The three way Hertz Mille Pro MPK 163.3 car audio speaker system is dedicated to those who want the best: the Mille Pro MP 70.3 midrange featuring Neodymium double magnets inside the coil produces an enthralling mid range, perfect to combine with the powerful mid-low of the MP 165.3 woofer as well as with the detailed high range of the MP25.3 tweeter.
The 20 mm coil of the MP 70.3 maximizes the dynamics; the V-cone® profile enhances off-axis dispersion and the Boundary Free Surround allows for a wider extension towards the low frequency range.
The dedicated MPCX 3.3 crossover provides optimized crossover points to exploit the midrange remarkable extension using ultra-selected components.
Hertz Mille Pro MPK 163.3 - Product Features
MP 25.3:
- Tetolon fiber soft dome, for a natural yet detailed reproduction of musical nuances.
- “Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion.
- High density flux Neodymium magnet, optimized for utmost control during high energy dynamic transients in the mid-high frequency range.
- 25mm ferrofluid-cooled mobile voice coil.
- Rear chamber filled with selected damping material and sized for lower Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.
- Faceplate featuring FEM (Finite Element Modeling) optimized geometry, for high linearity in off-axis installations.
- Wide array of installation accessories, for an easy OEM integration.
MP 70.3:
- Symmetrical dual Neodymium magnet structure specifically developed with FEM (Finite Element Modeling) simulations, for superior dynamics and control.
- 20 mm CCAW double layer voice coil wound on a Polyamide former with 8 decompression holes, for exceptional power handling and compression-free reproduction.
- Exponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically optimized for utmost linearity and dispersion in the mid-high frequency range.
- “Boundary Free” rubber surround, for better efficiency and wider mid-bass frequency.
- Anti-vibration rubber magnet cover, to damp spurious vibrations, removable to fit limited mounting depth installations.
- Acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo.
- Full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.
MP 165.3:
- Pure copper voice coil wound on a Polyamide former for high power handling combined with very low intermodulation distortion of vocals.
- Exponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically optimized for utmost linearity and dispersion in the mid frequency range.
- “Boundary Free” rubber surround, for improved efficiency and wider mid-bass frequency.
- High density flux ferrite magnet combined with very low carbon content iron plates, for low distortion at high power levels.
- Low mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo.
- Full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.
MPCX 3.3:
- Two-position (0 / +2 dB) switch for tweeter & midrange level adjustments, to fine-tune the transducers emission according to their installation position.
- 100V extremely high quality bi-metallized polyester film capacitors in the tweeter section, for maximum sound transparency and neat hi-frequencies.
- 1mm pure copper wire low series resistance inductors, for low dissipation losses on the woofer section where high transient currents are demanded.
- Compact footprint design for easy installation, with top vent grille for efficient heat dissipation.
Technical Specifications
Size Woofer Midrange Tweeter diaphragm |
mm (in.) mm (in.) mm (in.) |
165 (6.5) 70 (3) 29 (1.14) |
Voice Coil Ø Woofer Midrange Tweeter |
mm (in.) mm (in.) mm (in.) |
25 (1) 20 (0.8) 25 (1) |
Power Handling |
W peak W continuous |
300 150 |
Sensitivity | dB SPL | 92 |
Impedance | Ω | 4 |
Frequency Response | Hz | 40 - 22.5k |
Crossover |
Woofer Midrange Tweeter |
Lo-Pass 450Hz - 6 dB Oct Band-Pass 450 ÷ 5.5k Hz - 6 dB Oct. Hi-Pass 5.5kHz - 12 dB Oct |
Adjustment |
Tweeter Level Midrange Level |
0 / +2 dB 0 / +2 dB |
Weight of one component Woofer Midrange Tweeter Crossover |
kg (lb) kg (lb) kg (lb) kg (lb) |
1.07 (2.36) 0.17 (0.37) 0.07 (0.15) 0.43 (0.95) |