Free Delivery on UK orders over £100
Call us on 01489 877987
If you prefer a traditional Class A/B design taken to its highest possible level, the JL Audio Slash v3 300/4v3 - 4 Channel Class A/B Amplifier is your amplifier, thanks to its outstanding fidelity, reliability and well-designed feature set.
This classic amplifier features JL Audio's unique, and patented, Absolute Symmetry Class A/B circuit and our R.I.P.S. power supply design for full power delivery (75 W x 4) over a wide range of load impedances and vehicle voltages.
This amplifier features an all-black look that is pure, sexy evil, including the powder-coated cast alloy heat sink and end caps.
Technical Specifications
| Rated Continuous (RMS) Power @ 14.4 V |
@ 4 Ω - 75 W RMS x 4 @ 3 Ω - 75 W RMS x 4 @ 2 Ω - 75 W RMS x 4 @ 1.5 Ω - 75 W RMS x 4 Bridged @ 8 Ω - 150 W RMS x 2 Bridged @ 4 Ω - 150 W RMS x 2 |
| Rated Continuous (RMS) Power @ 12.5 V |
@ 4 Ω - 75 W RMS x 4 @ 3 Ω - 75 W RMS x 4 @ 2 Ω - 75 W RMS x 4 @ 1.5 Ω - 75 W RMS x 4 Bridged @ 8 Ω - 150 W RMS x 2 Bridged @ 4 Ω - 150 W RMS x 2 |
| Frequency Response | 5 Hz - 30 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >108.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >89.5 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ω | >300 / 50 Hz |
| THD+N @ Rated Power | <0.03% @ 4 Ω |
| Input Voltage Range @ RCA Inputs | Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) |
| Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 40 A (AFS, AGU or MaxiFuse™) |
Dimensions
- Height (H): 2.36 in / 60 mm
- Width (W): 13.40 in / 340 mm
- Depth (D): 9.25 in / 235 mm
Further Information
JL Audio Slash v3 300/4v3 - 4 Channel Class A/B Amplifier - User Manual
The products we use and sell are of the highest quality and we trust them wholeheartedly, but every now and again a product has a fault that is covered under the manufacturers warranty.
In the event of such an occurance please contact us via email at info@studioincar.co.uk to proceed with the warranty process.
Below is a list of all the Manufacturers warranty timeframes with any special instructions for extended warranties:
AudioControl
- 5 Years with Installation by an Authorised Installer (Studio Incar is an Authorised Installer)
- 1 Year if you are doing your own Installation
- 2 Years if you register the product with the UK supplier
AudioLab
- 2 Years standard Manufacturers warranty
Audison
- 1 Year standard Manufacturers warranty
- 2 Years if you register the product with the UK supplier
Blackvue
- 6 Months standard Manufacturers warranty
Blaupunkt
- 1 Year standard Manufacturers warranty
Chord Company
- Lifetime Warranty
Dynaudio
- 2 Years on Car Audio Products - No Extendable Warranty
- 2 Years standard Warranty on Home Audio Products
- up to 8 Years Extendable Warranty on Home Audio Products when you register at Dynaudio
Focal
- 1 Year Standard Manufacturers Warranty
- 2 Years Extended Warranty when registered with Focal
Hegel
- 2 Years Standard Manufacturers Warranty
Hertz
- 1 Year standard Manufacturers warranty
- 2 Years if you register the product with the UK supplier
HiFi Rose
- 2 Years Standard Manufacturers Warranty
JL Audio
- 1 Year for Speakers and Subwoofers
- 2 Years for Amplifiers and Processors
Peachtree Audio
- 2 Years Standard Manufacturers Warranty
- 3 Years Extended Warranty if Registered with Peachtree
Pro-Ject
- 2 Years Standard Manufacturers Warranty
- 3 Years Extended Warranty if Registered with Pro-Ject
Q-Acoustics
- 4 Years for Passive Loudspeakers
- 1 Year for Active Loudspeakers / Subwoofers
- 5 Years for Passive Loudspeakers if Registers with Q Acoustics
- 2 Years for Active Loudspeakers / Subwoofers if Registered with Q Acoustics
SolidSteel
- 1 Year Standard Manufacturer Warranty
Sony
- 1 Year Standard Manufacturer Warranty
Wharfedale
- 2 Years Standard Manufacturers Warranty