Years Extended Warranty if Registered with Pro-Ject


  • 4 Years for Passive Loudspeakers
  • 1 Year for Active Loudspeakers / Subwoofers
  • 5 Years for Passive Loudspeakers if Registers with Q Acoustics
  • 2 Years for Active Loudspeakers / Subwoofers if Registered with Q Acoustics


  • 1 Year Standard Manufacturer Warranty


  • 1 Year Standard Manufacturer Warranty


  • 2 Years Standard Manufacturers Warranty
Not enough items available. Only [max] left.