Dynaudio Contour 20i - Standmount Speakers

The new Dynaudio Contour 20i has been designed to surpass every other standmount Contour model that Dynaudio have created. By the way, it succeeds.

Dynaudio is excited to take the wraps off its new Contour i series – an extensive update to the multi-award-winning 2016 Contour range.

The family has been totally overhauled under the hood with advanced acoustic technology trickled down from the flagship Confidence range. The results are plain to hear.

We are offering these with 50% off the Dynaudio Stand 20 or Stand 10's.

Dynaudio Product Manager - Otto Jørgensen Says:

We didn’t do it because we had to, we did it because we wanted to, this is what happens when you leave our engineers alone with a speaker – they can’t help but improve it. We gained so much knowledge during the Confidence project that we simply had to share it with Contour. And we’re absolutely thrilled with the results.

Contour i Series Overview - Studio Incar Blog Post

Features of the Contour 20i - What’s new?

Tweeters and Woofers

Taking it from the top, the brand-new Esotar 2i tweeter on all models gains the ingenious Hexis resonance-defeating inner dome, plus a new, larger rear chamber. Together they reduce distortion and gives a flatter frequency response.

The Contour 20i woofer gains an updated Nomex spider. It’s the same structural design as the 2016 Contour (with varying-width corrugations for finer excursion control), but the new material simply sounds better – the result of many hours of listening in Dynaudio Labs.

Crossovers

The crossovers have been updated - because of the driver tweaks providing an inherently flat frequency response, it means Dynaudio has been able to remove the impedance correction circuitry for an even simpler board. Even the internal damping is brand-new – using lessons learned from Evoke and Confidence.

The whole range was extensively optimised in Dynaudio’s world-leading Jupiter measuring facility before being subjected to countless hours of listening by the experts in Dynaudio Labs.

Finally, the finishes have been improved. The range isavailable in three finish variants, all with enhanced surface quality.

External Review

What Hi-Fi Magazine gave the Dynaudio Contour 20i a 5-Star rating. Read the Full Review HERE.

Technical Specifications

• Sensitivity: 86dB (2.83V / 1m)
• IEC Power Handling: 180W
• Impedance: 4 Ω
• Frequency Response (± 3 dB): 39Hz–23kHz
• Box Principle: Bass reflex rear ported
• Crossover: 2-way
• Crossover Frequency: 2200Hz
• Crossover Topology: 2nd order
• Woofer: 18cm MSP
• Tweeter: 28mm Esotar2i
• Weight: 14kg / 30 7/8lb
• Dimensions (W x H x D): 215x440x360mm
• Dimensions with feet/grille (W x H x D): 215 x 440 x 396mm

Further Information

Dynaudio Contour 20i - Standmount Speakers - User Manual