This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is the NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.
The JL Audio XD200/2v2 - 2 Channel Class Amplifier includes a 12 dB / octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz.
The XD200/2v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be directly controlled from the driver's seat.
This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.
|Rated Continuous (RMS) Power @ 14.4 V||
@ 4 Ω - 75 W RMS x 2
@ 2 Ω - 100 W RMS x 2
Bridged @ 4 Ω - 200 W RMS x 1
|Rated Continuous (RMS) Power @ 12.5 V||
@ 4 Ω - 60 W RMS x 2
@ 2 Ω - 90 W RMS x 2
Bridged @ 4 Ω - 180 W RMS x 1
|Frequency Response||12 Hz - 22 kHz (+0, -1dB)|
|S/N Ratio, referred to highest rated power||>104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)|
|S/N Ratio, referred to 1 W||>84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)|
|Damping Factor @ 4 Ω||>150 / 50 Hz|
|Damping Factor @ 2 Ω||>75 / 50 Hz|
|THD+N @ Rated Power||<1% @ 2 Ω per Ch.|
|Input Voltage Range @ RCA Inputs||Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)|
|Min.Copper Power / Ground Wire Gauge||8 AWG wire|
|Fuse Rating||20 A (AFS, AGU or MaxiFuse™)|
- Height (H): 2.05 in / 52 mm
- Width (W): 6.85 in / 174 mm
- Depth (D): 7.09 in / 180 mm
- Net Weight: 3.75 lb / 1.70 kg